DIN EN 60922 : 1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
12-01-2001
01-12-2013
Vorwort
Hauptabschnitt 1 - Allgemeine Anforderungen
1 Allgemeines
2 Definitionen
3 Allgemeine Anforderungen
4 Allgemeines über Prüfungen
5 Einteilung
6 Aufschriften
6.1 Verbindliche Aufschriften
6.2 Informationen, die gegebenenfalls zur Verfügung zu
stellen sind
6.3 Weitere Informationen
6.4 Aufschriften müssen dauerhaft und gut lesbar sein
7 Schutz gegen zufällige Berührung aktiver Teile
8 Anschlussklemmen
9 Schutzleiteranschluss
10 Feuchtebeständigkeit und Isolierung
11 Prüfung mit Startspannungsimpuls
12 Wärmebeständigkeit der Wicklungen
13 Vorschaltgeräte-Erwärmung
14 Schrauben, stromführende Teile und Verbindungen
15 Kriech- und Luftstrecken
16 Wärme- und Feuerbeständigkeit, Kriechstromfestigkeit
17 Korrosionsbeständigkeit
Bilder 1 bis 7
Anhang A (normativ) Prüfung der Wärmebeständigkeit
Anhang B (normativ) Anwendung anderer Konstanten S als
4500 in t[w]-Prüfungen
Anhang C (informativ) Zugfreier Raum
Anhang D (normativ) Verfahren für die Auswahl von
Varistoren
Anhang E (normativ) Erläuterungen zu den Temperaturen
der Vorschaltgeräte
Anhang F (normativ) Besondere Anforderungen für thermisch
geschützte Vorschaltgeräte
Anhang ZA (normativ) Normative Verweisungen auf
internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
Describes general and safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Covers inductive-type ballasts for use on a.c. supplies up to 1,000V at 50 Hz or 60 Hz associated with discharge lamps, having rated wattages, dimensions and characteristics as given in relevant IEC lamp standards according to IEC Publications 188, 192 and 662. Tests described are type tests. Requirements for testing individual ballasts during production are not included.
| DevelopmentNote |
Supersedes DIN VDE 0712-12. (07/2004)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 60922 : 1997 | Identical |
| NF EN 60922 : 1999 | Identical |
| BS EN 60922:1997 | Identical |
| I.S. EN 60922:1998 | Identical |
| UNE-EN 60922:1998 | Identical |
| EN 60922:1997 | Identical |
| IEC 60922:1997 | Identical |
| VDE 0712-12 : 1997 | Corresponds |
| SN EN 60922 : 1997 | Identical |
| VDE 0712-12 : 1997 | Identical |
| DIN EN 60926 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| VDE 0712-14 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| DIN EN 60317 : AMD 100 1998 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - AMENDMENT A100 TO PARTS OF THE DIN EN 60317 SERIES |
| DIN EN 60921 : 2007 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| IEC 60730-2-3:2006 | Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
| VDE 0631-2-3 : 2008-06 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| IEC 60695-2-1:1991 | Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| EN 60920:1991/A11:2000 | BALLAST FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 60691 : 2017 | THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE (IEC 60691:2015 + COR1:2016) |
| VDE 0821 : 2017 | THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE (IEC 60691:2015 + COR1:2016) |
| IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| DIN EN 60598-1 : 2015 COR 1 2016 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60598-1:2014, MODIFIED) |
| DIN VDE 0470-1 : 1992 | |
| VDE 0711-1 : 2015 COR 1 2016 | LEUCHTEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN UND PRUEFUNGEN (IEC 60598-1:2014, MODIFIZIERT) |
| VDE 0712-11 : 2007 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| VDE 0715-4 : 1994 | LAMPS - HIGH-PRESSURE MERCURY VAPOUR LAMPS |
| EN 60691:2016 | Thermal-links - Requirements and application guide |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| EN 60923:2005/A1:2006 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
| DIN EN 60730-2-3 : 2008-06 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| EN 60249-1 : 1993 COR 1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| DIN EN 60920 : 1993 AMD 11 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| EN 60921:2004/A1:2006 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60691:2015 | Thermal-links - Requirements and application guide |
| DIN EN 60249-1:1994-05 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| VDE 0712-10 : 93 AMD 11 2000 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS; GENERAL AND SAFETY REQUIREMENTS |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| EN 60730-2-3:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| DIN EN 60192:2002-03 | LOW-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| DIN EN 60662:2013-03 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| IEC 60417C:1977 | Third supplement. |
| DIN VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60923:2005+AMD1:2006 CSV | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
| HD 243 : S12 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - INDEX, SURVEY AND COMPILATION OF THE SINGLE SHEETS |
| VDE 0715-3 : 1996 | LOW PRESSURE SODIUM VAPOUR LAMPS |
| EN 60695-2-2:1994/A1:1995 | FIRE HAZARD TESTING - TEST METHODS - NEEDLE-FLAME TEST |
| IEC 60926:1995+AMD1:1999 CSV | Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirements |
| IEC 60922:1997 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
| IEC 60920:1990 | Ballasts for tubular fluorescent lamps - General and safety requirements |
| DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.