CSA Z96 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-13-2020
English, French
01-01-2015
Preface
1 Scope
2 Reference publications
3 Definitions
4 Garment class and design
5 Requirements for background and combined-performance
retroreflective materials
6 Photometric and physical performance requirements for
retroreflective materials
7 Test methods
8 Care labelling
9 Marking
10 Instructions for use
Annex A (informative) - Selection, use, and care guidelines
Annex B (informative) - Examples of CSA Z96-compliant
apparel
Annex C (informative) - Sample CSA Z96 compliance
self-declaration forms
Defines requirements for occupational apparel that is: a) capable of signalling the users presence visually; and b) intended to provide the user with conspicuity in hazardous situations under any light conditions and under illumination by vehicle headlights.
DevelopmentNote |
French Edition issued on 01-06-2016. (06/2016)
|
DocumentType |
Standard
|
Pages |
55
|
PublisherName |
Canadian Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CSA Z1002 : 2012 : INC : UPD 2 : 2014 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
CAN/CSA-Z1002-12 (R2017) | Occupational health and safety - Hazard identification and elimination and risk assessment and control |
CAN//CSA-Z1001-18 | OCCUPATIONAL HEALTH AND SAFETY TRAINING |
CSA Z94.1 : 2015 | INDUSTRIAL PROTECTIVE HEADWEAR - PERFORMANCE, SELECTION, CARE, AND USE |
CSA Z1006:16 (R2020) | Management of work in confined spaces |
CSA Z1002 : 2012 : INC : UPD 1 : 2013 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
CSA Z1006 : 2016 | MANAGEMENT OF WORK IN CONFINED SPACES |
ISO 11393-6:2007 | Protective clothing for users of hand-held chain-saws Part 6: Test methods and performance requirements for upper body protectors |
CSA Z96.1 : 2008 | GUIDELINE ON SELECTION, USE, AND CARE OF HIGH-VISIBILITY SAFETY APPAREL |
CSA Z1002 : 2012 | OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL |
CSA Z96.1 : 2008 : R2013 | GUIDELINE ON SELECTION, USE, AND CARE OF HIGH-VISIBILITY SAFETY APPAREL |
AATCC TM 35 : 2013 | WATER RESISTANCE: RAIN TEST |
AATCCTM107:2013e2:2019 | COLORFASTNESS TO WATER |
ASTM D 3787 : 2016 : REDLINE | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
EN 530:2010 | Abrasion resistance of protective clothing material - Test methods |
ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
CGSB 4.2-23 : M1990(R2013) | TEXTILE TEST METHODS - COLOURFASTNESS TO PERSPIRATION |
ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
ISO 13937-1:2000 | Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
AATCC TM 15 : 2013e | COLORFASTNESS TO PERSPIRATION |
ISO 4675:2017 | Rubber- or plastics-coated fabrics — Low-temperature bend test |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
AATCC TM163:2013e:2019 | COLORFASTNESS: DYE TRANSFER IN STORAGE; FABRIC-TO-FABRIC |
CGSB 4.2-22 : 2004(R2013) | TEXTILE TEST METHODS - COLOURFASTNESS TO RUBBING (CROCKING) |
CGSB 4.2-57 : M1990(R2013) | TEXTILE TEST METHODS - DETERMINATION OF MAXIMUM SAFE IRONING TEMPERATURE |
CGSB 4.2-19.1 : 2004(R2013) | TEXTILE TEST METHODS - COLOURFASTNESS TO WASHING - ACCELERATED TEST - LAUNDEROMETER |
ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
CGSB 86.1 : 2003 | CARE LABELLING OF TEXTILES |
CGSB 4.2-26.2 : 1994(R2012) | TEXTILE TEST METHODS - TEXTILE FABRICS - DETERMINATION OF RESISTANCE TO SURFACE WETTING (SPRAY TEST) |
ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
CGSB 4.2-29.1 : M89(R1997) | TEXTILE TEST METHODS - COLOURFASTNESS TO DRY CLEANING SOLVENT |
AATCC TM 135 : 2015 | DIMENSIONAL CHANGES OF FABRICS AFTER HOME LAUNDERING |
CGSB 4.2-58 : 2004 | TEXTILE TEST METHODS - DIMENSIONAL CHANGE IN DOMESTIC LAUNDERING OF TEXTILES |
CGSB 4.2-26.3 : 2010 | TEXTILE TEST METHODS - TEXTILE FABRICS - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST |
ISEA 107 : 2015 | HIGH-VISIBILITY SAFETY APPAREL AND ACCESSORIES |
ASTM F 1506 : 2017-11 | PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS |
ISO 20471:2013 | High visibility clothing — Test methods and requirements |
ISO 811:1981 | Textile fabrics Determination of resistance to water penetration Hydrostatic pressure test |
CGSB 4.2-20 : M1989(R2013) | TEXTILE TEST METHODS - COLOURFASTNESS TO WATER |
AATCC TM8-2016e(2022)e | COLORFASTNESS TO CROCKING: CROCKMETER METHOD |
AATCC TM61:2013e2:2019 | COLORFASTNESS TO LAUNDERING: ACCELERATED |
AATCC TM 133 : 2013 | COLORFASTNESS TO HEAT: HOT PRESSING |
NFPA 2112 : 2018 | FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE |
CGSB 4.2-11.2 : M1989(R2013) | TEXTILE TEST METHODS - BURSTING STRENGTH - BALL BURST TEST |
ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
ISO 3175:1995 | Textiles Evaluation of stability to machine dry-cleaning |
AATCC TM 132 : 2013 | COLORFASTNESS TO DRYCLEANING |
CGSB 4.2-12.3 : 2005(R2013) | TEXTILE TEST METHODS - TEXTILES - TEAR PROPERTIES OF FABRICS - PART 1: DETERMINATION OF TEAR FORCE USING BALLISTIC PENDULUM METHOD (ELMENDORF) |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.