|
DIN EN 60999 : 1994
|
CONNECTING DEVICES - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS
|
|
VDE 0875-15-1 : 2016-04
|
LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT (CISPR 15:2013 + IS1:2013 + IS2:2013 + A1:2015)
|
|
DIN EN 55015 : 2016
|
LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT (CISPR 15:2013 + IS1:2013 + IS2:2013 + A1:2015)
|
|
VDE 0283-1 : 2010
|
LEITUNGEN FUER LEUCHTROEHRENGERAETE UND LEUCHTROEHREN-ANLAGEN MIT EINER LEERLAUFSPANNUNG VON UEBER 1000 V, ABER NICHT UEBER 10000 V
|
|
EN 61050:1992/A1:1995
|
TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS - GENERAL AND SAFETY REQUIREMENTS
|
|
DIN EN 60598-1 : 2015 COR 1 2016
|
LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60598-1:2014, MODIFIED)
|
|
DIN VDE 0470-1 : 1992
|
|
|
VDE 0711-1 : 2015 COR 1 2016
|
LEUCHTEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN UND PRUEFUNGEN (IEC 60598-1:2014, MODIFIZIERT)
|
|
VDE 0713-6 : 1994 COR 1 1995
|
TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS
|
|
DIN VDE 0100 : 1973
|
ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES BELOW 1000 V
|
|
DIN EN 61547 : 2010 COR 1 2010
|
EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
|
|
VDE 0609-1 : 2000
|
CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2]
|
|
EN 50143:2009
|
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V
|
|
VDE 0838-2 : 2015
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014)
|
|
DIN EN 50143 : 2010
|
CABLES FOR SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1000 V BUT NOT EXCEEDING 10000 V
|
|
DIN EN 61000-3-2 : 2015
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014)
|
|
DIN VDE 0100-551 : 2017-02
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS (IEC 60364-5-55:2001/A2:2008 (CLAUSE 551))
|
|
EN 61000-3-2:2014
|
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
|
|
VDE 0712-41 : 2002 COR 1 2011
|
SPECIFICATIONS FOR LAMP CONTROL GEAR - PART 2-11: PARTICULAR REQUIREMENTS FOR ELECTRONIC CONVERTERS FOR HIGH FREQUENCY OPERATION OF COLD START TUBULAR DISCHARGE LAMPS (NEON TUBES)
|
|
VDE 0875-15-2 : 2010 COR 1 2010
|
Corrigendum to DIN EN 61547 (VDE 0875-15-2):2010-03; (IEC-Cor.:2010 to IEC 61547:2009)
|
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
|
EN 61547:2009
|
Equipment for general lighting purposes - EMC immunity requirements
|
|
ISO 3864:1984
|
Safety colours and safety signs
|
|
DIN EN 61050 : 1994 COR 1 1995
|
TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS
|
