• There are no items in your cart

DIN EN ISO 11890-1:2007-09

Current
Current

The latest, up-to-date edition.

PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2007

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Kurzbeschreibung
5 Erforderliche ergänzende Informationen
6 Probenahme
7 Durchführung
   7.1 Anzahl der Bestimmungen und allgemeine
        Prüfbedingungen
   7.2 Bestimmung der Parameter
   7.3 Dichte
   7.4 Gehalt an nicht flüchtigen Anteilen
   7.5 Wassergehalt
   7.6 Ausgenommene Verbindungen (nur, wenn nationale
        Gesetzgebungen gelten)
8 Berechnung
   8.1 Allgemeines
   8.2 Verfahren 1: VOC-Gehalt, als Massenanteil in Prozent,
        des Produktes im gebrauchsfertigen Zustand
   8.3 Verfahren 2: VOC-Gehalt, in Gramm je Liter, des Produktes
        im gebrauchsfertigen Zustand
   8.4 Verfahren 3: VOC-Gehalt, in Gramm je Liter, des Produktes
        im gebrauchsfertigen Zustand abzüglich Wasser
   8.5 Verfahren 4: VOC-Gehalt, in Gramm je Liter, des Produktes
        im gebrauchsfertigen Zustand abzüglich Wasser und
        abzüglich ausgenommener Verbindungen (nur, wenn nationale
        Gesetzgebungen gelten)
9 Auswertung
10 Präzision
   10.1 Allgemeines
   10.2 Wiederholgrenze r
   10.3 Vergleichgrenze R
11 Prüfbericht
Anhang A (normativ) Erforderliche ergänzende Informationen
Literaturhinweise

This standard is included in DIN Handbook 201. Deals with the testing and sampling of paints, varnishes and related products. Specifies a method to determine the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This standard may be used where the expected VOC content is greater than about 15 % by mass. When the expected VOC content is greater than 0,1 % by mass and less than about 15 % by mass, ISO 11890-2 shall be employed. The method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds may be present and may need to be quantified by another suitable method and allowed for in the calculations.

DevelopmentNote
Supersedes DIN ISO 11890-1. (04/2002)
DocumentType
Standard
Pages
16
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN HDBK 201 : 8ED 2017 ROHSTOFFE FUER BESCHICHTUNGSSTOFFE 2 - BINDEMITTEL, LOESEMITTEL UND WEICHMACHER - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN
BWB TL 8010-0048 : 2ED MAY 2006
DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
VDI 3456:2009-12 Emission control - Refinishing and finishing of vehicles
VDI 3455:2013-08 Emission control - High-volume car body painting plants
BWB TL 8010-0045 : 1ED 2006 DECKBESCHICHTUNGSSTOFFE FUER LUFTFAHRZEUGE 2-KOMPONENTEN-POLYURETHAN-DECKBESCHICHTUNGSSTOFFE, BW-EIGENBEDARF
BWB TL 8010-0047 : 2ED MAY 2006
DIN EN ISO 17895:2005-06 PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND CONTENT OF LOW-VOC EMULSION PAINTS (IN-CAN VOC)

DIN EN ISO 2811-1:2016-08 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
DIN ISO 5725-2:2002-12 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method
DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
DIN ISO 5725-1:1997-11 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS
DIN EN ISO 15528:2013-12 PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013)
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
DIN EN ISO 1513:2010-10 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
DIN EN 23270:1991-09 PAINTS, VARNISHES AND THEIR RAW MATERIALS; TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DIN EN ISO 3251:2008-06 PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 2811-4:2011 Paints and varnishes Determination of density Part 4: Pressure cup method
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
ISO 760:1978 Determination of water Karl Fischer method (General method)

View more information
US$81.76
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.