• There are no items in your cart

DIN EN 14394 E : 2008

Current
Current

The latest, up-to-date edition.

HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Materials
6 Design
7 Tests
8 Performance requirements
9 Technical documentation
Annex A (normative) Cylindrical shells under internal
                       pressure
Annex B (normative) Spherical shells and dished heads
                       under internal and external pressure
Annex C (normative) Dished fire tube heads
Annex D (normative) Flat walls, stayings and girder stays
Annex E (normative) Cylindrical shells under external
                       pressure
Annex F (informative) Pressure Equipment Directive 97/23/EC
Annex ZA (informative) Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 92/42/EEC of 21 May
                       1992 on efficiency requirements for
                       new hot-water boilers fired with
                       liquid or gaseous fuels
Annex ZB (informative) Relationship between this European Standard
                       and the Essential Requirements of EU
                       Directive 97/23/EC concerning pressure
                       equipment (PED)
Bibliography
National Annex NA (informative) Bibliography

Describes the requirements and test methods for the design, manufacturing, safe operation and the rational energy usage for standard boilers and low temperature boilers (with "boiler" in the sense of "boiler body") from steel and cast iron to be equipped with separately marketed forced draught burners according to the relevant burner standards (for automatic forced draught burners for gaseous fuels see EN 676 and for atomising oil burners see EN 267) up to a nominal heat output of 10 MW.

DocumentType
Standard
Pages
133
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
EN 12953-12:2003 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
ISO 15610:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
EN 12953-1:2012 Shell boilers - Part 1: General
EN 12953-7:2002 Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
EN ISO 15611:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
EN 303-3:1998/AC:2006 HEATING BOILERS - PART 3: GAS-FIRED CENTRAL HEATING BOILERS ASSEMBLY COMPRISING A BOILER BODY AND A FORCED DRAUGHT BURNER
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
ISO 15611:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
EN 12953-3:2016 Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-11:2003 Shell boilers - Part 11: Acceptance tests
EN 10021:2006 General technical delivery conditions for steel products
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
ISO 857-1:1998 Welding and allied processes Vocabulary Part 1: Metal welding processes
EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10204:2004 Metallic products - Types of inspection documents
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
EN 303-7:2006 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
ISO 185:2005 Grey cast irons Classification
EN 12953-10:2003 Shell boilers - Part 10 : Requirements for feedwater and boiler water quality
EN 12953-8:2001/AC:2002 SHELL BOILERS - PART 8: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
DIN EN 14610:2005-02 WELDING AND ALLIED PROCESSES - DEFINITIONS OF METAL WELDING PROCESSES
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 1561:2011 Founding - Grey cast irons
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
US$268.73
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.