Foreword
Introduction
1 SCOPE
2 WARNING
3 RELATED DOCUMENTS
4 DEFINITIONS AND ABBREVIATIONS
5 AMENDMENT
6 SPONSORSHIP OF THE REQUIREMENT AND SECURITY
7 INTRODUCTION TO THE PROCESS FOR APPROVAL OF A CERTIFICATE
   OF SAFETY EXPLOSIVES
   7.1 Introduction to the Process
   7.4 The JSP 430 process (2nd stage)
   7.5 The Generic Naval Environment
   7.6 Magazine and Munition Protection Strategy
   7.7 Warships In Harbour
   7.8 Regulatory Documentation
SECTION 1 - PERFORMANCE REQUIREMENTS, ACOP AND GUIDANCE
8 PRINCIPLES FOR THE SAFE STOWAGE, PROTECTION AND HANDLING
   OF EXPLOSIVE MUNITIONS/STORES IN MOD SHIPS
   8.1 Description
   8.2 Performance Requirements - Basic Principles for the
         Safety, Protection and Handling of Magazines and
         Munitions in MoD Ships
   8.3 ACOP for Relationship of Explosive Safety to
         Vulnerability Reduction
   8.4 ACOP for Basic Principles of Capacity and Size
   8.5 ACOP for Basic Principles for the Safety and
         Protection of Magazines and Munitions
   8.6 ACOP for Ready Use Magazines
   8.7 ACOP for Small Quantity Top Up (SQTU) Magazines
   8.8 Guidance - Threat Hazard Assessment and developing
         Magazine and Munition Protection Strategies
   8.9 Guidance - Basic Principles for Environmental Hazards
   8.10 Guidance - Explosives Compatibility Groups
   8.11 Guidance - Bulk Explosives
   8.12 Guidance - RATTAM Protection Assessment
   8.13 Guidance - BR 862 and other Safety and Environmental
         Management Systems (SEMS)
9 DESIGNATED DANGER AREAS (DDA)
   9.1 Description
   9.2 Performance Requirements for DDAs
   9.3 ACOP for DDAs (General)
   9.4 ACOP for Electrical and Fire Fighting Requirements
         in DDAs
   9.5 ACOP for Package Examination Room (PER)
   9.6 ACOP for Marking of Areas around Launchers
   9.7 Guidance - DDAs (General)
   9.8 Guidance - DDAs (Electrical Installations and
         Fire Fighting Arrangements)
   9.9 Guidance - Package Examination Rooms (PERs)
   9.10 Guidance - Marking of Areas around Launchers
   9.11 Guidance - Separation of RAS(L) and RAS(A) Areas
10 ADJACENT COMPARTMENTS
   10.1 Description
   10.2 Performance Requirements for Adjacent Compartments
   10.3 ACOP for Reduction of Hazards from Adjacent Compartments
   10.4 ACOP for POL and Tanks Adjacent to a Magazine
   10.5 ACOP for Smoke/Heat Detectors in Adjacent Compartments
   10.6 Guidance - Adjacent Compartments (General)
   10.7 Guidance - Adjacent Compartments (POL Products)
   10.8 Guidance - Adjacent Compartments (Smoke/Heat Detectors)
11 GENERAL MAGAZINE CONSTRUCTION REQUIREMENTS
   11.1 Description
   11.2 Performance Requirements for General Magazine Construction
   11.3 ACOP for Structural Integrity of Magazines
   11.4 ACOP for Painting and Preservation in Magazines
   11.5 ACOP for Automatic Air Escapes (AAE)
   11.6 ACOP for Air Systems in Magazines
   11.7 ACOP for Drainage/Flooding Arrangements in Magazines
   11.8 ACOP for Access to Magazines
   11.9 ACOP for Cupboards and Drawers
   11.10 ACOP for Emergency Lighting
   11.11 ACOP for Magazine Hazard Warning/Safety Signs &
         Notices
   11.12 ACOP for Protection from Efflux
   11.13 ACOP for Pipework Systems in Magazines
   11.14 Guidance - Safety Assessment for the Construction of
         the Magazine/Munition Area
   11.15 Guidance - Painting and Preservation
   11.16 Guidance - AAEs
   11.17 Guidance - Air Systems in Magazines
   11.18 Guidance - Drainage for Magazines
   11.19 Guidance - Access to Magazines
   11.20 Guidance - Emergency Lighting for Magazines
   11.21 Guidance - Safety Signs and Notices
   11.22 Guidance - Protection from Rocket Motor Efflux
   11.23 Guidance - Pipework Systems in Magazines (Couplings)
12 MUNITION STOWAGES AND FITTINGS
   12.1 Description
   12.2 Performance Requirements for Munition Stowages and
         Fittings
   12.3 ACOP for General Munition Stowage Requirements
   12.4 ACOP for Clearance between Stowages and Adjacent Boundaries
   12.5 ACOP for Identification of Stowages and Stowage
         Capacity
   12.6 ACOP for permitted magazine contents
   12.7 Guidance - Optimised Stowage Principles to reduce
         consequences from initiation events
   12.8 Guidance - Safe and Secure Stowage
   12.9 Guidance - Clearances between Stowages and Adjacent
         Boundaries
   12.10 Guidance - Identification of Stowages and Stowage
         Capacity
   12.11 Guidance - Permitted Magazine Contents
13 MAGAZINE LOCKERS
   13.1 Description
   13.3 Performance Requirements for Magazine Locker Flooding
         Arrangements
   13.4 Performance Requirements for Siting and Installation
         of Magazine Lockers
   13.5 ACOP for Magazine Locker Design
   13.6 ACOP for Magazine Locker Flooding Arrangements
   13.7 ACOP for Siting and Installation of Magazine Lockers
   13.8 ACOP for Detonator Locker Requirements
   13.9 ACOP for Depth Charge Fuze RU Magazine Lockers
   13.10 ACOP for General Locker Notices and Notice Boards
   13.11 ACOP for Magazine Locker Contents
   13.12 Guidance - Safety of Magazine Lockers and Detonator
         Lockers
   13.13 Guidance - Flooding of Magazine Lockers
   13.14 Guidance - Detonator Lockers
   13.15 Guidance - Ready Use Magazines/Lockers
14 FIRE PREVENTION
   14.1 Description
   14.2 Performance Requirements for Fire Prevention
   14.3 ACOP for Fire Prevention Through Design
   14.4 ACOP for Fire Prevention Through the Explosives
         Safety Management System
   14.5 Guidance - Fire Prevention (General)
15 FIRE FIGHTING ARRANGEMENTS
   15.1 Description
   15.2 Performance Requirements for General Fire Fighting
         Arrangements
   15.3 ACOP for Common Principles of Fire Detection and
         Spray Control Systems
   15.4 ACOP for Fire Detection
   15.5 ACOP for Magazine Spray Systems (General)
   15.6 ACOP for Rapid Reaction Spray Systems (RRSS)
   15.7 ACOP for RRSS - Heat Activated Systems
   15.8 ACOP for RRSS - Smoke Activated Systems
   15.9 ACOP for RRSS - Local and Remote Operation
         Requirements
   15.10 ACOP for RRSS - Manual Intervention in Operation
   15.11 ACOP for Thermal Bulb activated Spray Systems
   15.12 ACOP for Manual Spray Systems
   15.13 ACOP for Pressurised Fresh Water Reservoirs
   15.14 ACOP for Seawater Supply Systems
   15.15 ACOP for Water Flow Sensors, Pressure Sensors
         and Associated Alarms
   15.16 ACOP for Provision of Drains in Spray System Pipework
   15.17 ACOP for Magazine Spray System Signs/Notices
   15.18 ACOP for First Aid Fire Fighting Equipment in Magazines
   15.19 ACOP for Fire Fighting Arrangements in Silo Magazines
   15.20 ACOP for Fire Fighting Arrangements in DDAs (including
         Vehicle Decks and Weapon Parks)
   15.21 ACOP for Fire Fighting Arrangements in Naval Armament
         Lighters
   15.22 Guidance - Magazine Fire Fighting Arrangements -
         General
   15.23 Guidance Design Requirements for Smoke and Heat
         Detection
   15.24 Guidance - Design Requirements for Spray Coverage
   15.25 Guidance - Requirements for Fresh Water Priming
   15.26 Guidance - Requirements for Free Air Space around
         stowages
   15.27 Guidance - Integration of Magazine Fire Alarm Systems
   15.28 Guidance - Munition Fire Characteristics
   15.29 Guidance - First Aid Fire Fighting Equipment for
         Magazines and DDAs
16 MAGAZINE AIR CONDITIONING/VENTILATION SYSTEMS
   16.1 Description
   16.2 Performance Requirements for Magazine Air
         Conditioning/Ventilation Systems
   16.3 ACOP for Environmental Requirements
   16.4 ACOP for Magazine Ventilation System Design and
         Installation
   16.5 ACOP for Magazine Ventilation Trunking
   16.6 ACOP for Magazine Ventilation Isolation Arrangements
   16.7 ACOP for Magazine Ventilation Valves - Local and
         Remote Operating Positions
   16.8 ACOP for Magazine Ventilation System Notices
   16.9 Guidance - Magazine Air Conditioning/Ventilation
         Systems
17 MITIGATION METHODS TO PREVENT INITIATION OR REDUCE
   CONSEQUENCES FROM MUNITION INITIATION EVENTS
   17.1 Description
   17.2 Performance Requirements for Explosives Mitigation
         Methods
   17.3 ACOP for Mitigation measures in Surface Ships
   17.4 ACOP for Mitigation for Fire
   17.5 ACOP for Mitigation for Fragment Attack
   17.6 ACOP for Mitigation for Bullet Attack
   17.7 ACOP for Mitigation for Blast Overpressure and
         Under Water Shock
   17.8 ACOP for Mitigation for Sympathetic Reaction
   17.9 ACOP for Mitigation for Rocket Efflux and
         Propulsive Reaction
   17.10 ACOP for Mitigation for Stowage of Shaped Charge
         Warheads including Demolition Munitions
   17.11 ACOP for Mitigation Tests or Assessments
   17.12 Guidance on Fundamental Principles of Mitigating
         Explosion Effects
   17.13 Guidance on Deriving Protection and Mitigation Methods
   17.14 Guidance - Explosives Mitigation Techniques
18 RATTAM PROTECTION
   18.1 Description
   18.2 Performance Requirement for RATTAM Protection
   18.3 ACOP for RATTAM Requirement
   18.4 ACOP for Methods of RATTAM Protection
   18.5 ACOP for Angle of RATTAM Attack
   18.6 ACOP for RATTAM Assessment
   18.7 Guidance - RATTAM Concept
19 MAGAZINE OVER PRESSURE RELIEF - VENTING PLATES
   19.1 Description
   19.2 Performance Requirement
   19.3 ACOP for Over Pressure Venting Plates and Vent Routes
   19.4 ACOP for Marking of Over Pressure Vent Plates
   19.5 Guidance - Over Pressure Vent Design Assessment
20 ANTI FLASH PROTECTION
   20.1 Description
   20.2 Performance Requirement
   20.3 ACOP for Anti Flash Protection
   20.4 ACOP for Anti Flash Protection in Weapon Lifts and
         Hoists
   20.5 Guidance - Anti Flash Protection
21 SECURITY AND ANTI SABOTAGE ARRANGEMENTS
   21.1 Description
   21.2 Performance Requirements for Security and Anti
         Sabotage
   21.3 ACOP for Security of Doors, Hatches, Manholes
         and Escape Scuttles
   21.4 ACOP for Prevention of Access
   21.5 ACOP for Security and Anti Sabotage Arrangements
   21.6 Guidance - Security and Anti Sabotage Arrangements
22 ANTI STATIC REQUIREMENTS AND CONDUCTING DECKS
   22.1 Description
   22.2 Performance Requirements for Anti Static Measures
         and Conducting Decks
   22.3 ACOP for Anti Static Measures and Conducting Decks
   22.4 Guidance - Anti Static Measures and Conducting Decks
23 AMMUNITION HANDLING - EMBARKING, STOWING AND SUPPLY
   23.1 Description
   23.2 Performance Requirements for Ammunition Handling
         Safety Policy
   23.3 Performance Requirements for Ammunition Handling -
         Novel Designs
   23.4 Performance Requirements for Ammunition Routes
   23.5 Performance Requirements for Explosives
         Handling/Lifting Equipment
   23.6 ACOP for Ammunition Handling
   23.7 ACOP for Ammunition Routes
   23.8 ACOP for Millers' Flaps
   23.9 ACOP for Handling/Lifting Equipment in Magazines
         and DDAs
   23.10 ACOP for Ammunition Route Drawings
   23.11 Guidance - Ammunition Handling Safety Assessment
   23.12 Guidance - Mechanical Handling Equipment in MOD Ships
24 PLATFORM DYNAMIC SAFETY HAZARD ASSESSMENT
   24.1 Description
   24.2 Performance Requirements for Platform Dynamic Safety
   24.3 ACOP for Safe Integration of OME Safety Cases into
         Platform Safety Cases
   24.4 ACOP for Weapon Installation Safe Firing Arcs
   24.5 Guidance for Safe Integration of OME Safety Cases
         into Platform Safety Cases
   24.6 Guidance on Weapon Installation Safe Firing Arcs
   24.7 Guidance - Platform Dynamic Safety for Combat Systems
   24.8 Guidance on Platform Dynamic Safety for Missile Systems
   24.9 Guidance on Platform Dynamic Safety for Torpedo Systems
SECTION 2 - REGULATIONS
25 GENERAL APPLICATION OF LEGISLATION
26 MOD DISAPPLICATION
27 MOD REGULATION
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - DEFINITIONS
ANNEX D - THREAT HAZARD ASSESSMENT
ANNEX E - SAMPLE S285K
ANNEX F - TYPICAL MAGAZINE CONTENTS BOARD
ANNEX G - GUIDANCE FOR FLASHTIGHT BARRIERS
ANNEX H - TYPICAL SHIP AMMUNITION ROUTE PROFILE