DIN EN 26:2015-08
Current
The latest, up-to-date edition.
Hardcopy , PDF
German, English
01-01-2015
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of water heaters
5 Constructional requirements
6 Operational requirements
7 Rational use of energy
8 Fitness for purpose
9 Marking and instructions
10 Ecodesign Data
11 Energy Labelling Data
Annex A (informative) - National situations
Annex B (normative) - Test apparatus for type
C[1], C[3], B[4] and B[5] water heaters
Annex C (normative) - Test apparatus for type
C[21] appliances
Annex D (normative) - Description of the sealed
room for the tests of type A[AS] appliances
Annex E (informative) - Soundness of the gas
circuit test - Volumetric method
Annex F (informative) - Principal symbols and
abbreviations used
Annex G (informative) - Guidelines for extension
to other categories
Annex H (informative) - A deviations
Annex I (normative) - Lists of materials currently
used
Annex J (normative) - Test methods to determine
the effects of to long-term thermal load,
long-term condensate exposure, condensing/
non-condensing cycling and resistance to
UV radiation
Annex K (informative) - NOx conversion calculation
Annex L (normative) - Parts in copper or copper alloys
Annex M (informative) - Compilation of the test conditions
for the various gas families
Annex N (informative) - Alternative Method for the
determination of the nominal heat input or the
maximum and minimum heat input (according
to 6.3.1) for appliances using a pneumatic gas/air
ratio control system
Annex ZA (informative) - Relationship between this
European Standard and the requirements of
EU Directive 2009/142/EC
Annex ZB (informative) - Relationship between this
European Standard and the requirements of
Commission Regulation (EU) No 814/2013
Annex ZC (informative) - Relationship between this
European Standard and the requirements of
Commission Delegated Regulation (EU) No 812/2013
Bibliography
Specifies the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called 'water heaters'.
DevelopmentNote |
DRAFT AMD 1 issued in February 2017. (02/2017)
|
DocumentType |
Standard
|
Pages |
170
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
NEN EN 26 : 2015 | Identical |
I.S. EN 26:2015 | Identical |
EN 26:2015 | Identical |
NBN EN 26 : 2015 | Identical |
UNI EN 26 : 2007 | Identical |
NS EN 26 : 1997 | Identical |
UNE-EN 26:2016 | Identical |
SN EN 26:2015 | Identical |
BS EN 26:1998 | Identical |
NF EN 26 : 2015 | Identical |
DIN 3368-4:1982-09 | GAS-APPLIANCES - COMPLETING DETERMINATIONS FOR APPLIANCES FOR INSTANTANEOUS WATER HEATERS WITH AUTOMATIC ADAPTION OF EFFICIENCY |
BGR 146 : 2003 | FLUESSIGGASANLAGEN ZU HAUSHALTSZWECKEN AUF WASSERFAHRZEUGEN IN DER BINNENSCHIFFAHRT |
VDE 0700-450 : 2001 | ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN 13203-1:2015 | Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries |
EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 126:2012 | Multifunctional controls for gas burning appliances |
EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
ISO 6914:2013 | Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
EN 14471:2013+A1:2015 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
CR 1472:1997 | General guidance for the marking of gas appliances |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 1443:2003 | Chimneys - General requirements |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
ISO 301:2006 | Zinc alloy ingots intended for castings |
EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
EN 15036-1:2006 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.