DIN EN ISO 11689:1997-03
Current
Current
The latest, up-to-date edition.
ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT
Available format(s)
Hardcopy , PDF
Published date
01-01-1997
1 Scope
2 Normative reference
3 Definitions
4 Machine classification
5 Noise-emission data
6 Presentation of noise-emission values
7 Evaluation of noise-emission data
8 Steps to be followed when determining noise-control
performance
9 Information to be recorded
10 Information to be reported
Annexes
A Calculation of a linear regression
B Examples of evaluation of noise-emission data
C Example of the presentation of noise-emission data
in accordance with this International Standard
(form sheet to be copied)
D Bibliography
This standard is included in DIN Handbook 315 and 315/2. Defines a method for establishment of noise-control performance for a family, type, group or sub-group of machinery or equipment on a noise-emission data basis. In principle it applies to all machinery or equipment with a noise test code or comparable noise- emission data.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 11689 : 1997 | Identical |
| NS EN ISO 11689 : 1996 AC 2009 | Identical |
| NEN EN ISO 11689 : 1997 C1 2009 | Identical |
| SN EN ISO 11689 : 2007 CORR 2009 | Identical |
| UNE-EN ISO 11689:1997 | Identical |
| BS EN ISO 11689 : 1997 | Identical |
| I.S. EN ISO 11689:1997 | Identical |
| NBN EN ISO 11689 : 1997 COR 2009 | Identical |
| EN ISO 11689:1996/AC:2009 | Identical |
| ISO 11689:1996 | Identical |
| UNI EN ISO 11689 : 1998 | Identical |
| DIN HDBK 315 : 1ED 1997 | AKUSTIK, LAERMMINDERUNG UND SCHWINGUNGSTECHNIK 3 - MESSUNG DER GERAEUSCHEMISSION VON MASCHINEN |
| DIN HDBK 315/2 : 2ED 2011 | MESSUNG DER GERAEUSCHEMISSION VON MASCHINEN - BESTIMMUNG DES EMISSIONS-SCHALLDRUCKPEGELS, ANWENDUNG VON GERAEUSCHEMISSIONSWERTEN |
| DIN EN ISO 11688-1:2009-11 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| DIN EN ISO 11688-2:2001-03 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000 |
| VDI 3743 Blatt 1:2003-09 | Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps |
| VDI 3765:2001-12 (Draft) | KENNZEICHNENDE GERAEUSCHEMISSION TYPISCHER ARBEITSABLAEUFE AUF BAUSTELLEN |
| VDI 3767:1997-10 | Characteristic noise emission values of technical sound sources - Machines for the forming of concrete blocks |
| VDI 3753:1997-10 | Characteristic noise emission values of technical sound sources - Reciprocating internal combustion (RIC) engines |
| DIN EN ISO 23771:2015-06 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 3742:1988 | Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 12001:1996 | Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| DIN EN ISO 11201:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3743-2:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| DIN EN ISO 11204:2010-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 27574-1 : 1988 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| DIN EN ISO 3744:2011-02 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| DIN EN ISO 11200:2014-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| DIN ISO 5725-1:1997-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| DIN EN 23741:1991-11 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 23742 : 1991 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHOD FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| DIN EN ISO 3746:2011-03 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 23741 : 1991 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROADBAND SOURCES IN REVERBERATION ROOMS |
| DIN 45635-1:1984-04 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; ENVELOPING SURFACE METHOD; BASIC REQUIREMENTS FOR 3 ACCURACY CLASSES |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| DIN 45649-2:1989-03 | ACOUSTICS; VERIFIABLE STATED NOISE EMISSION VALUES FOR MACHINES; SPLIT PRESENTATION |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| DIN 45649-1:1989-03 | ACOUSTICS; VERIFIABLE STATED NOISE EMISSION VALUES FOR MACHINES; SINGLE VALUED PRESENTATION |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| DIN EN ISO 11202:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| DIN EN ISO 9614-1:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| DIN EN ISO 11203:2010-01 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| DIN EN ISO 3743-1:2011-01 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| DIN EN ISO 3743-2:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| IEC 60804:2000 | Integrating-averaging sound level meters |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
| DIN EN 23742:1991-11 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
US$99.89
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.