DIN 1986-4:2011-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-03-2019
English, German
01-01-2011
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Use of waste water pipes and fittings in new
construction work or replacement work
5 Areas of use of construction products and methods
for rehabilitation of drainage systems
6 Fire behaviour of construction products
7 Noise emissions from pipework
Bibliography
This standard is included in DIN Handbook 13-1 and 13-2.
DevelopmentNote |
Applies in conjunction with DIN EN 752 issue 04-2008 and DIN 1986-100 issue 05-2008. (12/2011)
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 19537-2:1988-01 | PIPES AND FITTINGS OF HIGH DENSITY POLYETHYLENE (PE-HD) FOR DRAINAGE AND SEWERAGE - TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN HDBK 15-4 : 6ED 2012 | |
DIN 4040-2:1989-03 | GREASE SEPARATORS - DIMENSIONING, INSTALLATION AND OPERATION |
DIN 4261-2:1984-06 | SMALL SEWAGE TREATMENT PLANTS; PLANTS WITH SEWAGE AERATION; APPLICATION, DESIGN, CONSTRUCTION AND TESTING |
DIN EN 12109:1999-06 | VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS |
DIN 1389-2:1979-10 | CONNECTORS FOR WATER CLOSETS - PRINCIPLES OF CONSTRUCTION AND TESTING |
VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
VDI 2050 Blatt 2:2011-11 | Requirements for mechanical equipment rooms - Sanitary engineering |
DIN HDBK 13-1 : 16ED 2018 | ABWASSERTECHNIK 1 - GEBAEUDE- UND GRUNDSTUECKSENTWAESSERUNG - ENTWAESSERUNGSGEGENSTAENDE |
DIN HDBK 13 : 14ED 2004 | WASTE WATER ENGINEERING 1. STANDARDS FOR SITE DRAINAGE |
DIN HDBK 141 : 4ED 2002 | STEEL PIPELINES 2 - STANDARDS FOR USE IN THE DESIGN AND CONSTRUCTION OF PIPEWORK |
DIN HDBK 13-2 : 11ED 2017 | ABWASSERTECHNIK 2 - ROHRE UND FORMSTUECKE FUER DIE GEBAEUDEENTWAESSERUNG |
DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
DIN 1999-1:1976-08 | SEPARATORS FOR LIGHT LIQUIDS, PETROL-SEPARATORS, FUEL OIL SEPARATORS - PRINCIPLES OF CONSTRUCTION |
DIN 1988-6:2002-05 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 6: FIRE FIGHTING AND FIRE PROTECTION INSTALLATIONS - DVGW CODE OF PRACTICE |
DIN 18531:1991-09 | WATER-PROOFING OF ROOFS - CONCEPTS, REQUIREMENTS, DESIGN PRINCIPLES |
DIN EN 14366:2005-02 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
DIN EN 12666-1:2011-11 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011) |
DIN EN 1455-1:1999-12 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system |
DIN EN 1401-1:2009-07 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
DIN EN 295-1:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
DIN 1986-3:2004-11 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 3: SPECIFICATIONS FOR SERVICE AND MAINTENANCE |
DIN 30670:2012-04 | Polyethylene coatings on steel pipes and fittings - Requirements and testing |
DIN EN 12056-4:2001-01 | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - PART 4: WASTEWATER LIFTING PLANTS - LAYOUT AND CALCULATION |
DIN 19534-3:2000-07 | PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) WITH RING SEAL SOCKET FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - PART 3: QUALITY CONTROL AND INSTALLATION |
DIN 19522:2010-12 | Cast iron drainage pipes and fittings without socket (SML) |
DIN EN 1566-1:1999-12 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system |
DIN EN 12056-6:1995-10 (Draft) | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - PART 6: INSPECTION AND TESTING |
DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
DIN EN 12056-2:2001-01 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000 |
DIN EN 1123-2:2007-12 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS |
DIN 19531-10:1999-12 | Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
DIN EN 1852-1:2016-05 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
DIN EN 1123-1:2004-12 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1123-1:1999 + A1:2004 |
DIN EN 612:2005-04 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
DIN EN 12050-3:2015-08 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
DIN EN 12056-1:2001-01 | Gravity drainage systems inside buildings - Part 1: General and performance requirements; German version EN 12056-1:2000 |
DIN EN 12050-2:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
DIN EN 1565-1:1999-12 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE COPOLYMER BLENDS (SAN + PVC) - PART 1: SPECIFICATION FOR PIPES, FITTINGS AND THE SYSTEM |
DIN EN 12056-3:2001-01 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; German version EN 12056-3:2000 |
DIN 19850-2:1996-11 | FIBRE CEMENT PIPES AND FITTINGS FOR SEWERS - PART 2: DIMENSIONS OF JOINT |
DIN 19535-10:2000-01 | HIGH-DENSITY POLYETHYLENE (PE-HD) PIPES AND FITTINGS FOR HOT-WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS (HT) INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS |
DIN EN 12763:2000-10 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
DIN EN 1451-1:2016-03 (Draft) | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
DIN EN 1124-1:2004-12 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004 |
DIN EN 15885:2016-01 (Draft) | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
DIN EN 13476-1:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
DIN EN 1124-2:2014-08 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: SYSTEM S, FORMS AND DIMENSIONS |
DIN EN 12056-5:2001-01 | GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - PART 5: INSTALLATION AND TESTING, INSTRUCTIONS FOR OPERATION, MAINTENANCE AND USER |
DIN EN 295-7:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
DIN EN 12200-1:2016-10 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
DIN 19850-1:1996-11 | FIBRE CEMENT PIPES AND FITTINGS FOR SEWERS - PART 1: DIMENSIONS OF PIPES, BRANCHES AND BENDS |
DIN EN 14758-1:2012-05 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
DIN EN 13476-2:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
DIN EN 14364:2013-05 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
DIN 19560-10:1999-03 | PIPES AND FITTINGS MADE OF POLYPROPYLENE (PP) FOR HOT WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS |
DIN EN 12050-1:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
DIN EN 752:2015-10 (Draft) | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
DIN EN 13476-3:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
DIN EN 1124-3:2009-02 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS |
DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
DIN EN 588-1:1996-11 | FIBRE-CEMENT PIPES FOR SEWERS AND DRAINS - PART 1: PIPES, JOINTS AND FITTINGS FOR GRAVITY SYSTEMS |
DIN EN 1329-1:2014-07 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
DIN EN 14636-1:2010-04 | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints; German version EN 14636-1:2009 |
DIN 19561-10:1999-12 | PIPES AND FITTINGS MADE OF STYRENE-COPOLYMERISATS FOR HOT WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS |
DIN EN 1519-1:2000-01 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.