ISO 13934-1:2013
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
EN ISO 1421:2016
|
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)
|
EN ISO 13937-2 : 2000
|
TEXTILES - TEAR PROPERTIES OF FABRICS - PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-2:2000)
|
EN ISO 13934-1:2013
|
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
|
EN ISO 14116:2015
|
Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015)
|
ISO 13688:2013
|
Protective clothing — General requirements
|
ISO 6942:2002
|
Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
|
EN ISO 13938-2 : 1999
|
TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 2: PNEUMATIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION
|
ISO 13935-2:2014
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
ISO 13938-2:1999
|
Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
EN ISO 20471:2013/A1:2016
|
HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013/AMD 1:2016)
|
EN ISO 4920:2012
|
Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012)
|
ISO 14116:2015
|
Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing
|
EN ISO 12947-2:2016
|
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016)
|
EN ISO 5077:2008
|
Textiles - Determination of dimensional change in washing and drying (ISO 5077:2007)
|
EN ISO 12127-1:2015
|
Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)
|
ISO 15025:2016
|
Protective clothing Protection against flame Method of test for limited flame spread
|
EN ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016)
|
EN ISO 13935-2:2014
|
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
|
ISO 17493:2016
|
Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven
|
ISO 12127-1:2015
|
Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder
|
ISO 16604:2004
|
Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage
|
EN ISO 13938-1 : 1999
|
TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 1: HYDRAULIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION
|
ISO 20471:2013
|
High visibility clothing — Test methods and requirements
|
ISO 11092:2014
|
Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
|
EN ISO 15025:2016
|
Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016)
|
EN ISO 11092:2014
|
Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014)
|
EN ISO 13688:2013
|
Protective clothing - General requirements (ISO 13688:2013)
|
ISO 1421:2016
|
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
|
ISO 4920:2012
|
Textile fabrics — Determination of resistance to surface wetting (spray test)
|
ISO 12947-2:2016
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
ISO 13938-1:1999
|
Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
EN 1149-5:2008
|
Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
|
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
|
EN ISO 6942:2002
|
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002)
|