• There are no items in your cart

DEFSTAN 02-718/1(2002) : 2002

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

REQUIREMENTS FOR SEWAGE PLANT AND ANCILLARY EQUIPMENT IN HM SURFACE SHIPS AND SUBMARINES
Withdrawn date

07-23-2013

Published date

01-12-2013

TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
Categories of Naval Defence Standard
Related Documents
Health and Safety
Additional Information
CONTENTS
SECTION 1. PERFORMANCE SPECIFICATION
           1.1 General Requirements
           1.2 Plant Loading
           1.3 Disinfection Equipment and Systems
           1.4 Discharge Performance
           1.5 Grey Waters
           1.6 Food Waste
           1.7 Reliability
SECTION 2. NATIONAL/INTERNATIONAL REGULATIONS
           2.1 Certification
           2.2 Safety
SECTION 3. MILITARY STANDARDS/REQUIREMENTS
           3.1 Environmental Conditions
           3.2 Drawing and Documentation
           3.3 Plants and Systems Designed by the
               Defence Procurement Agency
           3.4 Plants and Systems Designed for the
               Defence Procurement Agency
           3.5 Electrical Requirements
           3.6 Tanks
           3.7 Cleaning and Preservation
           3.8 Tests and Trials
           3.9 Sampling
           3.10 Lubrication
SECTION 4. DESIGN REQUIREMENTS/GUIDANCE
           4.1 Sewage Systems
           4.2 Sewage Plants and Tanks
           4.3 Discharge/Transfer Systems
           4.4 Installation at Ship
           4.5 Tanks General Requirements
           4.6 Filtration and Separation Arrangements
           4.7 Flushing Systems
           4.8 Vacuum Collection Systems
           4.9 Air Supplies
           4.10 Venting
           Figure 4.1 Weatherdeck Terminal for Vent Pipes
           4.11 Pumps
           4.12 Macerators
           4.13 Discharge Connection Points
           4.14 Drains
           Figure 4.2 Guards for Hangar and Vehicle Deck Drains
           4.15 Pipework
           4.16 Valves and Orifice Plates
           4.17 Material
           Table 4.1 List of Approved Materials
           4.18 Underwater Openings Protection against Sabotage
           4.19 Preservation of Strength and Watertight Integrity
           4.20 Safety
           4.21 Shipping and Securing
           4.22 Identification/Modification Labelling
           4.23 Alarms Warnings and Indications
           4.24 Controls
           4.25 Maintenance Requirements
SECTION 5. CORPORATE KNOWLEDGE & EXPERIENCE
           5.1 Foaming
           5.2 Vacuum Systems
           5.3 Pipework Tables
           Table 5.1 Allowable Fluid Speeds in
                      Pressure Discharge Pipes
           Table 5.2 Discharge Unit and Minimum Drain Sizes for
                      Single Appliance
           Table 5.3 Drains with a Declivity of Not Less than 1
                      in 30
           5.4 Collect Hold and Transfer Plant
ANNEX A. RELATED DOCUMENTS
ANNEX B. ABBREVIATIONS AND DEFINITIONS
ANNEX C. PROCUREMENT CHECK LIST
ALPHABETICAL INDEX

Defines the general requirements for the collection, treatment and disposal of sewage, grey water, food slurry, wash water and loose water from decks.

DevelopmentNote
Supersedes DEFSTAN 02-718(PT1)/1(2000), DEFSTAN 02-718(PT2)/1(2000), DEFSTAN 02-718(PT3)/1(2000), DEFSTAN 02-718(PT4)/1(2000), DEFSTAN 02-718(PT5)/1(2000), DEFSTAN 02-718(PT6)/1(2000) & DEFSTAN 02-718(PT7)/1(2000) (06/2003) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (07/2012)
DocumentType
Standard
PublisherName
UK Ministry of Defence Standards
Status
Withdrawn
Supersedes

DEFSTAN 02-106(PT1)/2(2010) : 2010 REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL & DENTAL FACILITIES

DEFSTAN 02-362/1(2000) : 2000 TYPE AND PRODUCTION TESTING OF MECHANICAL EQUIPMENT
DEFSTAN 02-853(PT1)/1(2000) : 2000 REQUIREMENTS FOR THE IDENTIFICATION, COLOUR CODING AND MARKING FOR SYSTEMS - PART 1: SURFACE SHIPS CATEGORY 2
DEFSTAN 02-720/1(2000) : 2000 WASTE DISPOSAL POLICY
DEFSTAN 02-155(PT1)/1(2000) : 2000 REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - PART 1: GENERAL REQUIREMENTS
DEFSTAN 07-251/1(2000) : 2000 REQUIREMENTS FOR THE PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS - CATEGORY 2
DEFSTAN 02-862(PT2)/1(2000) : 2000 FASTENERS - PART 2: FERROUS
BS 5391-1:1976 Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe Pipe for industrial uses
DEFSTAN 02-635/1(2000) : 2000 REQUIREMENTS FOR ELECTRIC MOTORS AND CONTROL GEAR ASSOCIATED WITH DOMESTIC WORKSHOPS AND SIMILAR MACHINERY CATEGORY 3
DEFSTAN 02-599/1(2000) : 2000 POLICY REQUIREMENTS AND DESIGN GUIDANCE FOR ALARM AND WARNING SYSTEMS CATEGORY N/A
DEFSTAN 08-123/1(2000) : 2000 REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2
DEFSTAN 02-32/1(2000) : 2000 REQUIREMENTS FOR ARRANGING AND CONDUCTING INSPECTIONS & TRIALS DURING THE CONSTRUCTION AND CONVERSION OF SURFACE SHIPS
DEFSTAN 07-226/2(2001) : 2001 REQUIREMENTS FOR ELECTRICAL TESTING OF EQUIPMENT - CATEGORY 2
BS 7372-1:1991 Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth General
DEFSTAN 02-327/2(2001) : INTERIM REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS
DEFSTAN 02-120/1(2000) : 2000 REQUIREMENTS FOR WCS, URINALS, BATHROOMS & WASHING FACILITIES
DEFSTAN 02-723/1(2000) : 2000 REQUIREMENTS FOR MARKER PLATES
DEFSTAN 02-862(PT3)(2000) : 2000 FASTENERS - PART 3: NON-FERROUS FASTENERS CATEGORY 2
BS 5392-1:1976 Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe Fittings for use with pipe for industrial uses
DEFSTAN 02-707(PT2)/1(2000) : 2000 SYMBOLS AND ABBREVIATIONS - PART 2: GUIDE TO ABBREVIATIONS AND SYSTEM CODE LETTERS
DEFSTAN 02-127/1(2000) : 2000 ACCESS FITTINGS AND EQUIPMENT
DEFSTAN 02-40(PT1)/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION OF TECHNICAL PUBLICATIONS - PART 1: SYSTEM AND EQUIPMENT PUBLICATIONS CATEGORY 2
BS 3399:1961 Specification for transformers for use in ships
BS 4346-1:1969 Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply
DEFSTAN 08-107/2(2001) : 2001 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROMECHANICAL AND NAVAL WEAPON EQUIPMENT - CATEGORY 2
DEFSTAN 02-719/1(2000) : 2000 SEA WATER SYSTEMS FOR HM SURFACE SHIPS CATEGORY 2
DEFSTAN 02-40(PT3)/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION OF TECHNICAL PUBLICATIONS - PART 3: ENGINEERING MANUALS CATEGORY 2
DEFSTAN 02-722/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENTS OF DRAWINGS
DEFSTAN 05-10/4(1990) : 1990 DRAWING PROCEDURE
BS EN 1514-1:1997 Flanges and their joints. Dimensions of gaskets for PN-designated flanges Non-metallic flat gaskets with or without inserts
DEFSTAN 02-853(PT2)/1(2000) : 2000 REQUIREMENTS FOR THE IDENTIFICATION, COLOUR CODING AND MARKING FOR SYSTEMS - PART 2: SUBMARINES CATEGORY 2
DEFSTAN 02-862(PT5)(2000) : 2000 FASTENERS - PART 5: NON-FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) CATEGORY 2
DEFSTAN 02-703/1(2000) : 2000 THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY
DEFSTAN 02-374/1(2000) : 2000 RUBBER FLEXIBLE PIPES AND BELLOWS FOR USE IN SUBMARINES CATEGORY 2
DEFSTAN 59-41(PT1)/4(1988) : 1988 ELECTROMAGNETIC COMPATIBILITY - PART 1: GENERAL REQUIREMENTS
DEFSTAN 02-862(PT1)/1(2000) : 2000 FASTENERS - PART 1: GENERAL
DEFSTAN 07-252/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION AND PAINTING OF SUBMARINES - CATEGORY 2
DEFSTAN 02-315/2(2002) : 2002 AIR COMPRESSORS CATEGORY 2
DEFSTAN 02-345/1(2000) : 2000 AMD 1 2002 REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 10 BAR
DEFSTAN 02-707(PT1)/1(2000) : 2000 SYMBOLS AND ABBREVIATIONS - PART 1: GUIDE TO THE GENERAL USE OF SYMBOLS
DEFSTAN 02-23/2(2001) : 2001 REQUIREMENTS FOR THE ORGANIZATION OF TESTS AND TRIALS DURING THE CONSTRUCTION AND CONVERSION OF SURFACE SHIPS
DEFSTAN 01-5/13(2002) : 2002 FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
DEFSTAN 02-360/1(2000) : 2000 LIST OF PREFERRED STANDARD VALVES (METRIC) (LOW PRESSURE)
DEFSTAN 02-40(PT4)/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION OF TECHNICAL PUBLICATIONS - PART 4: SHIP NBCD CLASS BOOKS AND SHIP STABILITY AND SURVIVABILITY BOOKS
DEFSTAN 07-244/1(2000) : 2000 REQUIREMENTS FOR AC AND DC MOTORS - CATEGORY 2
DEFSTAN 02-862(PT4)(2000) : 2000 FASTENERS - PART 4: FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) CATEGORY 2
DEFSTAN 02-40(PT2)/1(2000) : 2000 REQUIREMENTS FOR THE PREPARATION OF TECHNICAL PUBLICATIONS - PART 2: WEAPON EQUIPMENT INSTALLATION SPECIFICATIONS CATEGORY 2
DEFSTAN 00-35/2(1996) : 1996 AMD 1 1997 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL
DEFSTAN 02-502/1(2000) : 2000 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS CATEGORY 2

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.