Name: DIN 16963-11:1999-10
Brand: DIN

DIN 16963-11:1999-10

Withdrawn

PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS

Available format(s)

Hardcopy , PDF

Withdrawn date

01-01-2011

Language(s)

English

Published date

01-12-2013

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Masse, Bezeichnung
  3.1 Allgemeines
  3.2 Bundbuchsen
  3.3 Flansche (Pos. Nr. 11)
  3.4 Dichtringe
      3.4.1 Flachdichtring (Pos. Nr. 10)
      3.4.2 Runddichtring (Pos. Nr. 13)
4 Werkstoff
5 Ausführung
6 Kennzeichnung der Bundbuchsen
Anhang A (informativ) Literaturhinweise

This standard is included in DIN Handbook 52, 62-2 and 62 CD. Applies to bushes, flanges and seals for socket-welded flanged joints for connecting pipes for high density polyethylene (HDPE) Type 1 and Type 2 in accordance with DIN 8074 Part 1 or Part 2, and for connecting pipes and pipe elements of other material for pressure pipelines. The bushes and flanges of HDPE Types 1 and 2 must conform to the requirements of DIN 16963 Part 5 or Part 25.

DocumentType	Standard
Pages	8
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Withdrawn

DIN 8075 Beiblatt 1:1984-02	HIGH-DENSITY POLYETHYLENE (HDPE) PIPES - CHEMICAL RESISTANCE OF PIPES AND FITTINGS
DIN 16962-12:1999-10	PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS
DIN HDBK 62 CD : 7ED 2004	WASSERVERSORGUNG 2 - GUSS-, KUNSTSTOFF-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN
DIN 16963-15:1987-06	PIPE JOINT ASSEMBLIES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) PRESSURE PIPES - THREADED PIPE JOINTS - DIMENSIONS
DIN 16963-13:1980-08	PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE; TYPE 1 AND 2, TURNED AND PRESSED SOCKETS REDUCING FOR BUTT WELDING; DIMENSIONS
DIN 16963-10:1980-08	PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE); TYPE 1 AND 2, SOCKETS AND CAPS INJECTION MOULDED FOR SOCKET WELDING; DIMENSIONS
DIN HDBK 62-2 : 8ED 2010
DIN 16963-14:1983-06	PIPE JOINT AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE - TYPE 1 AND 2, SOCKET REDUCING AND UNIONS INJECTION MOULDED FOR SOCKET WELDING - DIMENSIONS

DIN EN 1561:2012-01	Founding - Grey cast irons; German version EN 1561:2011
DIN EN 681-1:2016-07 (Draft)	Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016
EN 681-1:1996/A3:2005	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
DIN 8063-4:1983-09	PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS
DIN 8063-5:1999-10	PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING
DIN EN 573-3:2013-12	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN 7728-1:1988-01	PLASTICS - SYMBOLS AND CODES FOR POLYMERS AND THEIR SPECIAL CHARACTERISTICS
DIN 8075:2011-12	POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING
DIN 28091-2:2014-11	TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 2: REQUIREMENTS AND TESTING FOR FIBRE-BASED GASKET MATERIALS (FA)
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
PREN 1092-1 : DRAFT 2016	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 60893-1 : 2004	INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
PREN 682 : DRAFT 1998	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
DIN 8074:2011-12	Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English
ISO 4065:1996	Thermoplastics pipes Universal wall thickness table
ISO 1043-1:2011	Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN 573-3:2013	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
DIN 28091-1:2014-11	TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS
DIN EN 1092-1:2016-05 (Draft)	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
EN 1561:2011	Founding - Grey cast irons
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels
EN 60893-1:2004	Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements