|
ISO 9229 : 2007(R2012)
|
THERMAL INSULATION - VOCABULARY |
|
EN 520 : 2004 + A1 2009
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
EN 12667 : 2001
|
THERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF GUARDED HOT PLATE AND HEAT FLOW METER METHODS - PRODUCTS OF HIGH AND MEDIUM THERMAL RESISTANCE |
|
EN 1607 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
|
ISO 354 : 2003(R2015)
|
ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
|
EN 1606 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSIVE CREEP |
|
ISO 12491 : 1997
|
STATISTICAL METHODS FOR QUALITY CONTROL OF BUILDING MATERIALS AND COMPONENTS |
|
EN 12939 : 2000
|
THERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF GUARDED HOT PLATE AND HEAT FLOW METER METHODS - THICK PRODUCTS OF HIGH AND MEDIUM THERMAL RESISTANCE |
|
EN 13501-1 : 2007 + A1 2009
|
FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
|
ISO 1716 : 2010
|
REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
|
EN ISO 9229 : 2007
|
THERMAL INSULATION - VOCABULARY |
|
EN 1605 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF DEFORMATION UNDER SPECIFIED COMPRESSIVE LOAD AND TEMPERATURE CONDITIONS |
|
ASTM D 3985 : 2005
|
TEST METHOD FOR OXYGEN GAS TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING USING A COULOMETRIC SENSOR |
|
ISO 4590 : 2016
|
RIGID CELLULAR PLASTICS - DETERMINATION OF THE VOLUME PERCENTAGE OF OPEN CELLS AND OF CLOSED CELLS |
|
ISO 11925-2 : 2010
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
|
EN ISO 1182 : 2010
|
REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
|
EN 823 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THICKNESS |
|
EN 312 : 2010
|
PARTICLEBOARDS - SPECIFICATIONS |
|
EN 13238 : 2010
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
|
ISO 1182 : 2010(R2015)
|
REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
|
EN 13823 : 2010 + A1 2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
|
EN 1602 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE APPARENT DENSITY |
|
ISO 11654 : 1997
|
ACOUSTICS - SOUND ABSORBERS FOR USE IN BUILDINGS - RATING OF SOUND ABSORPTION |
|
EN 1604 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF DIMENSIONAL STABILITY UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS |
|
EN ISO 354 : 2003
|
ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM |
|
EN 1609 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF SHORT TERM WATER ABSORPTION BY PARTIAL IMMERSION |
|
EN 826 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF COMPRESSION BEHAVIOUR |
|
EN ISO 1716 : 2010
|
REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
|
EN ISO 11654 : 1997
|
ACOUSTICS - SOUND ABSORBERS FOR USE IN BUILDINGS - RATING OF SOUND ABSORPTION |
|
EN ISO 11925-2 : 2010 COR 2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
|
EN 12086 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES |
|
EN 13172 : 2012
|
THERMAL INSULATING PRODUCTS - EVALUATION OF CONFORMITY |
|
EN 508-1 : 2014
|
ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
|
EN 14315-2 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |