CR 1030-2 : 1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
05-01-2016
01-01-1995
Introduction
1 Scope
2 Normative references
3 Definitions
4 Identification of main sources of hand-arm
vibration within the firm
5 Vibration reduction by task, product and process
re-design
6 How to select low vibration machinery, anti-vibration
systems and personal protection
7 Management measures for the control of hand-arm
vibration exposure
Annex A (informative) - Bibliography
Annex B (informative) - List of the most common machines and
processes which expose people to hand-arm vibration
Annex C (informative) - Practical example on how to select
vibration reduction measures: test of stopping a
leak in an underground main
Annex D (informative) - Practical examples of vibration
reduction measures by product design
Annex E (informative) - Practical examples of vibration
reduction measures by process design
Annex F (informative) - Practical examples of vibration
reduction by selection of machinery or
equipment
Annex G (informative) - Short list of the most important
questions that potential buyers should ask
potential suppliers with regard to hand-arm
vibration
Annex H (informative) - Practical maintenance measures that
should be taken to reduce vibration exposure
Gives practicable measures for the reduction and control of health hazards associated with exposure to hand-arm vibration at work in order to provide practical professional aid to managers and health and safety officers.
Committee |
TC 231
|
DevelopmentNote |
Also numbered as BS PD6585-2(1996). (08/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NEN NPR CR 1030-2 : 1995 | Identical |
UNE-CR 1030-2:1997 | Identical |
SN CR 1030-2 : 1995 | Identical |
S.R. CR 1030-2:1995 | Identical |
I.S. CEN TR 15350:2006 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
12/30236576 DC : 0 | BS EN 12786 - SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
CR 12349:1996 | Mechanical vibration - Guide to the health effects of vibration on the human body |
S.R. CR 1030-1:1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
EN ISO 5349-1 : 2001 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001) |
DEFSTAN 00-250(PT3)SEC1-7/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTIONS 1-7 - OVERALL CONTENTS/SCOPE |
DEFSTAN 00-250(PT1)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS |
DEFSTAN 00-250(PT3)SEC11/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 11 - TRAINING |
DEFSTAN 00-250(PT3)SEC8/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 8 - PEOPLE IN SYSTEMS |
DEFSTAN 00-250(PT3)SEC15/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 15 - WORK EQUIPMENT |
DEFSTAN 00-250(PT3)SEC9/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 9 - PEOPLE CHARACTERISTICS |
DEFSTAN 00-250(PT3)SEC10/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 10 - SYSTEMS SAFETY |
DEFSTAN 00-250(PT3)SEC13/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 13 - THE WORKPLACE |
DEFSTAN 00-250(PT3)SEC14/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 14 - THE ENVIRONMENT |
DEFSTAN 00-250(PT3)SEC12/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 12 - OPERATIONS, MAINTENANCE & SUPPORT |
DEFSTAN 00-250(PT2)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS |
DEFSTAN 00-250(PT3)SEC16/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 16 - LIVING SPACES |
00/715016 DC : DRAFT OCT 2000 | PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
UNI CEN/TR 15350 : 2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
I.S. EN 12786:2013 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARD |
VDI 3831:2012-04 | Protective measures against vibration effects on man |
I.S. EN ISO 5349-1:2002 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
PREN 12786 : DRAFT 2012 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
DIN EN 13140:2010-09 | Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety (includes Amendment A1:2009) |
DIN EN 12786:2013-05 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
BS EN ISO 5349-1:2001 | Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements |
CEN/TR 15350:2013 | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
UNI EN ISO 5349-1 : 2004 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
UNI EN 12786 : 2013 | SAFETY OF MACHINERY - REQUIREMENTS FOR THE DRAFTING OF THE VIBRATION CLAUSES OF SAFETY STANDARDS |
CSA ISO 5349-1 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
UNE-CEN/TR 15172-2:2010 IN | Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
PD CEN/TR 15350:2013 | Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
I.S. CEN/TR 15172-2:2005 | WHOLE-BODY VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
S.R. CEN/TR 15350:2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
UNE-EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
BS EN 12786:2013 | Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
PD 12349:1997 | Mechanical vibration. Guide to the health effects of vibration on the human body |
UNE-CEN/TR 15350:2013 IN | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
PD CEN/TR 15172-2:2005 | Whole-body vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
I.S. CR 12349:1996 | MECHANICAL VIBRATION - GUIDE TO THE HEALTH EFFECTS OF VIBRATION ON THE HUMAN BODY |
DIN EN 709:2011-06 | Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009) |
EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
CEN/TR 15172-2:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
ISO 5349:1986 | Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
ISO 10819:2013 | Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
EN 28662-1:1992 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL |
ISO 8662-1:1988 | Hand-held portable power tools Measurement of vibrations at the handle Part 1: General |
ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
ISO 5805:1997 | Mechanical vibration and shock — Human exposure — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.