• There are no items in your cart

CAN/CSA-Z662-15

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Oil and gas pipeline systems
Available format(s)

Hardcopy , PDF

Superseded date

04-25-2020

Language(s)

English, French

Published date

01-01-2015

Preface
1 Scope
2 Reference publications and definitions
3 Safety and loss management systems
4 Design
5 Materials
6 Transportation, handling, and installation
7 Joining
8 Pressure testing
9 Corrosion control
10 Operating, maintenance, and upgrading
11 Offshore steel pipelines
12 Gas distribution systems
13 Reinforced composite, thermoplastic-lined, and polyethylene
   pipelines
14 Steam distribution pipelines and high temperature pipelines
15 Aluminum piping
16 Sour service pipelines
17 Composite-reinforced steel pipelines
Annex A (informative) - Safety and loss management system
Annex B (informative) - Guidelines for risk assessment of
        pipeline systems
Annex C (informative) - Limit states design
Annex D (informative) - Guidelines for in-line inspection of
        pipelines
Annex E (informative) - Recommended practice for liquid
        hydrocarbon pipeline leak detection
Annexes F and G have been deleted
Annex H (normative) - Pipeline failure records
Annex I (informative) - Oilfield steam distribution
        pipelines - Alternate provisions
Annex J (informative) - Recommended practice for determining
        the acceptability of imperfections in fusion welds using
        engineering critical assessment
Annex K (informative) - Standards of acceptability for
        circumferential pipe butt welds based upon fracture
        mechanics principles
Annex L (informative) - Alternative or supplementary test
        methods for coating property and characteristics
        evaluation
Annex M (informative) - Guidance for system control,
        monitoring, and protection of hydrocarbon pipeline
        systems
Annex N (informative) - Guidelines for pipeline system integrity
        management programs
Annex O (informative) - Reliability-based design and
        assessment (RBDA) of onshore non-sour service natural
        gas transmission pipelines
Annex P (informative) - Development and qualification of
        welding procedure specifications
Commentary

Overview Safely transporting energy products over long distances via pipelines is a key component in the success of Canada’s oil and natural gas industry. Since its first edition in 1994, CSA Z662 - Oil and Gas Pipeline Systems is the culmination over 40 years of pipeline standards development. CSA Z662 was created to help provide guidance on the safe design, construction and maintenance of pipeline systems used for: • Liquid hydrocarbons, including crude oil, multi-phase fluids, condensate, liquid petroleum products • Natural gas liquids and liquefied petroleum gas • Oilfield water/steam • Carbon dioxide used in oilfield enhanced recovery schemes • Gas CSA Z662 is referenced in legislation by provinces, territories and the federal government, thus making it critical for all industry professionals to understand and apply the requirements of this new edition upon its publication. This package includes expert commentary directly in the standard document, making it your comprehensive resource when working on pipeline projects in compliance with this national standard. Why you Need to Know the 2015 Edition: • Scope has been expanded to further recognize CO2 pipeline systems to help users to implement carbon capture and storage schemes in their projects • Updated requirements for safety and loss management systems, integrity management programs and the engineering assessments process to help reduce risk, provide safer communities, improve efficiencies and raise stakeholder awareness of potential safety issues • Greater clarification of requirements for mitigation programs for internal corrosion to help reduce risk and improve reliability • New requirements for training and certification of field-applied coating applicators with reference to CSA Z245.30 - Field-applied external coatings for steel pipeline systems to help ensure all personnel involved in working with these applicators are well-trained in the specific tasks associated with them • Greater clarification of requirements for steam distribution pipelines and high temperature pipelines (Clause 14) to help improve efficiencies and reduce risk • Includes expert commentary clearly providing rationale statements and explanatory material for many of the clauses of this standard

Preface This is the seventh edition of CSA Z662, Oil and gas pipeline systems. It supersedes the previous editions published in 2011, 2007, 2003, 1999, 1996, and 1994. The following are the most significant changes, relative to the previous edition: a) updating and revising the requirements for safety and loss management systems, integrity management programs, and engineering assessments process. This resulted in significant changes to Clause 3 to clarify the requirements and highlight that requirements for safety and loss management system and for the pipeline system integrity management program must address the full lifecycle of a pipeline, including design, material selection, construction, operation, and maintenance; b) clarification of the requirements for mitigation programs for internal corrosion and monitoring of the effectiveness of the programs when pipelines are susceptible to internal corrosion (Clause 9); c) new requirements for training and certification of field applied coating applicators through a Clause 9 reference to CSA Z245.30; d) clarification of requirements for steam distribution pipelines and high temperature pipelines (Clause 14); e) broader inclusion of, and additional requirements for, CO2 pipelines; f) further requirements for abandonment of pipelines (Clause 10); g) new requirements for addressing ripples and wrinkles, buckles, and out of roundness on pipe (Clause 10); h) clarification of the requirements for reinforced composite, thermoplastic-lined, and polyethylene pipelines; i) clarification of the sour service requirements for gas-free pipeline systems for crude oil, crude oil blends, and low vapour pressure condensate (Clause 16); j) updating of the requirements for leak detection on liquid hydrocarbon pipelines previously published in Update 3 (August 2013) to CSA Z662-11. The recommended practice considers computational methods and direct leak detection methods (Annex E); k) expansion of Annex M to address system control, monitoring, and protection for all hydrocarbon pipelines; and l) new Annex P to provide guidance on the development and qualification of welding procedure specifications. The requirements of this Standard are considered to be adequate under conditions normally encountered in the oil and natural gas industry. Specific requirements for abnormal or unusual conditions are not prescribed, nor are all details related to engineering and construction prescribed. It is intended that all work performed within the scope of this Standard meet the standards of safety and integrity expressed or implied herein, and that the requirements of this Standard be applied with due regard to the protection of the environment, which includes land, water, plant life, and animal life. Detailed requirements concerning the protection of the environment are not prescribed. It is expected that changes will be made from time to time, based on new experience and technology. Where necessary, amendments and supplements will be prepared by the Technical Committee and published in accordance with CSA Group practices. This Standard was prepared by the Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials, under the jurisdiction of the Strategic Steering Committee on Petroleum and Natural Gas Industry Systems, and has been formally approved by the Technical Committee. Scope 1.1 This Standard covers the design, construction, operation, maintenance, deactivation, and abandonment of oil and gas industry pipeline systems that convey a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas; b) oilfield water; c) oilfield steam; d) liquid or dense phase carbon dioxide; or e) gas. Notes: 1) Vapour phase carbon dioxide pipeline systems fall under Item e). 2) Designers are cautioned that the requirements in this Standard might not be appropriate for gases other than natural gas, manufactured gas, vapour phase carbon dioxide, and synthetic natural gas. 1.2 The scope of this Standard, as shown in Figures 1.1 and 1.2, includes a) for oil industry fluids, piping and equipment in offshore pipelines, onshore pipelines, tank farms, pump stations, pressure-regulating stations, and measuring stations; b) oil pump stations, pipeline tank farms, and pipeline terminals; c) pipe-type storage vessels; d) carbon dioxide pipelines; e) for gas industry fluids, piping and equipment in offshore pipelines, onshore pipelines, compressor stations, measuring stations, and pressure-regulating stations; f) gas compressor stations; and g) gas storage lines and pipe-type and bottle-type gas storage vessels. 1.3 This Standard does not apply to a) piping with metal temperatures below -70 °C; b) gas piping beyond the outlet of the customer\'s meter set assembly (covered by CSA B149.1); c) piping in natural gas liquids extraction plants, gas processing plants (except main gas stream piping in dehydration and all other processing plants installed as part of gas pipeline systems), gas manufacturing plants, industrial plants, and mines; d) oil refineries, terminals other than pipeline terminals, and marketing bulk plants; e) abandoned piping; f) in-plant piping for drinking, make-up, or boiler feed water; g) casing, tubing, or pipe in oil or gas wells, wellheads, separators, production tanks, and other production facilities; h) vent piping for waste gases of any kind operating at or near atmospheric pressure; i) heat exchangers; j) liquefied natural gas systems (covered by CSA Z276); k) liquid fuel distribution systems; l) loading/unloading facilities for tankers or barges; m) refuelling facilities; and n) hydrocarbon storage in underground formations and associated equipment (covered by CSA Z341 Series). 1.4 This Standard is intended to establish essential requirements and minimum standards for the design, construction, operation, and maintenance of oil and gas industry pipeline systems. This Standard is not a design handbook, and competent engineering judgment should be employed with its use. Note: For steel pipe of grade higher than Grade 555, requirements in addition to those specified in this Standard might be needed. Matters that should be considered include joining, thermal aging effects during coating application, strain capacity (including cold bending), pressure testing, assessment of imperfections, and repair. 1.5 The requirements of this Standard are applicable to the operation, maintenance, and upgrading of existing installations. It is not intended that such requirements be applied retroactively to existing installations insofar as design, materials, construction, and established operating pressures are concerned, except as required by Clause 10.7.1 for changes in class location and Clause 10.8.1 for crossings of existing pipelines. 1.6 Unless otherwise stated, to determine conformance with the specified requirements, it is intended that observed or calculated values be rounded to the nearest unit in the last right-hand place of figures used in expressing the limiting value, in accordance with the rounding method of ASTM E29. 1.7 Where any requirements of this Standard are at variance with the requirements of other publications referenced in this Standard, it is intended that the requirements of this Standard govern. 1.8 It is not the intent of this Standard to prevent the development of new equipment or practices, or to prescribe how such innovations are to be handled. 1.9 In this Standard, \"shall\" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; \"should\" is used to express a recommendation or that which is advised but not required; and \"may\" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

DevelopmentNote
2015 Edition includes Commentary to CSA Z662, which was previously published as CSA Z662.1. Supersedes CSA Z662 PACKAGE. (06/2015) French Edition issued on 01-01-2016. (04/2016)
DocumentType
Standard
Pages
865
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy
Supersedes

BS ISO 27914:2017 Carbon dioxide capture, transportation and geological storage. Geological storage
BS ISO 13574:2015 Industrial furnaces and associated processing equipment. Vocabulary
CSA C22.3 No. 6 : 2013 : INC : ERR ATA : 2014 PRINCIPLES AND PRACTICES OF ELECTRICAL COORDINATION BETWEEN PIPELINES AND ELECTRIC SUPPLY LINES
17/30293106 DC : 0 BS EN ISO 19345-2 - PETROLEUM AND NATURAL GAS INDUSTRY - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE INTEGRITY MANAGEMENT SPECIFICATION - PART 2: FULL-LIFE CYCLE INTEGRITY MANAGEMENT FOR OFFSHORE PIPELINE
CSA Z245.6:2006 COILED ALUMINUM LINE PIPE AND ACCESSORIES
CSA C22.3 No. 6 : 2013 PRINCIPLES AND PRACTICES OF ELECTRICAL COORDINATION BETWEEN PIPELINES AND ELECTRIC SUPPLY LINES
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
CSA Z245.30 : 2014 FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
NACE SP 01 10 : 2010 WET GAS INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT
CSA Z246.1 : 2017 SECURITY MANAGEMENT FOR PETROLEUM AND NATURAL GAS INDUSTRY SYSTEMS
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
CSA Z341 SERIES : 2014 STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS
ISO 27913:2016 Carbon dioxide capture, transportation and geological storage Pipeline transportation systems
BS ISO 27913:2016 Carbon dioxide capture, transportation and geological storage. Pipeline transportation systems
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
API RP 1175 & COMPANION GUIDE BUNDLE : 1ED 2017 RECOMMENDED PRACTICE FOR PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT, AND COMPANION GUIDE BUNDLE
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
CAN/CSA-C22.3 NO. 6-13 (R2017) Principles and practices of electrical coordination between pipelines and electric supply lines
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
15/30292338 DC : 0 BS ISO 27913 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - PIPELINE TRANSPORTATION SYSTEMS
API RP 1130 : 2007(R2012) COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
Z245.15-17 Steel valves
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
ASTM F 2619/F2619M : 2013 : REDLINE Standard Specification for High-Density Polyethylene (PE) Line Pipe
CSA B836 : 2014 STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES
CSA B108 : 2014 COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE
AWWA C906:2015 POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS
ISO 27914:2017 Carbon dioxide capture, transportation and geological storage Geological storage
ASTM E 1961 : 2016 : REDLINE Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
CSA B139 : 2015 INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
CSA B51S1 : 2005 SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
C22.10-10 Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments
API 1130 : 2007 COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS
12/30249472 DC : 0 BS ISO 13574 - INDUSTRIAL FURNACES AND ASSOCIATED THERMAL PROCESSING EQUIPMENT - VOCABULARY
NACE 3510:2017/Corrected Version:2022 IN-LINE INSPECTION OF PIPELINES
CAN/CSA-Z767-17 Process safety management
CSA Z341 SERIES-14 PACKAGE : 2014 CONSISTS OF Z341 SERIES-14, STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS AND Z341.4-14, SALT CAVERN WASTE DISPOSAL
CSA B836:14 (R2019) Storage, handling, and dispensing of aviation fuels at aerodromes
CSA PLUS 663 : 2004 LAND USE PLANNING FOR PIPELINES: A GUIDELINE FOR LOCAL AUTHORITIES, DEVELOPERS, AND PIPELINE OPERATORS
ISO 13574:2015 Industrial furnaces and associated processing equipment — Vocabulary
CSA B149HB : 2005 NATURAL GAS AND PROPANE CODE HANDBOOK
CSA B149.1 : 2010 : R2015 NATURAL GAS AND PROPANE INSTALLATION CODE
CSA B149.1 : 2010 NATURAL GAS AND PROPANE INSTALLATION CODE
ANSI/CSA-B149.6-15 Code for digester gas, landfill gas, and biogas generation and utilization
API RP 1175 : 2015 PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT
API RP 1177 : 2017 RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS
CSA Z460 : 2013 CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS
CSA Z245.1 : 2014 STEEL PIPE
CSA Z245.6 : 2006 : R2016 COILED ALUMINUM LINE PIPE AND ACCESSORIES
CSA Z741 :2012 GEOLOGICAL STORAGE OF CARBON DIOXIDE
CSA Z741 : 2012 : R2017 GEOLOGICAL STORAGE OF CARBON DIOXIDE
CSA Z245-12 : 2017 STEEL FLANGES
CSA Z245-11 : 2017 STEEL FITTINGS
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
ASME STP-PT-049 : 2012 INVESTIGATION OF TEMPERATURE DERATING FACTORS FOR HIGH-STRENGTH LINE PIPE

NACE SP 02 85 : 2011 “Corrosion Control of Underground Storage Tank Systems by Cathodic Protection”
BS EN 253 : 2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
ASME PV CODE 8 DIV 2 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
ISO 14555:2017 Welding — Arc stud welding of metallic materials
BS 7448-1:1991 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
W59-13 Welded steel construction (metal arc welding)
API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
ASTM UOP 163 : 2010 Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
CFR 33(PTS1-199) : JUL 89 NAVIGATION AND NAVIGABLE WATERS
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ISO 15653:2010 Metallic materials Method of test for the determination of quasistatic fracture toughness of welds
AWWA C205 : 2012 CEMENT-MORTAR PROTECTIVE LINING AND COATING FOR STEEL WATER PIPE - 4 IN. (100 MM) AND LARGER - SHOP APPLIED
ISO 16708:2006 Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods
CSA Z245.30 : 2014 FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS
ISO 12176-3:2011 Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 3: Operator's badge
ASME B31.1 : 2016 POWER PIPING
MSS SP 6 : 2017 STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS
ISO 13953:2001 Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
CSA A3000 : 2013 CEMENTITIOUS MATERIALS COMPENDIUM
ASTM G 8 : 1996 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
CSA Z169 : M78(R1992) ALUMINUM PIPE AND PRESSURE PIPING SYSTEMS
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ASTM G 21 : 2015 : REDLINE Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
MSS SP 83 : 2014 CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS)
API 1156 : 1ED 97 ADD 1 99 EFFECTS OF SMOOTH AND ROCK DENTS ON LIQUID PETROLEUM PIPELINES (PHASE 2)
NACE RP 01 1975:1975 CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS
ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ISO 12176-4:2003 Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 4: Traceability coding
API 576 : 2017 INSPECTION OF PRESSURE-RELIEVING DEVICES
ASTM D 4541 : 2017 : REDLINE Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
ASTM A 694/A694M : 2016 : REDLINE Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
NACE SP 05 02 : 2010 PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
API SPEC 15HR : 2016 HIGH-PRESSURE FIBERGLASS LINE PIPE
API RP 1167 : 2016 PIPELINE SCADA ALARM MANAGEMENT
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
API 653 : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
ISO 2394:2015 General principles on reliability for structures
ISO 3898:2013 Bases for design of structures — Names and symbols of physical quantities and generic quantities
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ASTM E 114 : 2015 : REDLINE Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM A 707/A707M : 2014 : REDLINE Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
CSA W48 : 2014 FILLER METALS AND ALLIED MATERIALS FOR METAL ARC WELDING
CSA Z187 : M87(R1992) OFFSHORE PIPELINES
ASME B31.3:2016 PROCESS PIPING
ISO 12176-1:2017 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
ISO 9080:2012 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
NACE SP 02 06 : 2016 INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES CARRYING NORMALLY DRY NATURAL GAS (DG-ICDA)
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
CSA Z276 : 2015 LIQUEFIED NATURAL GAS (LNG) - PRODUCTION, STORAGE, AND HANDLING
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
ANSI B109.1 : 2000 DIAPHRAGM TYPE GAS DISPLACEMENT METERS (500 CUBIC FOOT PER HOUR CAPACITY AND UNDER)
CFR 49(PTS186-199) : 0 TRANSPORTATION
AWS A5.1 : 91(R1999) SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
ASTM D 3895 : 2014 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
API 5L : 2012 LINE PIPE
ASTM D 3839 : 2014 : REDLINE Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
API 651 : 2014 CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS
ISO 5579:2013 Non-destructive testing Radiographic testing of metallic materials using film and X- or gamma rays Basic rules
ISO 12176-2:2008 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
NACE SP 02 04 : 2015 STRESS CORROSION CRACKING (SCC) DIRECT ASSESSMENT METHODOLOGY
Z245.15-17 Steel valves
ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
ASTM D 1525 : 2017 Standard Test Method for Vicat Softening Temperature of Plastics
NFPA 10 : 2018 PORTABLE FIRE EXTINGUISHERS
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
API 2350 : 2012 OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
NACE RP 06 75 : 1988 CORROSION CONTROL OF OFFSHORE STEEL PIPELINES
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
S408-11 Guidelines for the development of limit states design standards
ASME PV CODE 2D METRIC : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC)
API 608 : 2012 METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
AWS D3.6M : 2010 UNDERWATER WELDING CODE
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
API Q1 : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
CSA Z246.1 : 2017 SECURITY MANAGEMENT FOR PETROLEUM AND NATURAL GAS INDUSTRY SYSTEMS
ASTM F 2634 : 2015 : REDLINE Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
W178.2-14 Certification of welding inspectors
ASME B31.8S : 2016 MANAGING SYSTEM INTEGRITY OF GAS PIPELINES
CSA Z245.1 : 2014 STEEL PIPE
CSA Z184 : M92 GAS PIPELINE SYSTEMS
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
ASTM G 42 : 2011 : REDLINE TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
API 2015 : 2014 REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS
ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water Training and assessment of fusion operators
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
CSA ISO 9001 : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
BS 7448-2:1997 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
ASME PV CODE 5 : 2017 BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
CSA PLUS 663 : 2004 LAND USE PLANNING FOR PIPELINES: A GUIDELINE FOR LOCAL AUTHORITIES, DEVELOPERS, AND PIPELINE OPERATORS
ASME B16.49 : 2012 FACTORY-MADE, WROUGHT STEEL, BUTTWELDING INDUCTION BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS
ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM D 2290 : 2016-12 TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE
ISO 14175:2008 Welding consumables — Gases and gas mixtures for fusion welding and allied processes
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
ASTM D 257 : 2014 : REDLINE Standard Test Methods for DC Resistance or Conductance of Insulating Materials
API TR 1149 : 2015 PIPELINE VARIABLE UNCERTAINTIES AND THEIR EFFECTS ON LEAK DETECTABILITY
AWS A5.32/A5.32M : 2011 WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
CGSB 48.9712 : 2014 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF PERSONNEL
CSA Z341 SERIES : 2014 STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS
API 572 : 2016 INSPECTION PRACTICES FOR PRESSURE VESSELS
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
BS EN 489:2009 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASME PV CODE SET : 2017 BOILER AND PRESSURE VESSEL CODE - COMPLETE SET
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
CSA Z245-11 : 2013 STEEL FITTINGS
MSS SP 79 : 2011 SOCKET WELDING REDUCER INSERTS
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
ASTM D 1000 : 2017 : REDLINE Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D 2992 : 2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
NEN 3650-1 : 2012 + C1 2017 REQUIREMENTS FOR PIPELINE SYSTEMS - PART 1: GENERAL REQUIREMENTS
PD 8010-1:2004 Code of practice for pipelines Steel pipelines on land
CSA S471 : 2004 GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
CSA Z245-12 : 2013 STEEL FLANGES
API 652 : 2014 LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS
ASTM D 1653 : 2013 : REDLINE Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 5064 : 2016-08 PRACTICE FOR CONDUCTING A PATCH TEST TO ASSESS COATING COMPATIBILITY
ASTM G 19 : 2004 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010)
ASTM D 1693 : 2015 : REDLINE Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASME B16.48 : 2015 LINE BLANKS

View more information
US$798.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.