|
ISO 15649:2001
|
Petroleum and natural gas industries — Piping
|
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
|
BS 8010-2.3:1988
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Asbestos cement
|
|
BS 8010-2.8:1992
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas
|
|
ISO 527-4:1997
|
Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
|
ISO 8504-1:2000
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles
|
|
ASTM G 8 : 1996
|
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
|
|
BS 8010-1:1989
|
Code of practice for pipelines Pipelines on land: general
|
|
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
|
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
|
|
BS 8010-3:1993
|
Code of practice for pipelines Pipelines subsea: design, construction and installation
|
|
ANSI/AWWA C200 : 2017
|
STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
|
|
ASTM D 543 : 2014 : REDLINE
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
|
|
ISO 15310:1999
|
Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method
|
|
ISO 8503-3:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure
|
|
AWWA C151/A21.51 : 2017
|
DUCTILE-IRON PIPE, CENTRIFUGALLY CAST
|
|
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
|
AWWA C150/A21.50 : 2014
|
THICKNESS DESIGN OF DUCTILE-IRON PIPE
|
|
ASTM D 5379/D5379M : 2012 : REDLINE
|
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
|
|
ISO 8501-3:2006
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
|
AWWA M11 : 2004
|
STEEL PIPE: A GUIDE FOR DESIGN AND INSTALLATION
|
|
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
|
|
ASTM C 581 : 2015 : REDLINE
|
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
|
|
ASTM D 696 : 2016 : REDLINE
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
|
|
BS 8010-2.1:1987
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Ductile iron
|
|
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
|
ISO 8501-2:1994
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
|
BS 8010-2.5:1989
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Glass reinforced thermosetting plastics
|
|
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
|
BS 8010-2.7:1989
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Precast concrete
|
|
ISO 10952:2014
|
Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Determination of the resistance to chemical attack for the inside of a section in a deflected condition
|
|
API 579-1 : 2016
|
FITNESS-FOR-SERVICE
|
|
ISO 75-3:2004
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
|
ISO 8504-2:2000
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
|
|
ISO 8503-4:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
|
|
ASTM D 2992 : 2012
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
|
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics
|
|
ISO 8504-3:1993
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning
|
|
EN 1465:2009
|
Adhesives - Determination of tensile lap-shear strength of bonded assemblies
|
|
ISO 8503-5:2017
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
|
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|
|
ISO 13623:2017
|
Petroleum and natural gas industries — Pipeline transportation systems
|
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
|
ISO 14129:1997
|
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
|
|
BS 8010-2.4:1988
|
Code of practice for pipelines. Pipelines on land: design, construction and installation Prestressed concreted pressure pipelines
|
