|
VDE 0551-100 : DRAFT AMD 7 84
|
|
|
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
|
|
DIN VDE 0609-1 : 1983
|
SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]
|
|
DIN VDE 0820-1 : 1992
|
MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINK
|
|
DIN VDE 0560-2 : 1970
|
SPECIFICATION FOR CAPACITORS - PART 2: COUPLING CAPACITORS FOR VOLTAGES UP TO 1000 V AND POWERS UP TO 0.5 KVAR
|
|
DIN 44055:1983-09
|
RESISTORS, FIXED, LACQUERED, CRACKED CARBON FILM, HIGH STABILITY, WITH LOW DRIFT AND LOW FAILURE-RATE AND WITH AXIAL LEADS
|
|
DIN 40040:1987-04
|
APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS
|
|
IEC 60127:1974
|
Cartridge fuse-links for miniature fuses
|
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
|
DIN VDE 0110-1 : 1997
|
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
|
|
DIN 41431:1983-10
|
RESISTORS, FIXED - VITREOUS ENAMELLED WIREWOUND RESISTORS WITH WIRE LEADS
|
|
IEC 60364-5-523:1999
|
Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems
|
|
DIN 41661 : 1979
|
MINIATURE FUSES - CARTRIDGE FUSE LINKS 5 MM X 20 MM, QUICK-ACTING, LOW BREAKING CAPACITY
|
|
DIN 41216:1974-05
|
ELECTRICAL COMMUNICATIONS ENGINEERING - RELAYS, TEST, CONDITIONS
|
|
DIN 44052:1983-09
|
RESISTORS, FIXED, LACQUERED, CRACKED CARBON FILM, HIGH STABILITY, WITH AXIAL LEADS
|
|
DIN 44050:1982-09
|
FIXED RESISTORS, NON-WIREWOUND - TERMINOLOGY, CHARACTERISTICS, METHODS OF TEST AND APPLICATION
|
|
DIN 45930-1;CECC 50000:1987-06
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DISCRETE SEMICONDUCTOR DEVICES
|
|
DIN VDE 0845-1 : 1987
|
PROTECTION OF TELECOMMUNICATION SYSTEMS AGAINST LIGHTNING, ELECTROSTATIC DISCHARGES AND OVER-VOLTAGES FROM ELECTRIC POWER INSTALLATIONS; PROVISIONS AGAINST OVER-VOLTAGES
|
|
DIN VDE 0100-540 : 2012-06
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS (IEC 60364-5-54:2011)
|
|
EN 60742:1995
|
Isolating transformers and safety isolating transformers - Requirements
|
|
DIN 45920;CECC 40000:1989-11
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT OF ELECTRONIC COMPONENTS; GENERIC SPECIFICATIONS; FIXED RESISTORS
|
|
DIN VDE 0800-1 : 1989
|
TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS
|
|
DIN 41668 : 1979
|
MINIATURE FUSES - CARTRIDGE FUSE LINKS 6,3 MM X 32 MM, QUICK-ACTING, LOW BREAKING CAPACITY
|
|
DIN VDE 0298-4 : 1998
|
APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 4: RECOMMENDED CURRENT-CARRYING CAPACITY FOR SHEATHED AND NONSHEATHED CABLES FOR FIXED WIRINGS IN AND AROUND BUILDINGS AND FOR FLEXIBLE CABLES AND CORDS
|
|
DIN 44063:1983-09
|
RESISTORS, FIXED, INSULATED, METAL-OXIDE FILM, HIGH STABILITY, WITH AXIAL LEADS
|
|
DIN VDE 0800-8 : 1989
|
TELECOMMUNICATIONS; APPLICATION OF KU VALUES
|
|
IEC 60099-1:1991+AMD1:1999 CSV
|
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
|
|
DIN VDE 0609-2 : 1983
|
SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM(HOCH)2 - CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM(HOCH)2
|
|
DIN 44061:1983-09
|
RESISTORS, FIXED, LACQUERED, METAL FILM, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT - WITH AXIAL LEADS
|
|
DIN 44051:1983-09
|
RESISTORS, FIXED, LACQUERED, CRACKED CARBON FILM, STANDARD STABILITY, WITH AXIAL LEADS
|
|
IEC 60685-1:1980
|
Connecting devices (junction and/or tapping) for household and similar fixed electrical installations - Part 1: General requirements
|
|
DIN VDE 0804 : 1989 AMD 1 1992
|
TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
|
|
DIN 41662 : 1979
|
MINIATURE FUSES - CARTRIDGE FUSE LINKS 5 MM X 20 MM, TIME LAG, LOW BREAKING CAPACITY
|
|
DIN 45923-1;CECC 42000:1983-06
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; GENERIC SPECIFICATION: VARISTORS
|
|
DIN 41660 : 1979
|
MINIATURE FUSES - CARTRIDGE FUSE LINKS 5 MM X 20 MM, QUICK-ACTING, HIGH BREAKING CAPACITY
|
|
DIN VDE 0884 : 1987
|
OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST
|
|
DIN 44064:1983-09
|
RESISTORS, FIXED, INSULATED, METAL-GLAZE FILM - HIGH STABILITY, WITH AXIAL LEADS
|
|
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements
|
