DEFSTAN 59-411(PT1)/2(2014) : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
06-14-2019
English
01-01-2014
Foreword
Introduction
1 Scope
2 Warning
3 Normative References
4 Abbreviations and Definitions
5 Operational Scenario and the EM Environment
6 Specification of EMC Contractual Requirements
7 Control and Management of EMC
8 Management Roles and Responsibilities
9 EM Control Plan
10 EM Test Plan
11 EM Test Report
12 EM Test Certificate
13 Selection of Tests
14 Selection of Limits
15 Total System Trials Requirements
16 Post Design Services Requirements
17 In-Service Maintenance
18 Change of Role
19 Health and Safety
Annex A - Related Documents
Annex B - List of Definitions Applicable to this
Standard
Annex C - Applicability Of Tests By Equipment Type
Annex D - An Example of a Standard EMC Test Certificate
Annex E - Sea Service Whole Platform Electromagnetic
Engineering Management
Annex F - Compliance of MOD Material with the EMC
Directive (2004/108/EC) and the Defence
Directive (2009/81/EC)
Annex G - Risk Assessment for COTS/MOTS Procurement
Annex H - EMC And Functional Safety
Annex I - Example URD Electromagnetic Environment
Statement
Annex J - Default Defence Standard 59-411 Contractual
Requirements
Annex K - Points of Contact
Annex L - List of Abbreviations Applicable to this Part of
the Standard
Pertains to the limitation of propagated electromagnetic energy, whether conducted or radiated, and to the limitation of the susceptibility of electrical and electronic equipment, sub-systems and systems to such energy.
| DevelopmentNote |
Supersedes DEFSTAN 59-411(PT1)/1(2007). (04/2014)
|
| DocumentType |
Standard
|
| Pages |
116
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 00-133(PT0)/1(2014) : 2014 | AVIATION ARRANGEMENTS IN SURFACE SHIPS - PART 0: PROCEDURES FOR USE, DEFINITIONS AND CONTENT |
| DEFSTAN 00-133(PT0)/2(2015) : 2015 | AVIATION ARRANGEMENTS IN SURFACE SHIPS - PART 0: PROCEDURE FOR USE, DEFINITIONS AND CONTENT |
| DEFSTAN 23-009(PT0)/4(2016) : 2016 | GENERIC VEHICLE ARCHITECTURE (GVA) - PART 0: GVA APPROACH |
| IEC 61000-4-36:2014 | Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems |
| BS IEC 61000-4-36:2014 | Electromagnetic compatibility (EMC) Testing and measurement techniques. IEMI immunity test methods for equipment and systems |
| DEFSTAN 23-012/2(2017) : INTERIM | GENERIC SOLDIER ARCHITECTURE (GSA) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| BS EN 55022:2010 | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement |
| DEFSTAN 02-529(PT2)/1(2000) : 2000 | NUCLEAR HARDENING GUIDE - PART 2: ELECTRICAL INSTALLATION IN SURFACE SHIPS |
| DEFSTAN 08-108(PT1)/1(2000) : 2000 | NUCLEAR HARDENING GUIDE - CATEGORY 1 - PART 1: HARDENING AGAINST NUCLEAR EMP AND INR |
| BS 5260:1975 | Code of practice for radio interference suppression on marine installations |
| DEFSTAN 07-266(PT1)/2(2010) : 2010 | REQUIREMENTS FOR THE APPLICATION OF RADAR ABSORBENT MATERIAL (RAM) - PART 1: SUBMARINES |
| DEFSTAN 59-113/2(2012) : 2012 | LIGHTNING STRIKE PROTECTION REQUIREMENTS FOR SERVICE AIRCRAFT |
| AECTP-250 : 2014 | ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| DEFSTAN 61-5(PT6)/6(2009) : 2009 | NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS |
| AECP-2 : 2002 | NATO NAVAL RADIO AND RADAR RADIATION HAZARDS MANUAL |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| DEFSTAN 02-162(PT1)/1(2000) : 2000 | REQUIREMENTS FOR THE MANUFACTURER, TEST AND INSTALLATION OF GUARD STANCHIONS, RAILS AND ASSOCIATED SAFETY FITTINGS - PART 1: WEATHER DECKS CATEGORY 2 |
| DEFSTAN 01-5/17(2011) : 2011 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| DEFSTAN 61-5(PT4)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - QUALITY OF ELECTRICAL POWER SYSTEMS IN HM SHIPS |
| BS EN 61340-5-1:2016 | Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements |
| BS EN 55014-2:2015 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus Immunity. Product family standard |
| DEFSTAN 08-123/2(2012) : 2012 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
| BS EN 62305-2:2012 | Protection against lightning Risk management |
| BS EN 55012 : 2007 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS |
| BS EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Electrostatic discharge immunity test |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| CLC/TR 50426:2004 | Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide |
| SAE ARP 958 : 1999 | ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION METHOD |
| STANAG 1380 : 2011 | NATO NAVAL RADIO AND RADAR RADIATION HAZARD MANUAL - AECP-2(C) AND AECP-2(C) SUPPLEMENT |
| BS 613:1977 | Specification for components and filter units for electromagnetic interference suppression |
| STANAG 4235 : 0 | ELECTROSTATIC ENVIRONMENTAL CONDITIONS AFFECTING THE DESIGN OF MATERIEL FOR USE BY NATO FORCES |
| BS EN 61000-2-9:1996 | Electromagnetic compatibility (EMC). Environment Description of HEMP environment. Radiated disturbance. Basic EMC publication |
| DEFSTAN 08-134/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND PREPARATION OF AERIAL AND VISUAL SIGNALLING RIG AND RADHAZ DRAWINGS - CATEGORY 2 |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| BS 6299:1982 | Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components |
| IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| STANAG 4145 : 1991 | NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4 |
| CLC/TR 50538 : 2010 | Guide to EMC Directive conformity of equipment designed for military purposes |
| DEFSTAN 00-56(PT1)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
| DEFSTAN 61-5(PT2)SEC6/2(1992) : 1992 AMD 1 1994 | ELECTRICAL POWER SUPPLY SYSTEMS BELOW 650 VOLTS - PART 2: GROUND GENERATING SET CHARACTERISTICS - SECTION 6: AUDIO NOISE, METHODS OF MEASUREMENT |
| IEC TR 61000-2-1:1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
| IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
| DEFSTAN 21-50(PT1)/1(2000) : 2000 | REQUIREMENTS FOR WAVEGUIDE - PART 1: DESIGN CATEGORY 2 |
| IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| DEFSTAN 21-51/1(2000) : 2000 | REQUIREMENTS FOR THE INSTALLATION OF CORRUGATED COPPER AIR-SPACED RF CABLE CATEGORY 2 |
| BS EN 55016-1-4 : 2010 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017) |
| DEFSTAN 08-50/2(2010) : 2010 | INSTALLATION GUIDANCE FOR MEETING THE REQUIREMENTS OF NAVAL TEMPEST TESTING |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| DEFSTAN 21-53/1(2000) : 2000 | REQUIREMENTS FOR THE INSTALLATION OF CORRUGATED COPPER FOAM DIELECTRIC RF CABLE CATEGORY 2 |
| CISPR 17:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| BS EN 60801-2:1993 | Electromagnetic compatibility for industrial-process measurement and control equipment Electrostatic discharge requirements |
| BS 1597:1985 | Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations |
| CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
| STANAG 4234 : 0 | ELECTROMAGNETIC RADIATION (RADIO FREQUENCY) - 200 KHz TO 40 GHz ENVIRONMENT - AFFECTING THE DESIGN OF MATERIEL FOR USE BY NATO FORCES |
| DEFSTAN 05-61(PT1)/5(2010) : 2010 | QUALITY ASSURANCE PROCEDURAL REQUIREMENTS - PART 1: CONCESSIONS |
| DEFSTAN 68-69/1(1990) : 1990 | SILICONE COMPOUND ELECTRICAL INSULATING NATO CODE S - 736 JOINT SERVICE DESIGNATION XG - 250 |
| DEFSTAN 08-130/3(2012) : 2012 | VISUAL AND SOUND SIGNALLING EQUIPMENT (INCLUDING NAVIGATION LIGHTS, ETC.) |
| DEFSTAN 21-8/1(2000) : 2000 | SAFETY REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT CATEGORY 2 |
| DEFSTAN 21-50(PT2)/1(2000) : 2000 | REQUIREMENTS FOR WAVEGUIDE - PART 2: INSTALLATION REQUIREMENTS CATEGORY 2 |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| BS EN 55017:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| DEFSTAN 08-127(PT2)/3(2010) : 2010 | REQUIREMENTS FOR THE APPLICATION OF RADAR ABSORBENT MATERIAL (RAM) - PART 2: SURFACE SHIPS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.