• There are no items in your cart

CAN/CSA-C22.2 NO. 60079-30-1:17

Current
Current

The latest, up-to-date edition.

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2017

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Testing
6 Marking
7 Documentation requirements
Annex A (informative) - Type test matrix for EPLs Gb/Gc/Db/Dc
        (Refer to IEC 60079-14 for the relationship of EPLs
        to Zones)
Annex B (informative) - Checklist for installation
Annex C (normative) - Trace heater product design verification
        methodology
Annex D (normative) - Requirements for Division 1 and Division 2
        trace heating systems
Annex E (normative) - Type test matrix for Division 1 and 2
        explosive atmospheres
Bibliography

Defines general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for EPL Ga and Da.

Preface This is the second edition of CAN/CSA-C22.2 No. 60079-30-1, Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements, which is an adoption, with Canadian deviations, of the identically titled IEC/IEEE (International Electrotechnical Commission/Institute of Electrical and Electronics Engineers) Standard 60079-30-1 (first edition, 2015-09). It supersedes the previous edition published in 2014 as CAN/CSA-C22.2 No. 60079-30-1 (adopted IEC 60079-30-1:2007). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code. At the time of publication, IEC/IEEE 60079-30-1:2015 is available from IEC and IEEE in English only. CSA Group will publish the French version when it becomes available from IEC and IEEE. For brevity, this Standard will be referred to as \"CAN/CSA-C22.2 No. 60079-30-1\" throughout. This Standard is intended to be used in conjunction with CAN/CSA-C22.2 No. 60079-0, Explosive atmospheres - Part 0: Equipment - General requirements. In addition to the changes made in the IEC/IEEE Standard, this edition includes a) the addition of Canadian bonding requirements; and b) the removal of the requirement to comply with CSA C22.2 No. 130 but adding specific requirements from CSA C22.2 No. 130 to ensure correlation with the Canadian Electrical Code, Part I. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. Scope This part of IEC 60079 specifies general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for EPL Ga and Da. This Standard covers trace heaters that comprise either factory or field (work-site) assembled units, and which may be series trace heaters, parallel trace heaters, trace heater pads, or trace heater panels that have been assembled and/or terminated in accordance with the manufacturer\'s instructions. This Standard also includes requirements for termination assemblies and control methods used with trace heating systems. The explosive atmospheres referred to in this standard are those defined in IEC 60079-10-1 and IEC 60079-10-2. Annexes D and E outline the application of this standard for those users applying the Division method of area classification. This Standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence.

DocumentType
Standard
ISBN
978-1-4883-0831-4
Pages
87
PublisherName
Canadian Standards Association
Status
Current
Supersedes

C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
CSA C22.2 No. 60079-7 : 2016 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
CSA C22.2 No. 0.4 : 2004(R2013) BONDING OF ELECTRICAL EQUIPMENT
CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
ASTM D 5207 : 2014 : REDLINE Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
IEEE 515.1-2012 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEC 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
CSA C22.2 No. 2556 : 2015 WIRE AND CABLE TEST METHODS
IEEE 515-2011 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
IEC 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
IEC 62395-2:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance

View more information
US$350.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.