DIN EN 14868:2005-11
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Types of corrosion
6 Role of oxygen
7 Microbial corrosion
8 Corrosion damage in Case I conditions
9 Corrosion damages in Case II systems
10 Corrosion protection methods
Annex A (informative) Important corrosion reactions
in the systems under consideration
Bibliography
This standard is included in DIN Handbook 219. Gives a review of influencing factors on the corrosion likelihood of metallic components (pipes, tanks, vessels, heat exchangers, pumps etc.) in water circulation systems in buildings.
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
BS EN 14868:2005 | Identical |
EN 14868 : 2005 | Identical |
NS EN 14868 : 1ED 2005 | Identical |
UNE-EN 14868:2006 | Identical |
NEN EN 14868 : 2005 | Identical |
NF EN 14868 : 2005 | Identical |
UNI EN 14868 : 2005 | Identical |
NBN EN 14868 : 2005 | Identical |
I.S. EN 14868:2005 | Identical |
DIN HDBK 219 : 5ED 2015 | KORROSION UND KORROSIONSSCHUTZ - BEURTEILUNG, PRUEFUNG, SCHUTZMASSNAHMEN |
VDI 2036:2009-11 | Building installations for discrict heating |
VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
EN ISO 15875-2:2003/A1:2007 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES |
EN 1254-4:1998/AC:1999 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
EN 12502-1 : 2004 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL |
EN ISO 15877-2:2009/A1:2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN ISO 15877-3:2009/A1:2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
EN 12502-4 : 2004 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS |
EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
EN 12502-3 : 2004 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT DIP GALVANISED FERROUS MATERIALS |
EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system |
EN 10312:2002/A1:2005 | WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
EN ISO 15877-1:2009/A1:2010 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010) |
EN ISO 15877-5:2009/A1:2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes |
ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9454-1:2016 | Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging |
EN 12502-5 : 2004 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW ALLOYED STEELS |
EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General |
ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
EN 12502-2 : 2004 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS |
ISO 15877-5:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system |
EN ISO 15875-1:2003/A1:2007 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007) |
EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
EN ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
EN 29454-1:1993 | Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990) |
ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
EN 10224:2002/A1:2005 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
EN ISO 6509 : 1995 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS |
ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.