• There are no items in your cart

DEFSTAN 02-121(PT1)/2(2006) : 2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS
Available format(s)

Hardcopy , PDF

Superseded date

11-01-2010

Language(s)

English

Published date

01-01-2006

Foreword
1 Scope
2 Warning
3 Related Documents
4 General
5 Drawings
6 General Design Parameters
   6.1 Catering Complex
   6.2 Location
   6.3 Messing Systems
   6.4 Messing System 1 - HM Surface Ships with Complements
        up to 25
   6.5 Messing System 2 - HM Surface Ships with Complements
        26 to 100 and Nuclear Submarines
   6.6 Messing System 3 - HM Surface Ships with Complements
        101 and above
   6.7 Compartment Size and Working Area - HM Surface Ships
   6.8 Compartment Size and Working Areas - Submarines
   6.9 Headroom - HM Surface Ships
   6.10 Headroom - Submarines
   6.11 Food Lifts
   6.12 Minor Bulkheads
   6.13 Preservation
   6.14 Access
   6.15 Service Hatches
   6.16 Roller Shutters
   6.17 Decorative Grilles
   6.18 Security of Compartments
   6.19 Firefighting Arrangements
   6.20 Safety
   6.21 Hygiene and Cleanliness
   6.22 Equipment
   6.23 Lifting Arrangements and Removal Routes
   6.24 Benches
   6.25 Sinks
   6.26 Cupboards
   6.27 Drawers
   6.28 Messgear Stowages
   6.29 Crockery Stowages
   6.30 Waste Disposal Requirements - General
   6.31 Waste Disposal Requirements - Submarines
7 Environmental Conditions
   7.1 Introduction
   7.2 Shock
   7.3 Vibration
   7.4 Noise
   7.5 Temperature
8 Material
   8.1 Introduction
   8.2 Specifications
   8.3 Valves
   8.4 Pipework
   8.5 Quality Assurance
9 Services
   9.1 General
   9.2 Air Conditioning and Ventilation Arrangements
   9.3 Electrical Power Supplies
   9.4 Compartment and Local Lighting
   9.5 Fresh Water Systems
   9.6 Sea Water Systems
   9.7 Drainage
   9.8 Communication
10 Finish
   10.1 Decor
   10.2 Painting and Preservation
   10.3 Linings
   10.4 Insulation
   10.5 Deck Coverings
11 Information Plates
   11.1 Prohibition Plates
   11.2 Warning Plates
   11.3 Mandatory Plates
12 Installation of Equipment
   12.1 General
   12.2 Fastening
   12.3 Mountings
   12.4 Painting and Preservation
13 Inspections
   13.1 Introduction
   13.2 Installation Inspections
   13.3 General Test Requirements for Galley Equipments
Annex A
   A.1 Abbreviations and Definitions
Annex B
   B.1 Procurement Check List

Defines the Common Requirements for the provision, design, fitting out and inspection of galleys and associated spaces.

DevelopmentNote
Supersedes DEFSTAN 02-121(PT1)/1(2000) and DEFSTAN 07-205(PT1)/1(2000) (03/2006)
DocumentType
Standard
Pages
40
PublisherName
UK Ministry of Defence Standards
Status
Superseded
SupersededBy
Supersedes

DEFSTAN 02-121(PT2)/2(2006) : 2006 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS
DEFSTAN 02-130/1(2007) : 2007 REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS
DEFSTAN 02-728/3(2010) : 2010 REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS
DEFSTAN 02-121(PT4)/2(2006) : 2006 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 4: SPECIFIC REQUIREMENTS FOR NUCLEAR SUBMARINES

DEFSTAN 07-254(PT2)/1(2000) : 2000 DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 2: REDUCTION OF INTERNAL AIRBORNE NOISE
DEFSTAN 02-113/1(2005) : 2005 REQUIREMENT FOR MECHANICAL HANDLING
DEFSTAN 02-542(PT1)/1(2000) : 2000 GUIDE TO DESIGN AND USER REQUIREMENTS OF INTERNAL COMMUNICATIONS SYSTEMS - PART 1: HM SURFACE SHIPS CATEGORY 2
DEFSTAN 08-144/2(2001) : 2001 AMD 1 2003 MATERIAL REQUIREMENTS FOR THE NBC DEFENCE OF HM SURFACE SHIPS INCLUDING RFA - CATEGORY 1
DEFSTAN 07-251/1(2000) : 2000 REQUIREMENTS FOR THE PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS - CATEGORY 2
BS EN 631-1:1993 Materials and articles in contact with foodstuffs. Catering containers Specification for dimensions of containers
DEFSTAN 02-635/1(2000) : 2000 REQUIREMENTS FOR ELECTRIC MOTORS AND CONTROL GEAR ASSOCIATED WITH DOMESTIC WORKSHOPS AND SIMILAR MACHINERY CATEGORY 3
DEFSTAN 08-123/1(2000) : 2000 REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
DEFSTAN 02-764/1(2000) : 2000 FLAME METAL SPRAYING AND HOT DIP GALVANIZING OF SHIPS STRUCTURE AND FITTINGS
DEFSTAN 02-130(PT2)/1(2000) : 2000 REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS - PART 2: COMPOSITE BULKHEADS CATEGORY 2
DEFSTAN 08-160/1(2003) : 2003 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2
DEFSTAN 02-126(PT1)/2(2004) : 2004 REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 1: GENERAL REQUIREMENTS
DEFSTAN 00-35(PT5)/3(1999) : 1999 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 5: INDUCED MECHANICAL ENVIRONMENTS
DEFSTAN 59-41(PT3)/5(1995) : 1995 ELECTROMAGNETIC COMPATIBILITY - PART 3: TECHNICAL REQUIREMENTS TEST METHODS AND LIMITS
DEFSTAN 02-721(PT2)/1(2000) : 2000 GARBAGE DISPOSAL IN SURFACE SHIPS - PART 2: REQUIREMENTS FOR EQUIPMENT CATEGORY 2
DEFSTAN 02-791(PT2)/1(2000) : 2000 REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - PART 2: NOTCH TOUGH MILD STEEL-PLATE
DEFSTAN 07-226/3(2004) : 2004 REQUIREMENTS FOR ELECTRICAL TESTING OF EQUIPMENT
DEFSTAN 02-105(PT2)/2(2004) : 2004 REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - HM SURFACE SHIPS
DEFSTAN 02-723/1(2000) : 2000 REQUIREMENTS FOR MARKER PLATES
DEFSTAN 07-204(PT1)/1(2000) : 2000 THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 1: POLICY FOR SURFACE SHIPS
BS EN 10095:1999 Heat resisting steels and nickel alloys
DEFSTAN 02-728/2(2001) : INTERIM REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS
BS EN 485-4:1994 Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products
DEFSTAN 08-118(PT1)/1(2000) : 2000 DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER
BS EN 573-1:2004 Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system
DEFSTAN 02-127/1(2000) : 2000 ACCESS FITTINGS AND EQUIPMENT
DEFSTAN 02-130(PT1)/1(2000) : 2000 REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS - PART 1: DECORATIVE LININGS CATEGORY 2
BS EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
DEFSTAN 02-121(PT2)/2(2006) : 2006 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 2: SPECIFIC REQUIREMENTS FOR HM SURFACE SHIPS
DEFSTAN 02-121(PT4)/2(2006) : 2006 REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 4: SPECIFIC REQUIREMENTS FOR NUCLEAR SUBMARINES
DEFSTAN 07-232(PT2)/1(2000) : 2000 GUIDE TO DESIGN USE REQUIREMENTS OF INTERNAL COMMUNICATIONS SYSTEMS - CATEGORY 2 - PART 2: SUBMARINES
BS EN 573-2:1995 Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system
DEFSTAN 02-111/2(2001) : 2001 REQUIREMENTS FOR THE CONSTRUCTION, FITTING OUT AND TESTING OF REFRIGERATION SPACES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-722/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENTS OF DRAWINGS
DEFSTAN 02-587(PT1)/2(2001) : INTERIM REQUIREMENTS FOR LIGHTING SYSTEMS - PART 1: SURFACE SHIPS CATEGORY 3
DEFSTAN 02-720/2(2002) : 2002 WASTE DISPOSAL POLICY
DEFSTAN 02-791(PT1)/1(2000) : 2000 REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - PART 1: MILD STEEL - PLATE, SECTIONS AND BARS
DEFSTAN 02-120/2(2002) : INTERIM REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES
DEFSTAN 02-105(PT3)/2(2004) : 2004 REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - SUBMARINES
DEFSTAN 02-107/2(2002) : 2002 REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE WARSHIPS AND SUBMARINES - CATEGORY 2
DEFSTAN 02-703/1(2000) : 2000 THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY
BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
DEFSTAN 02-721(PT1)/1(2000) : 2000 GARBAGE DISPOSAL IN SURFACE SHIPS - PART 1: GENERAL REQUIREMENTS CATEGORY 2
DEFSTAN 02-862(PT1)/1(2000) : 2000 FASTENERS - PART 1: GENERAL
DEFSTAN 07-252/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION AND PAINTING OF SUBMARINES - CATEGORY 2
DEFSTAN 07-204(PT3)/1(2000) : 2000 THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 3: SURFACE SHIP AND SUBMARINE EQUIPMENT
DEFSTAN 02-126(PT2)/2(2004) : 2004 REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - HM SURFACE SHIPS
BS EN 573-3:2013 Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products
BS EN 485-3:2003 Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products
DEFSTAN 02-126(PT3)/2(2004) : 2004 REQUIREMENTS FOR STORES COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - HM SUBMARINES
BS 6431-1:1983 Ceramic floor and wall tiles Specification for classification and marking, including definitions and characteristics
DEFSTAN 02-791(PT3)/1(2000) : 2000 REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - PART 3: B QUALITY STEEL-PLATES AND SECTIONS
DEFSTAN 02-587(PT2)/1(2000) : 2000 REQUIREMENTS FOR LIGHTING SYSTEMS - PART 2: SUBMARINES CATEGORY 3
DEFSTAN 02-712/1(2000) : 2000 REQUIREMENTS FOR SEWAGE AND GREY - WATER SYSTEMS FOR SURFACE SHIPS (OBSOLESCENT) CATEGORY 2
DEFSTAN 02-791(PT4)/1(2000) : 2000 REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - PART 4: 'BX' QUALITY STEEL-PLATES
BS EN 515:2017 Aluminium and aluminium alloys. Wrought products. Temper designations
DEFSTAN 00-35(PT3)/3(1999) : 1999 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS
DEFSTAN 02-105(PT1)/2(2004) : 2004 REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 1: GENERAL REQUIREMENTS
BS EN 485-2:2013 Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties
DEFSTAN 08-103(PT2)/1(2000) : 2000 REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES
DEFSTAN 00-35(PT4)/3(1999) : 1999 AMD 1 2000 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS
BS EN 485-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 573-4:2004 Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products
BS EN 10259:1997 Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape
BS EN 10258:1997 Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape
DEFSTAN 02-139/1(2000) : 2000 CODE OF PRACTICE FOR SHIP HUSBANDRY (THIS STANDARD IS ONLY TO BE USED FOR SUBMARINES UNTIL ISSUE OF PART 2)
DEFSTAN 02-360/2(2001) : 2001 GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES
DEFSTAN 02-538/1(2000) : 2000 GUIDE TO THE SELECTION OF SMALL ELECTRICAL FITTINGS AND COMPONENTS CATEGORY 2
DEFSTAN 02-102(PT1)/3(2005) : 2005 REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES
DEFSTAN 08-159(PT2)/1(2001) : 2001 REQUIREMENTS FOR AIR-CONDITIONING AND VENTILATION - PART 2: HM SUBMARINES
DEFSTAN 02-149/1(2000) : 2000 ACCESS POLICY IN SURFACE SHIPS
DEFSTAN 02-302(PT1)/1(2000) : 2000 REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - PART 1: SURFACE SHIPS CATEGORY 2
DEFSTAN 00-35(PT1)/3(1999) : 1999 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT
DEFSTAN 02-122/1(2002) : INTERIM REQUIREMENTS FOR CATERING EQUIPMENT

View more information
US$57.50
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.