DIN ISO 17359:2011-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
Available format(s)
Hardcopy , PDF
Superseded date
03-07-2021
Language(s)
English, German
Published date
01-01-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Overview of condition monitoring procedure
5 Equipment audit
6 Reliability and criticality audit
7 Measurement method
8 Data collection and analysis
9 Determine maintenance action
10 Review
11 Training
Annex A (informative) Examples of condition monitoring
parameters
Annex B (informative) Matching fault(s) to measured
parameter(s) or technique(s)
Annex C (informative) Typical information to be recorded
when monitoring
Bibliography
Provides guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this process.
| DevelopmentNote |
DRAFT 2017 issued in June 2017. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 17359:2011 | Identical |
| DIN ISO 18129:2016-01 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - APPROACHES FOR PERFORMANCE DIAGNOSIS (ISO 18129:2015) |
| DIN ISO 13373-3:2015-12 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015) |
| VDI 4550 Blatt 1:2017-04 | Vibration analysis - Procedures and presentation of results - Terminology and basic principles |
| VDI 2878 Blatt 1:2012-05 | Application of thermography to maintenance diagnostics - General requirements and information for decision makers and managers |
| DIN ISO 18436-2:2014-11 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014) |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| DIN ISO 7919-4:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS (ISO 7919-4:2009 + AMD.1:2017) |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| DIN ISO 18436-1:2013-05 | Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 1: Requirements for assessment bodies and the assessment process (ISO 18436-1:2012) |
| DIN ISO 6954:2001-06 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT, REPORTING AND EVALUATION OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS |
| DIN ISO 10816-7:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS |
| ISO 10055:1996 | Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components |
| DIN ISO 7919-5:2005-10 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 5: MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMPING PLANTS |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| ISO 14694:2003 | Industrial fans Specifications for balance quality and vibration levels |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60300-3-3:2017 | Dependability management - Part 3-3: Application guide - Life cycle costing |
| DIN ISO 7919-1:1997-08 | MECHANICAL VIBRATION OF NON-RECIPROCATING MACHINES - MEASUREMENTS ON ROTATING SHAFTS AND EVALUATION - PART 1: GENERAL GUIDELINES |
| ISO 13381-1:2015 | Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| ISO 8579-2:1993 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| DIN 1945-1:1980-11 | DISPLACEMENT COMPRESSOR; THERMODYNAMIC ACCEPTANCE AND PERFORMANCE TEST |
| IEC 61078:2016 | Reliability block diagrams |
| ISO 10816-5:2000 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 5: Machine sets in hydraulic power generating and pumping plants |
| DIN ISO 18436-2:2014-11 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014) |
| ISO 6954:2000 | Mechanical vibration Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| ISO 5389:2005 | Turbocompressors — Performance test code |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| ISO 10816-6:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW |
| ISO 13350:2015 | Fans Performance testing of jet fans |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ISO 14695:2003 | Industrial fans Method of measurement of fan vibration |
| DIN EN ISO 5801:2011-11 | FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801:2017) |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 19499:2007 | Mechanical vibration Balancing Guidance on the use and application of balancing standards |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| DIN 8957-4:1975-10 | AIR CONDITIONERS; TESTS FOR HEATING OPERATION OF THE REFRIGERATING SYSTEM/HEAT PUMP |
| DIN ISO 13373-2:2006-01 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, ANALYSIS AND PRESENTATION OF VIBRATION DATA (ISO 13373-2:2016) |
| DIN ISO 7919-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| DIN ISO 8528-9:1999-01 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 9: MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| DIN ISO 7919-3:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES (ISO 7919-3:2009 + AMD.1:2017) |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance |
| ISO 3046-1:2002 | Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
| ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 3046-3:2006 | Reciprocating internal combustion engines Performance Part 3: Test measurements |
| ASME PTC22 : 2014 | GAS TURBINES |
| DIN EN ISO 13350:2016-02 | FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015) |
US$136.16
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.