TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
Categories of NES
Related Documents
Health and Safety
Additional Information
CONTENTS
SECTION 1 - PERFORMANCE SPECIFICATION
            1.1 Constraints
                1.1.1 Demineralized Water
            1.2 Pre-Requisites for the Flushing, Cleaning
                and Inhibiting Process
                1.2.1 Sampling Points
                1.2.2 Temporary Flushing Rig
            1.3 The Flushing, Cleaning and Inhibiting Process
                1.3.1 High Velocity Flush
                1.3.2 Degrease/Biological Decontamination
                1.3.3 Inhibited Acid Clean
                1.3.4 Weak Acid Rinse
                1.3.5 Chemical Passivation
                1.3.6 Final Fill and Inhibition
            1.4 Witnessing and Acceptance
                1.4.1 Nominated Witness
                1.4.2 Acceptance Criteria
SECTION 2 - NATIONAL/INTERNATIONAL REGULATIONS
SECTION 3 - MILITARY STANDARDS/REQUIREMENTS
            3.1 Constraints
                3.1.1 Technical Advice
                3.1.2 Time-scales
                3.1.3 Operational Notice
                3.1.4 Working Hours
                3.1.5 Integration with Other Activities
                3.1.6 System Temperatures
                3.1.7 Water Quality
                3.1.8 Demineralized Water
            3.2 Pre-Requisites for the Flushing, Cleaning
                and Inhibiting Process
                3.2.1 Site Inspections
                3.2.2 Dockside Facilities and Services
                3.2.3 Two-way Radios
                3.2.4 System Features
                3.2.5 Draining and Venting Provisions
                3.2.6 Sampling Points
                3.2.7 Ship's Pumps
                3.2.8 Responsibilities
                3.2.9 Temporary Flushing Rig
                3.2.10 Connection of Temporary Flushing Rig
                       to System
                3.2.11 Flushing Velocities
                3.2.12 Disposal of Effluent
                3.2.13 Control of Substances Hazardous to
                       Health Risk Assessments
                3.2.14 Method Statement
            3.3 Site Preparation for the Flushing, Cleaning
                and Inhibiting Process
SECTION 4 - DESIGN REQUIREMENTS/GUIDANCE
SECTION 5 - CORPORATE EXPERIENCE & KNOWLEDGE
            5.1 Chilled Water Systems
                5.1.1 General
                5.1.2 System Contaminants
            5.2 Outline Procedure
                5.2.1 Chemicals
                5.2.2 Procedures
            5.3 Requirements of the Cleaning Contractor
                5.3.1 Qualifications
            5.4 The Flushing, Cleaning and Inhibiting Process
                5.4.1 High Velocity Flush
                5.4.2 Degrease/Biological Decontamination
                5.4.3 Inhibited Acid Clean
                5.4.4 Weak Acid Rinse
                5.4.5 Chemical Passivation
                5.4.6 Final Fill and Inhibition
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS AND DEFINITIONS
ANNEX C - PROCUREMENT CHECK LIST