DIN EN ISO 14373:2015-06
Current
The latest, up-to-date edition.
Hardcopy , PDF
German, English
01-01-2015
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Materials
6 Surface conditions
7 Edge conditions, form of component, and weld
spacing
8 Electrodes
9 Weld assessment
10 Weld quality requirements
11 Multi-weld arrays
Annex A (informative) - Recommendations for spot
welding equipment
Annex B (informative) - Typical spot welding conditions
Annex C (informative) - Partial list of steel types applicable
to this International Standard
Bibliography
This standard is included in DIN Handbook 312.
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
BS EN ISO 14373:2015 | Identical |
NEN EN ISO 14373 : 2015 | Identical |
ISO 14373:2015 | Identical |
EN ISO 14373:2015 | Identical |
UNI EN ISO 14373 : 2008 | Identical |
NBN EN ISO 14373 : 2015 | Identical |
I.S. EN ISO 14373:2015 | Identical |
SN EN ISO 14373:2015 | Identical |
NF EN ISO 14373 : 2015 | Identical |
NS EN ISO 14373 : 2015 | Identical |
DIN ISO 16338:2014-08 | WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING (ISO 16338:2017) |
DIN DVS HDBK 312/1 : 3ED 2010 | SCHWEISSTECHNIK 9 - WIDERSTANDSSCHWEISSEN - AUSBILDUNG, GRUNDLAGEN, VERFAHREN UND WERKSTOFFE |
DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
DIN DVS HDBK 312 : 4ED 2017 | |
DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
DIN EN ISO 18595:2007-12 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007); German version EN ISO 18595:2007 |
DIN EN ISO 14270:2002-04 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR MECHANIZED PEEL TESTING RESISTANCE SPOT, SEAM AND EMBOSSED PROJECTION WELDS (ISO 14270:2016) |
ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
DIN EN ISO 15614-12:2014-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014); German version EN ISO 15614-12:2014 |
ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
ISO 5830:1984 | Resistance spot welding Male electrode caps |
ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
DIN EN ISO 10447:2015-05 | Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015) |
DIN EN ISO 14329:2003-12 | Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003); German version EN ISO 14329:2003 |
DIN ISO 669:2001-06 | RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS |
DIN EN ISO 15609-5:2012-03 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011) |
ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
DIN ISO 5184:1984-04 | STRAIGHT RESISTANCE SPOT WELDING ELECTRODES |
ISO 9364:2011 | Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities |
ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
DIN EN ISO 5821:2010-04 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
ISO 14329:2003 | Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds |
DIN EN ISO 5182:2015-03 (Draft) | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
DIN EN ISO 17677-1:2010-01 | RESISTANCE WELDING - VOCABULARY - PART 1: SPOT, PROJECTION AND SEAM WELDING |
ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
ISO 4950-2:1995 | High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition |
ISO 4950-1:1995 | High yield strength flat steel products — Part 1: General requirements |
ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
ISO 5184:1979 | Straight resistance spot welding electrodes |
ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.