ISO 7724-1:1984
|
Paints and varnishes Colorimetry Part 1: Principles
|
ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method
|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance
|
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
|
EN 321:2001
|
Wood-based panels - Determination of moisture resistance under cyclic test conditions
|
ENV 12038:2002
|
Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes
|
EN ISO 1183-3 : 1999
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
|
EN ISO 9142:2003
|
Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
|
EN 310:1993
|
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
|
EN 322:1993
|
Wood-based panels - Determination of moisture content
|
EN ISO 4892-1:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
|
ISO 105-A03:1993
|
Textiles Tests for colour fastness Part A03: Grey scale for assessing staining
|
EN 84:1997
|
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
|
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
|
ENV 1156:1998
|
Wood-based panels - Determination of duration of load and creep factors
|
EN 317:1993
|
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
|
EN 13446:2002
|
Wood-based panels - Determination of withdrawal capacity of fasteners
|
ISO 7724-2:1984
|
Paints and varnishes Colorimetry Part 2: Colour measurement
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
EN ISO 75-1:2013
|
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
CEN/TS 15534-3:2007
|
Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
|
ISO 9142:2003
|
Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
|
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels
|
EN ISO 179-1:2010
|
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
|
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
EN 1383:2016
|
Timber structures - Test methods - Pull through resistance of timber fasteners
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
|
ISO 7724-3:1984
|
Paints and varnishes Colorimetry Part 3: Calculation of colour differences
|
EN ISO 9239-1:2010
|
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
|
ISO 16979:2003
|
Wood-based panels Determination of moisture content
|
EN 13893:2002
|
Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
|
ISO 472:2013
|
Plastics Vocabulary
|
ISO 899-2:2003
|
Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading
|
EN ISO 4628-6:2011
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
PREN 15458 : DRAFT 2014
|
PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE
|
ISO 1183-3:1999
|
Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method
|
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing
|
EN ISO 6603-2:2000
|
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
|
EN 318:2002
|
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
|
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
|
ISO 877:1994
|
Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
|
EN 20105-A03 : 1994
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART A03: GREY SCALE FOR ASSESSING STAINING
|
EN 117:2012
|
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
|
EN 12608:2003
|
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
|
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
ISO 4628-6:2011
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
|
CEN/TS 15534-2:2007
|
Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
EN ISO 877 : 1996
|
|
EN 1534:2010
|
Wood flooring - Determination of resistance to indentation - Test method
|
ISO 16869:2008
|
Plastics Assessment of the effectiveness of fungistatic compounds in plastics formulations
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
EN 927-6:2006
|
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
|
EN ISO 899-2:2003/A1:2015
|
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
EN ISO 4892-2:2013
|
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013)
|
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
|
CEN/TS 15083-2:2005
|
Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi
|
ISO 2813:2014
|
Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|
EN ISO 2813:2014
|
Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
|