• There are no items in your cart

CSA Z305.1 : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
Available format(s)

Hardcopy , PDF

Superseded date

07-01-2006

Language(s)

English

Technical Committee on Medical Gas Systems
Subcommittee on Nonflammable Medical Gas Piping Systems
Preface
Foreword
1 Scope
2 Definitions and Reference Publications
   2.1 Definitions
   2.2 Reference Publications
Part I - Construction and Performance
3 General
   3.1 Medical Gas Supply
   3.2 Medical Gas Piping System
   3.3 Auxiliary Sources of Supply
   3.4 Emergency Supply
   3.5 Electrical
   3.6 Materials Compatibility
4 Source of Supply
   4.1 General
   4.2 Central Supply System
   4.3 Control Equipment
   4.4 Shut-Off Valves
   4.5 Location of Central Supply System
5 Pipeline Distribution System
   5.1 Materials
   5.2 Pipe Sizes
   5.3 Piping Support
   5.4 Pipe Fittings
   5.5 Joints
   5.6 Identification of Medical Gas Pipelines
   5.7 Cleaning
6 Terminal Units
Part II - Installation
7 General
8 Documentation
9 Manuals
10 Verification by Installers
Part III - Certification
11 General
12 Certification Requirements
   12.1 Detailed Inspection
   12.2 General
   12.3 Additions and Alterations
   12.4 Report
Part IV - Maintenance
13 General
14 Detailed Requirements
   14.1 Sources of Supply
   14.2 Control Equipment
   14.3 Terminal Units
   14.4 Standing Pressure
   14.5 Purity
Part V - Testing
15 Methods and Requirements
   15.1 General
   15.2 Pressure
   15.3 Cross-Connection
   15.4 Concentration
   15.5 Contaminants
   15.6 Test for Minimum Flow Requirements of Terminal
        Units
Part VI - Special Requirements for Non-hospital-based
          Nitrous Oxide/Oxygen Piping Systems
16 Medical Gas Supply
   16.1 General
   16.2 Control Equipment
   16.3 Medical Gas Piping System
17 Source of Supply
18 Pipeline Distribution Systems
19 Medical Gas Terminal Units
20 Testing
Part VII - Laboratories
21 General
Part VIII - Existing Systems
22 General
23 Additions
24 Repairs or Alterations
Tables
Figures
Appendices
A - Pipe Size Charts
B - Dimensions, Mass, and Tolerances in Diameter and Wall
    Thickness for Nominal or Standard Copper Water Tube
    Sizes
C - Typical Health Care Facility Medical Gas Piping
    Systems
D - Symbols
E - Recommended Practice for Installers
F - Suggested Terminal Unit Distribution Chart
G - Information on Compressor Packages
H - Bibliography

Applicable to medical gas piping systems for conducting nonflammable medical gases used for patient care in health care facilities. Included in this Standard are requirements pertaining to small systems such as those serving dental suites, as well as systems providing nonflammable medical gases to laboratories.

DocumentType
Standard
Pages
102
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy

CSA Z441 : 1988 TERMINOLOGY AND DEFINITIONS USED IN CSA HEALTH CARE TECHNOLOGY STANDARDS
CSA Z168.11 : 0 VACUUM DEVICES USED FOR SUCTION AND DRAINAGE
PLUS 317 (1st ed. pub. 2000) Guidelines for Elementary Assessments of Building Systems in Health Care Projects
CSA Z10651.6 : 2006 : R2015 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
CSA Z10651.6 :2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
CSA Z305.4 : 0 QUALIFICATION REQUIREMENTS FOR AGENCIES TESTING NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
CSA Z168.5.1 : 1997 ANAESTHESIA VENTILATORS
CGSB 24.2 : M86 IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES
CSA Z305.2 : 0 LOW-PRESSURE CONNECTING ASSEMBLIES FOR MEDICAL GAS SYSTEM
CSA Z168.3 : 1997 ANAESTHETIC MACHINES FOR MEDICAL USE
CSA Z168.8 : 0 ANAESTHETIC GAS SCAVENGING SYSTEMS
CSA Z318.6 : 0 COMMISSIONING OF MEDICAL GAS SYSTEMS IN HEALTH CARE FACILITIES
CSA Z10651.6 : 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES
Z305.12-06 (R2017) Safe Storage, Handling, and Use of Portable Oxygen Systems in Residential Buildings and Health Care Facilities
CSA Z305.6 : 1992 MEDICAL OXYGEN CONCENTRATOR CENTRAL SUPPLY SYSTEM FOR USE WITH NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
CSA B51S1 : 2005 SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
CSA Z10651.2: 2006 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
CSA Z8835.5 : 2006 INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
ASTM F 2319 : 2004 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013)
04/30088537 DC : DRAFT SEP 2004 PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM
CSA Z168.5.3 : 0 NEONATAL VENTILATORS
CSA Z305.3 : 0 PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES
CSA Z305.12 : 2006 SAFE STORAGE, HANDLING, AND USE OF PORTABLE OXYGEN SYSTEMS IN RESIDENTIAL BUILDINGS AND HEALTH-CARE FACILITIES
CSA Z10651.2 : 2006 : R2015 LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
ASTM B 819 : 2018 : REDLINE Standard Specification for Seamless Copper Tube for Medical Gas Systems

CSA Z305.2 : 0 LOW-PRESSURE CONNECTING ASSEMBLIES FOR MEDICAL GAS SYSTEM
CSA Z305.3 : 0 PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES
CSA Z32.4 : M86 ESSENTIAL ELECTRICAL SYSTEMS FOR HOSPITALS
CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
CGSB 1-GP-12C : 1990 STANDARD PAINT COLORS: CHROMATICITIES AND LUMINOUS REFLECTANCES
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
CGSB 24.2 : M86 IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ANSI S1.4 : 1983 SPECIFICATION FOR SOUND LEVEL METERS
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
ISO 10083:2006 Oxygen concentrator supply systems for use with medical gas pipeline systems
NFPA 50 : 2001 BULK OXYGEN SYSTEMS AT CONSUMER SITES
CSA Z180.1 : 2013 COMPRESSED BREATHING AIR AND SYSTEMS
CSA Z168.3 : 1997 ANAESTHETIC MACHINES FOR MEDICAL USE
CSA Z305.4 : 0 QUALIFICATION REQUIREMENTS FOR AGENCIES TESTING NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
CSA Z275.1 : 2016 HYPERBARIC FACILITIES
CSA Z305.5 : 85(R1997) MEDICAL GAS TERMINAL UNITS
CSA Z168.8 : 0 ANAESTHETIC GAS SCAVENGING SYSTEMS
CGA V 5 : 2008(R2013) DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS)
CSA Z321 : 0 SIGNS AND SYMBOLS FOR THE WORKPLACE
CGA P 21 : 2009(R2015) GUIDELINES FOR THE DEVELOPMENT OF PRE-TRIP INSPECTION CHECKLIST AND REPORTS FOR MC-338, TC-338, TC-341, AND CGA-341 CARGO TANKS
CGA P2 : 0 TESTING METHOD FOR MEASURING ANNUAL FUEL UTILIZATION EFFICIENCIES OF RESIDENTIAL FURNACES AND BOILERS
CGA G 4.1 : 2009 CLEANING EQUIPMENT FOR OXYGEN SERVICE
CGA V 6 : 2014 STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS
CSA Z305.6 : 1992 MEDICAL OXYGEN CONCENTRATOR CENTRAL SUPPLY SYSTEM FOR USE WITH NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS
AWS A5.8 : 1992 FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR
CGA G 8.1 : 2013 STANDARD FOR NITROUS OXIDE SYSTEMS AT CUSTOMER SITES
CGA V 6.1 : 2007 STANDARD CARBON DIOXIDE TRANSFER CONNECTIONS

View more information
US$95.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.