DIN EN 12602:2015-12 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
03-07-2021
German
01-01-2015
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Properties and requirements of materials
5 Properties and requirements of components
6 Assessment and verification of constancy of
performance - AVCP
7 Basis for design
8 Marking, labelling and designation
Annex A (normative) - Design by calculation
Annex B (normative) - Design by testing
Annex C (normative) - Resistance to fire design of
AAC components and structures
Annex CA (normative) - Modulus of elasticity
and maximum strain of AAC and reinforcing
steel at elevated temperature
Annex CB (informative) - Joints between AAC
components satisfying resistance to fire E
Annex CC (normative) - Temperature profiles of
AAC wall, floor and roof components and AAC
beams
Annex CD (normative) - Resistance to fire tabulated
data for walls with mechanical impact
Annex D (informative) - Recommended values
for partial safety factors
Annex E (informative) - Recommendations for
the consideration of prestress in the design of
prefabricated reinforced AAC components
Annex F (informative) - Statistical methods for
quality control
Annex G (normative) - Factory production control
of stainless reinforcing steel based on at
least three samples - Minimum acceptance
criteria for individual values and corresponding
mean values
Annex H (informative) - Methods for declaring the
mechanical and fire resistance performances in ENs
for structural elements
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No.305/2011
Bibliography
DevelopmentNote |
Partially supersedes DIN 4223-1 and DIN 4223-2. (08/2008)
|
DocumentType |
Draft
|
Pages |
383
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
EN 12602:2016 | Identical |
DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
EN 12269-1:2000 | Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN ISO 10140-5:2010/A1:2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
ISO 12491:1997 | Statistical methods for quality control of building materials and components |
ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
EN 680 : 2005 | DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
EN 15304:2010 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
EN 1739:2007 | Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 1740:1998 | Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
EN 678:1993 | Determination of the dry density of autoclaved aerated concrete |
EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
EN ISO 10140-1:2016 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
EN 14388:2015 | Road traffic noise reducing devices - Specifications |
EN 679:2005 | Determination of the compressive strength of autoclaved aerated concrete |
ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
EN 1991-1-2:2002/AC:2013 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
EN 1353 : 1996 | DETERMINATION OF MOISTURE CONTENT OF AUTOCLAVED AERATED CONCRETE |
EN ISO 10140-3:2010/A1:2015 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015) |
EN 772-20:2000/A1:2005 | METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 1742:1998 | Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 991:1995 | Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 1355:1996 | Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 1352:1996 | Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ISO 4356:1977 | Bases for the design of structures Deformations of buildings at the serviceability limit states |
EN 1356:1996 | Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
EN 990:2002 | Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure |
EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
EN 1351:1997 | Determination of flexural strength of autoclaved aerated concrete |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
EN 1996-1-2:2005/AC:2010 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 1741:1998 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
EN 1363-2:1999 | Fire resistance tests - Part 2: Alternative and additional procedures |
ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1737:1998 | Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
EN 1738:1998 | Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete |
EN 989:1995 | Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test |
EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
EN 1793-2:2012 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.