• There are no items in your cart

DIN 202:1999-11

Current
Current

The latest, up-to-date edition.

SCREW THREADS - GENERAL PLAN
Available format(s)

Hardcopy , PDF

Language(s)

German, English

Published date

11-01-1999

Vorwort
Änderungen
Frühere Ausgaben
1 Anwendungsbereich
2 Normative Verweisungen
3 Bezeichnung
Anhang A (normativ) - Literaturhinweise

This standard is included in DIN Handbook 1, 1 E, 6-2, 45 and 193. Gives an overview of screw threads used either in general purpose or in special applications, threads that comply with the DIN and ISO Standards defined in this document.

DocumentType
Standard
Pages
8
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN EN ISO 1478:1999-12 Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
DIN 15403:1969-12 LIFTING HOOKS FOR HOISTS; KNUCKLE THREADS
DIN 6063-2:2011-04 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
LN 9163-11:1980-12 Aerospace; ISO Metric Threads; Survey, designation in manufacturing documents
DIN 8140-2:2005-08 WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS - PART 2: HELICAL COIL THREADS FOR INSERTS, THREAD TOLERANCES
DIN 7756:1979-02 VALVES FOR VEHICLE TYRES; VALVE SCREW THREADS; THEORETICAL VALUES, LIMITING DIMENSIONS OF SCREW THREADS
ISO 5855-1:1999 Aerospace MJ threads Part 1: General requirements
ISO 2903:2016 ISO metric trapezoidal screw threads Tolerances
ISO 68-2:1998 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
DIN 405-2:1997-11 GENERAL PURPOSE KNUCKLE THREADS - PART 2: DEVIATIONS AND TOLERANCES
DIN 513-1:1985-04 METRIC BUTTRESS THREADS; THREAD PROFILES
LN 9163-3:1980-12 Aerospace; ISO Metric Threads; Selection of threads and allowances for pipe and hose fittings
ISO 2904:1977 ISO metric trapezoidal screw threads — Basic dimensions
ISO 965-5:1998 ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
DIN EN 144-1:2016-07 (Draft) RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: THREAD CONNECTIONS FOR INSERT CONNECTOR
DIN 79012:2011-04 Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions
DIN 20314:1990-06 SCREW THREADS FOR DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORING IN MINING
DIN 20400:1990-01 Knuckle threads for the mining; threads with large load-bearing depth
DIN 40400:1981-12 EDISON THREAD FOR D-TYPE FUSES; LIMIT DIMENSIONS
LN 9163-7:1980-12 Aerospace; ISO Metric Threads; Selection of threads and allowances for structural parts
DIN 79011:1960-10 THREADS FOR CYCLES AND MOPEDS - SELECTION, APPLICATION
DIN EN 60061-1:2017-10 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS (IEC 60061-1:1969 + SUPPLEMENTS A:1970 TO V:1997 + A21:1998 TO A54:2016 + A55:2016, MODIFIED)
DIN 158-1:1997-06 METRIC EXTERNAL TAPER SCREW THREADS AND MATING INTERNAL PARALLEL SCREW THREADS - PART 1: NOMINAL SIZES, LIMIT DEVIATIONS, LIMITS OF SIZE AND VERIFICATION
DIN 55525:1988-11 PREFERRED THREADS FOR PLASTIC & GLASS CONTAINERS WITH UNIFIED SCREW CAP; BUTTRESS THREAD; DIMENSIONS
ISO 4570-3:1980 Tyre valve threads Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
DIN 103-7:1972-10 ISO METRIC TRAPEZOIDAL SCREW THREADS - LIMITING SIZES FOR BOLT THREADS FROM 8 TO 100 MM NOMINAL DIAMETER
ISO 6698:1989 Cycles — Screw threads used to assemble freewheels on bicycle hubs
DIN 7273-1:1970-07 KNUCKLE THREADS FOR STEEL SHEET PIECES UP TO 0.5 MM THICKNESS AND APPROPRIATED COUPLINGS; DIMENSIONS, TOLERANCES
ISO 965-2:1998 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
DIN ISO 228-1:1994-12 PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION
DIN 263-2:2000-03 SINGLE- AND DOUBLE-START ACME THREAD WITH CLEARANCE FOR RAIL VEHICLES - PART 2: THREAD LIMITS AND LIMIT DEVIATIONS
DIN ISO 6698:2015-03 CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLES HUBS (ISO 6698:1989)
DIN 513-2:1985-04 METRIC BUTTRESS THREADS; GENERAL PLAN
ISO 5835:1991 Implants for surgery Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread Dimensions
DIN 2999-1:1983-07 PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS
DIN 49301:1985-06 D-TYPE FUSES; WITHWORTH THREAD FOR SCREW-IN GAUGE RINGS D 2 AND D 3
DIN 20401-2:1984-05 BUTTRESS THREADS - 0,8 TO 2 MM PITCH - THREAD LIMITS
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ISO 5864:1993 ISO inch screw threads Allowances and tolerances
DIN 13-51:2013-10 ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 51: EXTERNAL SCREW THREADS FOR TRANSITION FITS (FORMER: SCREW THREADS FOR INTERFERENCE FIT) - TOLERANCES, LIMIT DEVIATIONS, LIMITS OF SIZES
DIN 2781:1990-09 MACHINE TOOLS - BUTTRESS THREAD 45 DEGREE, SINGLE START, FOR HYDRAULIC PRESSES
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
ISO 965-4:1998 ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
DIN 20401-1:1984-05 BUTTRESS THREADS - 0,8 TO 2 MM PITCH - NOMINAL DIMENSIONS
DIN 6602:1979-05 TANK WAGONS; THREADED CONNECTIONS
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
DIN 14-2:1987-02 ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - NOMINAL DIMENSIONS
DIN 13-2:1999-11 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 6630:1985-08 PACKAGING SCREW THREADS FOR SCREWING UP PROFILES; DESIGN PROFILES AND SIZES
ISO 2902:2016 ISO metric trapezoidal screw threads General plan
DIN ISO 965-1:2017-05 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
ISO 4570-2:1979 Tyre valve threads Part 2: Threads 9V1, 10V2, 12V1, 13V1
LN 9163-5:1980-12 Aerospace; ISO Metric Threads; Selection of threads and allowances for engines
ISO 8038:2013 Microscopes Screw threads for objectives and related nosepieces
DIN 103-8:1972-10 ISO METRIC TRAPEZOIDAL SCREW THREADS - LIMITING SCREW SIZES FOR BOLT THREADS FROM 105 TO 300 MM NOMINAL DIAMETER
DIN 58810:1984-03 SURGICAL IMPLANTS; THREADS FOR BONE SCREWS AND NUTS
LN 9163-4:1980-12 Aerospace; ISO Metric Threads; Selection of threads and allowances for operating elements
DIN 14-1:1987-02 ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - BASIC PROFILE
DIN EN 962:2000-11 TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS
ISO 725:2009 ISO inch screw threads Basic dimensions
DIN 6063-1:2011-04 Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
ISO 261:1998 ISO general purpose metric screw threads General plan
DIN EN 60399:2009-04 BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING
DIN 13-52:2016-10 (Draft) ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
DIN 405-1:1997-11 GENERAL PURPOSE KNUCKLE THREADS - PART 1: PROFILES, NOMINAL SIZES
DIN 14-4:1987-02 ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - LIMITS
DIN 7998:1975-02 THREADS AND THREAD ENDS FOR WOOD SCREWS
DIN 14-3:1987-02 ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - TOLERANCES
DIN 3182-1:1996-04 RESPIRATORY PROTECTIVE DEVICES AND DIVING APPARATUS - STANDARD THREAD - PART 1: THEORETIC PROFILE
ISO 2901:2016 ISO metric trapezoidal screw threads Basic and design profiles
ISO 965-3:1998 ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
ISO 1478:1999 Tapping screws thread
LN 9163-10:1965-05 Metric ISO-thread; conversion of previous manufacturing documents
DIN 263-1:2000-03 SINGLE- AND DOUBLE-START ACME THREAD WITH CLEARANCE FOR RAIL VEHICLES - PART 1: DIMENSIONS
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
DIN 30281:1981-07 THREADS FOR RAIL VEHICLES - SUMMARY
ISO 4570-1:1977 Tyre valve threads Part 1: Threads 5V1, 5V2, 6V1 and 8V1
DIN 103-6:1972-10
DIN 513-3 : 1985-04 METRIC BUTTRESS THREADS; DEVIATIONS AND TOLERANCES
ISO 3161:1999 Aerospace UNJ threads General requirements and limit dimensions
ISO 263:1973 ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in
DIN 58888:1979-07 THREAD CONNECTION FOR MICROSCOPE OBJECTIVES

View more information
US$57.99
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.