DIN EN ISO 18278-1:2015-08
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
08-29-2022
German, English
08-01-2015
National foreword
National Annex NA (informative) - Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Weldability
5 Preparation of welding equipment
6 Test procedures
7 Test report
Annex A (informative) - How to evaluate the mass
and friction of the welding head
Bibliography
This standard is included in DIN Handbook 312.
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN ISO 18278-1 : 2015 | Identical |
ISO 18278-1:2015 | Identical |
NBN EN ISO 18278-1 : 2015 | Identical |
NEN EN ISO 18278-1 : 2015 | Identical |
NS EN ISO 18278-1 : 2004 | Identical |
I.S. EN ISO 18278-1:2015 | Identical |
SN EN ISO 18278-1:2015 | Identical |
UNI EN ISO 18278-1 : 2006 | Identical |
UNE-EN ISO 18278-1:2015 | Identical |
BS EN ISO 18278-1:2015 | Identical |
EN ISO 18278-1:2015 | Identical |
ONORM EN ISO 18278-1 : JUL 2015 | Identical |
DIN DVS HDBK 312 : 4ED 2017 | |
DIN DVS HDBK 393 : 1ED 2006 | SCHWEISSTECHNIK 11 - NORMEN, DVS-MERKBLAETTER UND RICHTLINIEN IM BEREICH WIDERSTANDSSCHWEISSEN - PRUEFEN UND QUALITAETSSICHERUNG |
DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
DIN DVS HDBK 312/2 : 3ED 2010 | SCHWEISSTECHNIK 11 - WIDERSTANDSSCHWEISSEN - QUALITAETSSICHERUNG UND PRUEFUNG |
DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
DIN EN ISO 14554-2:2014-05 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 2: ELEMENTARY QUALITY REQUIREMENTS (ISO 14554-2:2013) |
DIN EN ISO 14270:2002-04 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR MECHANIZED PEEL TESTING RESISTANCE SPOT, SEAM AND EMBOSSED PROJECTION WELDS (ISO 14270:2016) |
DIN EN ISO 17657-2:2007-09 | Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
ISO 14373:2015 | Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
ISO 14554-2:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements |
ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
ISO 14323:2015 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds |
ISO 17657-2:2005 | Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil |
DIN EN ISO 15614-12:2014-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014); German version EN ISO 15614-12:2014 |
ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
DIN EN ISO 17654:2011-12 | Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011) |
DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
DIN EN ISO 18592:2010-05 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS |
DIN EN ISO 10447:2015-05 | Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015) |
ISO 14272:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds |
DIN EN ISO 14272:2002-04 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR CROSS TENSION TESTING OF RESISTANCE SPOT AND EMBOSSED PROJECTION WELDS (ISO 14272:2016) |
ISO 14273:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds |
DIN EN ISO 15609-5:2012-03 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011) |
DIN EN ISO 14271:2012-11 | RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
ISO 17654:2011 | Resistance welding Destructive tests of welds Pressure test of resistance seam welds |
DIN EN ISO 17653:2012-08 | Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012) |
ISO 17653:2012 | Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds |
AWS D8.9M : 2012 | TEST METHODS FOR EVALUATING THE RESISTANCE SPOT WELDING BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALS |
ISO 16432:2006 | Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
DIN EN ISO 5821:2010-04 | Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
DIN EN ISO 14323:2015-06 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR IMPACT TENSILE SHEAR TEST AND CROSS-TENSION TESTING OF RESISTANCE SPOT AND EMBOSSED PROJECTION WELDS (ISO 14323:2015) |
DIN EN ISO 16432:2007-09 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
ISO 693:1982 | Dimensions of seam welding wheel blanks |
DIN ISO 693:1985-10 | DIMENSIONS OF SEAM WELDING WHEEL BLANKS |
ISO 18592:2009 | Resistance welding Destructive testing of welds Method for the fatigue testing of multi-spot-welded specimens |
DIN EN ISO 14273:2002-03 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR TENSILE SHEAR TESTING RESISTANCE SPOT AND EMBOSSED PROJECTION WELDS (ISO 14273:2016) |
DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
ISO 8167:1989 | Projections for resistance welding |
DIN EN ISO 5182:2015-03 (Draft) | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
SEP 1220-2 : 2011 | TESTING AND DOCUMENTATION GUIDELINE FOR THE JOINABILITY OF THIN SHEET OF STEEL - PART 2: RESISTANCE SPOT WELDING |
ISO 18278-2:2016 | Resistance welding Weldability Part 2: Evaluation procedures for weldability in spot welding |
ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
DIN EN ISO 16433:2007-09 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
ISO 16433:2006 | Resistance welding Procedure for seam welding of uncoated and coated low carbon steels |
DIN EN ISO 17677-1:2010-01 | RESISTANCE WELDING - VOCABULARY - PART 1: SPOT, PROJECTION AND SEAM WELDING |
DIN EN ISO 669:2016-07 | RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016) |
DIN EN ISO 14554-1:2014-05 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
ISO 14324:2003 | Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints |
ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
DIN EN ISO 14324:2003-12 | RESISTANCE SPOT WELDING - DESTRUCTIVE TESTS OF WELDS - METHOD FOR THE FATIGUE TESTING OF SPOT WELDED JOINTS |
ISO/TR 581:2005 | Weldability Metallic materials General principles |
ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.