EN 10080:2005
Current
Current
The latest, up-to-date edition.
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Published date
05-25-2005
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Designation
5.1 Bar, coil and de-coiled product
5.2 Welded fabric
5.3 Lattice girders
6 Steelmaking and manufacturing processes
7 Performance characteristics
7.1 Weldability and chemical composition
7.2 Mechanical properties
7.3 Dimensions, mass and tolerances
7.4 Bond strength and surface geometry
7.5 Verification of performance characteristics
8 Evaluation of conformity
8.1 Factory production control
8.2 Initial type testing
8.3 Continuous surveillance of factory
production control and audit testing
8.4 Evaluation, reporting and action
8.5 Assessment of the long term quality level
9 Test methods
9.1 Bars, coils and de-coiled products
9.2 Welded fabric
9.3 Lattice girders
10 Identification of the manufacturer and the
technical class
10.1 Bar
10.2 Coil
10.3 De-coiled product
10.4 Welded fabric
10.5 Lattice girders
11 Verification of mechanical properties in the case
of dispute
Annex A (informative) Examples of weld points in
lattice girder joints
Annex B (normative) Test methods for lattice girders
Annex C (informative) Bond test for ribbed and indented
reinforcing steel - Beam test
Annex D (informative) Bond test for ribbed and indented
reinforcing steel - Pull-out test
Annex E (informative) Comparison of symbols used in this
European Standard with those used in
EN 1992-1-1 and EN 1992-1-2
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the EU
Construction Products Directive
Bibliography
This document specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:-bars, coils (rod, wire) and de-coiled products;-sheets of factory-made machine-welded fabric;-lattice girders.1.2Steels according to this document have a ribbed, indented or smooth surface.1.3This document does not apply to:-non-weldable reinforcing steel;-galvanized reinforcing steel;-epoxy-coated reinforcing steel;-corrosion resistant reinforcing steel;-prestressing steels (see prEN 10138-1 to -4);-indented strip;-further processing, e.g. cutting or cutting and bending.
| Committee |
CEN/TC 459/SC 4
|
| DevelopmentNote |
Supersedes ENV 10080. (10/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 10080:2005-08 | Identical |
| I.S. EN 10080:2005 | Identical |
| PN EN 10080 : 2007 | Identical |
| NBN EN 10080 : 2005 | Identical |
| NEN EN 10080 : 2005 | Identical |
| UNI EN 10080 : 2005 | Identical |
| SN EN 10080 : 2005 | Identical |
| UNE-EN 10080:2006 | Identical |
| NF EN 10080 : 2005 | Identical |
| NS EN 10080 : 1ED 2005 | Identical |
| BS EN 10080:2005 | Identical |
| 08/30192726 DC : 0 | BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| DIN EN 13381-5:2015-02 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| 13/30284484 DC : 0 | BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN ISO 14713-2:2009 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
| UNE-EN 13381-3:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
| I.S. ENV 1992-1-1:1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 12/30268276 DC : 0 | BS EN 12602:2008/A1 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| PREN 14199 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNI EN 15037-1 : 2008 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
| UNI EN 13381-5 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| 12/30265747 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| 13/30280743 DC : 0 | BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| PREN 1536 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| 07/30166420 DC : DRAFT AUG 2007 | BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| DIN EN 15381:2008-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 10/30212126 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS EN 14490:2010 | Execution of special geotechnical works. Soil nailing |
| BS EN 13381-3:2015 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members |
| 08/30186605 DC : DRAFT OCT 2008 | BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| PREN 50632-2-6 : DRAFT 2014 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| S.R. CEN TS 1992-4-2:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS |
| DD CEN/TS 1992-4-2:2009 | Design of fastenings for use in concrete Headed fasteners |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| PREN 1992-4 : DRAFT 2013 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| I.S. EN 15037-1:2008 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
| S.R. CEN TS 1992-4-1:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| UNI CEN/TS 1992-4-2 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS |
| UNE-EN 1992-1-2:2011 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design |
| DD CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete General |
| 13/30286967 DC : 0 | BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| I.S. EN 15381:2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS EN 13877-1:2013 | Concrete pavements Materials |
| BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
| BS EN 13230-1:2016 | Railway applications. Track. Concrete sleepers and bearers General requirements |
| BS EN 12699:2015 | Execution of special geotechnical works. Displacement piles |
| DIN EN 1537:2001-01 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| I.S. EN 12699:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| DIN EN 1881:2007-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| CEN/TS 1992-4-2:2009 | Design of fastenings for use in concrete - Part 4-2: Headed Fasteners |
| EN 13381-3:2015 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
| CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete - Part 4-1: General |
| EN 10079:2007 | Definition of steel products |
| EN 13381-2:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| I.S. EN 1994-1-2:2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| 94/106646 DC : DRAFT AUG 1994 | BS EN 1544 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER TENSILE STRENGTH AT +23 DEGREES C AND +50 DEGREES C FOR SYNTHETIC RESIN PRODUCTS |
| 12/30259157 DC : 0 | BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| DIN EN ISO 14713-2 E : 2010 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| 13/30277618 DC : 0 | BS EN 60745-2-6:2010/AA - HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| I.S. EN 13381-3:2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| 14/30310038 DC : 0 | BS EN 50632-2-6 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 08/30192723 DC : 0 | BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| PREN 1317-5 : DRAFT 2013 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN 50632-2-6:2015 | Electric motor-operated tools. Dust measurement procedure Particular requirements for hammers |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| DIN EN 15037-1:2008-07 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| 12/30254408 DC : 0 | BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI CEN/TS 1992-4-1 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| DIN EN ISO 14713-1 E : 2010 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNI EN 13381-2 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| BS EN 13369:2013 | Common rules for precast concrete products |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNI EN ISO 14713-2 : 2010 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
| DIN EN 1537:2014-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| DIN EN ISO 17660-1:2006-12 | WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
| DIN EN 12699:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| DIN EN 1544:2007-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 1538:2015-10 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| DIN EN 15184 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| DIN EN 14199:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| DIN EN 14475:2006-04 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| DIN EN 15183 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
| BS EN 1538 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS |
| BS EN 14620-3:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Concrete components |
| I.S. EN 13877-1:2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 1996-1-1:2013-02 | Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012) |
| I.S. EN 15050:2007 | PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
| EN 50632-2-6:2015 | Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers |
| DIN EN 1536:2015-10 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 13747:2005 | Precast concrete products - Floor plates for floor systems |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 845-2:2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| I.S. EN 1536:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 1537:2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| I.S. EN 1996-1-1:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1538:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| I.S. EN 13230-1:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14199:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 15050 : 2012 | PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
| UNE-EN 13381-2:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
| UNE-EN 1992-1-1:2013 | Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings |
| I.S. EN 13381-2:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| I.S. EN 1996-3:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 97/102971 DC : DRAFT APR 1997 | PREN 12843 - PRECAST CONCRETE MASTS AND POSTS |
| BS EN 15037-1:2008 | Precast concrete products. Beam-and-block floor systems Beams |
| DIN EN 15381 E : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 97/100665 DC : DRAFT JAN 1997 | PREN 12725 - GLASS IN BUILDING - GLASS BLOCK WALLS - DESIGN, DIMENSIONS AND PERFORMANCE |
| BS EN ISO 14713-2:2009 | Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Hot dip galvanizing |
| 95/102829 DC : DRAFT APRIL 1995 | PREN 1881-1 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: PULL-OUT TEST - UNCRACKED CONCRETE |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 13381-2:2014 | Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes |
| 07/30172380 DC : 0 | BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| 03/314375 DC : DRAFT DEC 2003 | BS EN 14844 - PRECAST CONCRETE BOX CULVERTS |
| UNE-EN 13381-5:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| PREN 12699 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| UNE-EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| PREN 13381-5 : DRAFT 2011 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| UNE-EN ISO 14713-2:2011 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN ISO 17660-2:2006-12 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
| DIN EN 1996-3:2010-12 | Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009) |
| DIN EN 15050 E : 2012 | PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
| DIN EN 13747:2010-08 | Precast concrete products - Floor plates for floor systems (includes Amendment A2:2010) |
| BS EN 14475:2006 | Execution of special geotechnical works. Reinforced fill |
| BS EN 15050 : 2007 | PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 15050:2012-06 | Precast concrete products - Bridge elements (includes Amendment A1:2012) |
| I.S. EN 1992-1-1:2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| UNE-EN 15050:2008 | Precast concrete products - Bridge elements |
| EN ISO 17660-1:2006 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 1537 : 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| UNI EN 1994-1-2 : 2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN 13877-1 : 2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| UNI EN 1992-1-2 : 2005 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 13747 : 2010 | PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS |
| UNI EN 1881 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| UNI EN 14475 : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| UNI EN 1996-1-1 : 2013 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| UNI EN 1544 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS |
| 08/30186613 DC : DRAFT OCT 2008 | BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| I.S. EN 13381-5:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| XP CEN/TS 1992-4-2 : 2009 XP | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 08/30186609 DC : DRAFT OCT 2008 | BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| UNI EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 13381-2:2014-12 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| 14/30292279 DC : 0 | BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 14713-1:2017 | Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance |
| DIN EN ISO 14713-1:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| DIN EN 16432-2 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| PREN 13230-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15080-8:2010-02 | Extended application of results from fire resistance tests - Part 8: Beams |
| UNE-EN 50632-2-6:2015 | Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| UNE-EN 15037-1:2010 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| 12/30259154 DC : 0 | BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| NF EN 14490 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| DIN EN 14490 E : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| DIN EN 1992-1-2:2010-12 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
| PREN 10348-2 : DRAFT 2016 | STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| UNI EN 14490 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| PREN 845-2 : DRAFT 2012 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| I.S. EN 1992-1-2:2005 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 14490:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| DIN EN 14475 E : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
| UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| BS EN 1992-1-2:2004 | Eurocode 2. Design of concrete structures General rules - Structural fire design |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| UNE-EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| UNE-EN 1538:2011 | Execution of special geotechnical work - Diaphragm walls |
| BS EN 13747 : 2005 | PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS |
| ISO 17660-1:2006 | Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints |
| BS EN 10079:2007 | Definition of steel products |
| UNE-EN 14475:2011 | Execution of special geotechnical works - Reinforced fill |
| BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 15184:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
| BS EN 1881:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method |
| BS EN 1536 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| BS EN 1994-1-2 : 2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| BS EN ISO 17660-2:2006 | Welding. Welding of reinforcing steel Non load-bearing welded joints |
| UNE-EN 13670:2013 | Execution of concrete structures |
| EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| EN 1538:2010+A1:2015 | Execution of special geotechnical work - Diaphragm walls |
| EN 845-2:2013+A1:2016 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 1996-3:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES |
| EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| EN 14490:2010 | Execution of special geotechnical works - Soil nailing |
| EN 1544:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars |
| EN 1881:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
| EN 1537:2013 | Execution of special geotechnical works - Ground anchors |
| EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 14620-3:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components |
| EN 13747:2005+A2:2010 | Precast concrete products - Floor plates for floor systems |
| EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| EN 15037-1:2008 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 13670:2009 | Execution of concrete structures |
| EN 14475:2006/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| EN 15050:2007+A1:2012 | Precast concrete products - Bridge elements |
| EN 14199:2015 | Execution of special geotechnical works - Micropiles |
| EN ISO 17660-2:2006 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
| EN 1994-1-2:2005/A1:2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| DIN EN 13381-3:2015-06 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| ISO 6935-2:2015 | Steel for the reinforcement of concrete Part 2: Ribbed bars |
| DIN EN 14490:2010-11 | Execution of special geotechnical works - Soil nailing |
| BS EN 13670:2009 | Execution of concrete structures |
| 07/30151256 DC : 0 | BS EN 13670 - EXECUTION OF CONCRETE STRUCTURES |
| PREN 1538 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| 16/30340708 DC : 0 | BS EN 10348-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| 13/30280740 DC : 0 | BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| BS EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member |
| I.S. EN 50632-2-6:2015 | ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| UNE-EN 1996-1-1:2011 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| I.S. EN ISO 14713-1:2017 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| BS EN 15381:2008 | Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays |
| UNE-EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| UNI EN 13670 : 2010 | EXECUTION OF CONCRETE STRUCTURES |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| UNE-EN 14490:2013 | Execution of special geotechnical works - Soil nailing |
| UNE-EN 1994-1-2:2016 | Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design. |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| XP CEN/TS 1992-4-1 : 2009 XP | DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| EN 13369:2018 | Common rules for precast concrete products |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 1994-1-2:2010-12 | Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
| DIN EN 13877-1:2013-06 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN ISO 17660-1:2006 | Welding. Welding of reinforcing steel Load-bearing welded joints |
| BS EN 1544:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
| UNE-EN 1536:2011 | Execution of special geotechnical work - Bored piles |
| BS EN 14199:2015 | Execution of special geotechnical works. Micropiles |
| BS EN 1537:2013 | Execution of special geotechnical works. Ground anchors |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| DIN EN ISO 14713-2:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
| DIN EN 10079:2007-06 | Definition of steel products |
| EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
| DIN EN 15184:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| DIN EN 15183:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
| EN 10079:2007 | Definition of steel products |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| PREN 10138-2 : DRAFT 2000 | PRESTRESSING STEELS - PART 2: WIRE |
| PREN 10138-3 : DRAFT 2000 | PRESTRESSING STEELS - PART 3: STRAND |
| EN ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
| EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.