• There are no items in your cart

DIN EN 15094 E : 2009

Current
Current

The latest, up-to-date edition.

SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety Requirements and/or measures
  5.1 General requirements for design, planning and risk
      assessment
      5.1.1 Planning of cold flat rolling mills
      5.1.2 Structural assembly
      5.1.3 Safety layout
      5.1.4 Access to operating points
      5.1.5 Access to danger zones
      5.1.6 Guards
      5.1.7 Guard-rails
      5.1.8 Safety signs and warning devices
      5.1.9 Safe guarding
      5.1.10 Personal protective equipment
      5.1.11 Electrical equipment
      5.1.12 Hydraulic, pneumatic, cooling and lubrication systems
      5.1.13 Fluid systems
      5.1.14 Material to be discharged to drains
      5.1.15 Surface temperatures and heat radiation
      5.1.16 Pulpits and control stands
      5.1.17 Software manipulation
      5.1.18 Fire protection
      5.1.19 Ergonomic principles
      5.1.20 Vibrations
      5.1.21 Loss of energy
      5.1.22 Linked Equipment
  5.2 List of significant hazards, hazardous situations, safety
      requirements and/or measures
      5.2.1 General
      5.2.2 Hydraulics, pneumatics, emulsions and other
             pressurised fluid systems
      5.2.3 Bridges over roller tables and material guides
      5.2.4 Handling, guiding and transfer equipment (general)
      5.2.5 Roller tables and conveyors
      5.2.6 Rolling mills, rolling mill stands
      5.2.7 Pulpits and control stands
      5.2.8 Measuring devices and display units
      5.2.9 Cutting devices
      5.2.10 Coiling/de-coiling equipment
      5.2.11 Coil banding machines and marking machines
  5.3 Additional safety requirements or measures
      5.3.1 Hold-to-run control device
      5.3.2 Mechanical restraint devices
      5.3.3 Accessible rotating/moving parts
      5.3.4 Particular ergonomic requirements
  5.4 Noise reduction as a safety requirement
      5.4.1 Noise reduction at source by design
      5.4.2 Noise reduction by protective measures
      5.4.3 Noise reduction by information
      5.4.4 Noise sources and examples of noise reduction measures
6 Verification of the safety requirements and/or measures
7 Information for use
  7.1 General
  7.2 Warning devices and safety signs
  7.3 Minimum marking
  7.4 Accompanying documents
      7.4.1 Instruction handbook
      7.4.2 Machine/equipment declaration
      7.4.3 Detailed information/instructions
  7.5 Maintenance manual
Annex A (normative) Safety requirements and/or measures for
        electrical equipment and control systems at cold rolling
        mills
      A.1 General
      A.2 Special requirements for controls
      A.3 Special requirements for shut-down equipment
           A.3.1 Stop functions/emergency stop functions
           A.3.2 Selection of stop functions
           A.3.3 Emergency stop areas
           A.3.4 Stop functions
Annex B (normative) Noise test code
      B.1 Introduction
      B.2 Determination of A-weighted sound power level
      B.3 Determination of A-weighted emission sound pressure
           levels
           B.3.1 Determination of the emission sound pressure level
                 at specified measuring points
           B.3.2 Determination of emission sound pressure level at
                 work stations
      B.4 Measurement uncertainty
      B.5 Operating conditions
      B.6 Information to be recorded and reported
      B.7 Declaration and verification of noise emission values
Annex C (normative) Protection of persons in case of using
        asphyxiant gases in fire fighting systems
      C.1 General
      C.2 Warning devices
      C.3 Restraint devices
      C.4 Preliminary warning time
      C.5 Interrupt device for extinguishing gas
      C.6 Blocking devices
      C.7 Pipes
      C.8 Rooms and adjacent areas
      C.9 Escape routes
      C.10 Doors
      C.11 Marking
      C.12 Instruction handbook
Annex D (informative) Example for manufacturer's safety
        instructions for maintenance at cold flat rolling mills
      D.1 Precautions to reduce hazards caused by
           D.1.1 Lack of instructions
           D.1.2 Visual or audible checks at machinery in motion
           D.1.3 Unintentional movements during maintenance
           D.1.4 Work during standstill with safeguards disabled
           D.1.5 Work with hazardous substances
           D.1.6 Plant re-start
Annex E (informative) Machines and/or equipment covered by this
        standard
      E.1 Machines and/or equipment covered by this standard but
           are not limited to
           E.1.1 Plants
           E.1.2 Equipment
Annex F (informative) Roll spalling
      F.1 Hazard
      F.2 Causes
      F.3 Safety measures
Annex G (informative) Example for the risk analysis due to
        interfaces
Annex ZA (informative) Relationship between this European Standard
         and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard
         and the Essential Requirements of EU Directive 2006/42/EC
Bibliography

Defines the safety requirements for cold rolling mills for flat products (coiled or as heavy plates).

DocumentType
Standard
Pages
65
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
EN 15094:2008 Identical

ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 12254:2010/AC:2011 SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 60825-4:2006/A2:2011 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
EN 14253:2003+A1:2007 Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
DIN VDE 0833-1 : 2014-10 ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD-UP - PART 1: GENERAL REQUIREMENTS
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
ISO 6183:2009 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 12094-1:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV Safety of laser products - Part 4: Laser guards
EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN ISO 11820 : 1996 ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 15004-1:2008 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified)
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
ISO 11820:1996 Acoustics — Measurements on silencers in situ
EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 1063:1999 Glass in building - Security glazing - Testing and classification of resistance against bullet attack
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
ISO 14520-1:2015 Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 50171 : 2001 COR 2001 CENTRAL POWER SUPPLY SYSTEMS
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN ISO 11064-1:2000 Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000)
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
EN ISO 11821 : 1997 ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
ISO 11691:1995 Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
ISO 11821:1997 Acoustics — Measurement of the in situ sound attenuation of a removable screen
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$176.32
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.