HYPERBARIC FACILITIES

Available format(s)

Hardcopy , PDF

Language(s)

English, French

Published date

03-01-2016

Publisher

Canadian Standards Association

Preface
1 Scope
2 Reference publications
3 Definitions
4 Chamber construction and location
5 Utilities
6 Chamber environmental air and gas systems
7 Chamber atmospheric control and monitoring
8 Built-in breathing (BIB) systems
9 Purity of gases
10 Fire prevention, protection, and extinguishing
11 Additional requirements for evacuation chambers (single
   or multiple occupancy)
12 Additional requirements for chambers in support of diving
   and caisson operations
13 Additional requirements for DDC saturation diving
14 Additional requirements for submersible (bell) diving
   systems (submersible compression chambers)
15 Additional requirements for single-occupancy chambers
16 Additional requirements for clinical applications
17 Additional requirements for research applications
18 Administration for clinical and research operations
Annex A (normative) - Exception Clauses to Section 4,
        Piping Systems, of ANSI/ASME PVHO-1
Annex B (informative) - Physical hazards
Annex C (informative) - Fire and explosion hazards
Annex D (informative) - Pressure conversion table
Annex E (informative) - Guidelines for selection,
        installation, maintenance, and cleaning of
        compressor/purification-type breathing
        air systems
Annex F (informative) - Sample collection for compressed
        breathing air analysis
Annex G (informative) - Recommended analytical procedures
        for the analysis of compressed breathing air
Annex H (informative) - Moisture content in compressed
        breathing air at typical user pressures

This Standard applies to hyperbaric chambers that have as their primary function the subjection ofhumans to pressure environments exceeding 1 atmosphere absolute, such as those required in divingoperations, work under compressed-air conditions, medical treatment, training, and research.

DevelopmentNote	French Edition issued on 01-09-2016. (10/2016)
DocumentType	Standard
ISBN	978-1-4883-0292-3
Pages	120
PublisherName	Canadian Standards Association
Status	Current
SupersededBy	CSA Z275.2 : 2018
Supersedes	CSA Z275.1 : 2005 : R2012

CSA Z275.4 :2012	COMPETENCY STANDARD FOR DIVING, HYPERBARIC CHAMBER, AND REMOTELY OPERATED VEHICLE OPERATIONS
CSA Z275.3 : 2009	OCCUPATIONAL SAFETY CODE FOR WORK IN COMPRESSED AIR ENVIRONMENTS
CSA Z275.3 : 2009 : R2014	OCCUPATIONAL SAFETY CODE FOR WORK IN COMPRESSED AIR ENVIRONMENTS
Z275.4-12 (R2017)	Competency standard for diving, hyperbaric chamber, and remotely operated vehicle operations
Z275.5-13 (R2018)	Occupational diver training
CSA Z275.2 : 2015	OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS
ADIVP-01 : 2014	ALLIED GUIDE TO DIVING OPERATIONS
Z7396.1-17	Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems
CSA Z305.1 : 0	NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
CSA Z8000 : 2011 : R2016	CANADIAN HEALTH CARE FACILITIES
CSA Z8000 : 2011	CANADIAN HEALTH CARE FACILITIES
CSA Z8000 : 2011 : INC : UPD 1 : 2013	CANADIAN HEALTH CARE FACILITIES
Z1010-18	Management of work in extreme conditions
CSA Z275.4 : 2012 : INC : UPD 1 : 2012	COMPETENCY STANDARD FOR DIVING, HYPERBARIC CHAMBER, AND REMOTELY OPERATED VEHICLE OPERATIONS

IMCA D 002 : JAN 1996	BATTERY PACKS IN PRESSURE HOUSINGS
IMCA D 027 : APR 2002	MARKING OF HYPERBARIC RESCUE SYSTEMS DESIGNED TO FLOAT IN WATER
IMCA D 008 : APR 1996	TESTING OF THROUGH WATER COMMUNICATIONS
IMCA D 012 : JAN 1998	STAINLESS STEEL IN OXYGEN SYSTEMS
IMCA D 023 : JAN 2014	DESIGN FOR SURFACE ORIENTATED (AIR) DIVING SYSTEMS
IMCA D 004 : DEC 1995	THE INITIAL AND PERIODIC EXAMINATION, TESTING AND CERTIFICATION OF HYPERBARIC EVACUATION LAUNCH SYSTEMS
Z7396.1-17	Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems
NFPA 701 : 2015	FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS
B340-14	Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, class 2
C22.1-15	Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
CSA B51 : 2014	BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
IMCA D 031 : MAY 2003	CLEANING FOR OXYGEN SERVICE: SETTING UP FACILITIES AND PROCEDURES
B339-14	Cylinders, spheres, and tubes for the transportation of dangerous goods
IMCA D 050 : MAY 2012	MINIMUM QUANTITIES OF GAS REQUIRED OFFSHORE
CSA Z94.2 : 2014	HEARING PROTECTION DEVICES - PERFORMANCE, SELECTION, CARE, AND USE
CSA Z275.2 : 2015	OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS
IMCA D 015 : MAY 1998	MOBILE/PORTABLE SURFACE SUPPLIED SYSTEMS
NFPA 53 : 2016	MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
IMCA D 051 : OCT 2014	HYPERBARIC EVACUATION SYSTEMS (HES) INTERFACE RECOMMENDATIONS
CGA C 6.2 : 2013	STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS
IMCA D 014 : FEB 2014	IMCA INTERNATIONAL CODE OF PRACTICE FOR OFFSHORE DIVING
CGA C 6.1 : 2013 COR 2015	STANDARD FOR VISUAL INSPECTION OF HIGH PRESSURE ALUMINUM ALLOY COMPRESSED GAS CYLINDERS
ASME PVHO 1 : 2016	SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY
IMCA D 052 : MAY 2013	GUIDANCE ON HYPERBARIC EVACUATION SYSTEMS
CSA Z180.1 : 2013	COMPRESSED BREATHING AIR AND SYSTEMS
IMCA D 046 : SEP 2010	GUIDANCE ON OPERATIONAL COMMUNICATIONS
NFPA 99 : 2018	HEALTH CARE FACILITIES CODE
IMCA D 053 : 2014	DESIGN FOR THE HYPERBARIC RECEPTION FACILITY (HRF) FORMING PART OF A HYPERBARIC EVACUATION SYSTEM (HES)
IMCA D 011 : DEC 2010	ANNUAL AUDITING OF DIVING SYSTEMS
IMCA D 054 : OCT 2014	REMOTELY OPERATED VEHICLE INTERVENTION DURING DIVING OPERATIONS
CGA C 6 : 2013	STANDARD FOR VISUAL INSPECTION OF STEEL COMPRESSED GAS CYLINDERS
ASME PVHO 2 : 2016	SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES
CSA Z32 : 2015	ELECTRICAL SAFETY AND ESSENTIAL ELECTRICAL SYSTEMS IN HEALTH CARE FACILITIES
IMCA D 018 : JUNE 2014	CODE OF PRACTICE FOR THE INITIAL AND PERIODIC EXAMINATION, TESTING AND CERTIFICATION OF DIVING PLANT AND EQUIPMENT
CGA C 1 : 2016	METHODS FOR PRESSURE TESTING COMPRESSED GAS CYLINDERS
IMCA D 024 : MAR 2013	DESIGN FOR SATURATION (BELL) DIVING SYSTEMS

View more information

US$140.00

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

CSA Z275.1 : 2016

HYPERBARIC FACILITIES

Table of Contents

Abstract

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory