• There are no items in your cart

DIN EN 14886 E : 2008

Current
Current

The latest, up-to-date edition.

PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
  4.1 General hazards on bandknife cutting machines
      4.1.1 General
      4.1.2 Mechanical hazards
      4.1.3 Electrical hazards
      4.1.4 Hazards due to failure of the control system
      4.1.5 Hazards generated by noise
      4.1.6 Fire hazard generated by flying sparks while grinding
             the bandknife
      4.1.7 Hazard due to inhalation of harmful dusts created by
             cutting
  4.2 Additional hazards or general hazards which require particular
      protective measures on manual bandknife cutting machines
      4.2.1 Vertical bandknife cutting machines
      4.2.2 Tilting bandknife cutting machines
  4.3 Additional hazards or general hazards which require particular
      protective measures on automatic bandknife cutting machines
      4.3.1 Bandknife cutting machines with turntable (carousel)
      4.3.2 Vertical bandknife cutting machines with fixed table
             and movable cutting unit
      4.3.3 Horizontal bandknife cutting machines
      4.3.4 Horizontal bandknife cutting machines for block trimming
      4.3.5 Vertical bandknife cutting machines for block trimming
      4.3.6 Contour cutting machines
      4.3.7 Profile cutting and splitting machines
      4.3.8 Compression cutting machines
      4.3.9 Peeling machines
      4.3.10 Cross-cutting machines
5 Safety requirements and/or protective measures
  5.1 General requirements and/or measures for bandknife cutting
      machines
      5.1.1 General
      5.1.2 Mechanical hazards
      5.1.3 Electrical hazards
      5.1.4 Hazards due to failure of the control system
      5.1.5 Hazards generated by noise
      5.1.6 Fire hazard generated by flying sparks while grinding
             the bandknife
      5.1.7 Hazard due to inhalation of harmful dusts created by
             cutting
  5.2 Additional requirements and/or measures for manual bandknife
      cutting machines
      5.2.1 Vertical bandknife cutting machines
      5.2.2 Tilting bandknife cutting machines
  5.3 Additional requirements and/or measures for automatic
      bandknife cutting machines
      5.3.1 Bandknife cutting machines with turntable (carousel)
      5.3.2 Vertical bandknife cutting machines with fixed table
             and movable cutting unit
      5.3.3 Horizontal bandknife cutting machines
      5.3.4 Horizontal bandknife cutting machines for block trimming
      5.3.5 Vertical bandknife cutting machines for block trimming
      5.3.6 Contour cutting machines
      5.3.7 Profile cutting and splitting machines
      5.3.8 Compression cutting machines
      5.3.9 Peeling machines
      5.3.10 Cross-cutting machines
6 Verification of safety requirements and/or protective measures
7 Information for use
  7.1 Instruction handbook
      7.1.1 General
      7.1.2 General information for all bandknife cutting machines
      7.1.3 Additional information for particular bandknife cutting
             machines
  7.2 Marking
Annex A (normative) Noise test code
      A.1 Introduction
      A.2 Determination of the A-weighted emission sound pressure
          level at the operator's position
      A.3 Determination of the A-weighted sound power level
      A.4 Installation and mounting conditions for noise measurement
      A.5 Operating conditions
      A.6 Measurement uncertainty
      A.7 Information to be recorded and reported
          A.7.1 Information to be recorded
          A.7.2 Information to be reported
      A.8 Declaration and verification of noise emission values
Annex B (normative) Prohibition sign: "No access"
Annex ZA (informative) Relationship between this European Standard
                       and the Essential Requirements of EU Directive
                       98/37/EC
Annex ZB (informative) Relationship between this European Standard
                       and the Essential Requirements of EU Directive
                       2006/42/EC
Bibliography

Applicable to machines that are designed specifically to cut, split or peel block foams to commercially required shapes, using a single or double cut.

DocumentType
Standard
Pages
83
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
NF EN 14886 : 2008 Identical
NEN EN 14886 : 2008 Identical
EN 14886:2008 Identical
UNI EN 14886 : 2008 Identical
I.S. EN 14886:2008 Identical
BS EN 14886:2008 Identical

EN 13236:2010+A1:2015 Safety requirements for superabrasive products
EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$203.57
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.