• There are no items in your cart

EN 10083-2:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
Superseded date

07-26-2019

Published date

08-02-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
   4.1 Classification
   4.2 Designation
5 Information to be supplied by the purchaser
   5.1 Mandatory information
   5.2 Options
6 Manufacturing process
   6.1 General
   6.2 Deoxidation
   6.3 Heat treatment and surface condition at delivery
   6.4 Cast separation
7 Requirements
   7.1 Chemical composition, hardenability and mechanical
       properties
   7.2 Machinability
   7.3 Shearability of semi-finished products and bars
   7.4 Structure
   7.5 Internal soundness
   7.6 Surface quality
   7.7 Dimensions, tolerances on dimensions and shape
8 Inspection
   8.1 Testing procedures and types of documents
   8.2 Frequency of testing
   8.3 Tests to be carried out for specific inspection
9 Preparation of samples and test pieces
   9.1 Selection and preparation of samples for chemical
       analysis
   9.2 Location and orientation of samples and test pieces
       for mechanical tests
   9.3 Location and preparation of samples for hardness and
       harden ability tests
   9.4 Identification of samples and test pieces
10 Test methods
   10.1 Chemical analysis
   10.2 Mechanical tests
   10.3 Hardness and hardenability tests
   10.4 Retests
11 Marking, labelling, packaging
Annex A (normative) Options
Annex B (informative) Comparison of steel grades specified
        in this European Standard and ISO 683-1:1987 and
        other steel grades previously standardized nationally
Bibliography

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1),bars (see NOTE 2 in EN 10083-1:2006, Clause 1),rod,wide flats,hot-rolled strip and sheet/plate,forgings (see NOTE 2 in EN 10083-1:2006, Clause 1),manufactured from the direct hardening non alloy steels for quenching and tempering and the non alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7, and in one of the surface conditions given in Table 2.The steels are generally intended for the manufacture of quenched and tempered, flame or induction hardened machine parts, but can also be used in the normalized condition.The requirements for mechanical properties given in this document are restricted to the sizes given in Table 9 and Table 10.NOTE This document does not apply for bright steel products. For bright steel products EN 10277-1 and EN 10277-5 apply.In special cases, variations in these technical delivery requirements or additions to them may be agreed at the time of enquiry and order (see Annex A).

Committee
CEN/TC 459/SC 5
DevelopmentNote
Supersedes EURONORM 86. (03/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
96/106185 DC : DRAFT AUG 1996 PREN 1337-5 - STRUCTURAL BEARINGS - PART 5: POT BEARINGS
10/30217322 DC : 0 BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
09/30185897 DC : 0 BS EN 1341 - SLABS OF NATURAL STONE FOR EXTERNAL PAVING - REQUIREMENTS AND TEST METHODS
I.S. EN 10052:1994 VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS
02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 1339:2003-08 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
DIN 6773:2001-04 HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS
EN 10085:2001 Nitriding steels - Technical delivery conditions
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
09/30156692 DC : 0 BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
10/30234616 DC : 0 BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
12/30265276 DC : 0 BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
PREN 10051 : DRAFT 2009 HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 13001-3-3:2014 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 1340:2003/AC:2006 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
ISO 4404:1998 Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13001-3-6:2018 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
BS EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
ISO 9934-2:2015 Non-destructive testing Magnetic particle testing Part 2: Detection media
BS EN 1338:2003 Concrete paving blocks. Requirements and test methods
BS EN 1339:2003 Concrete paving flags. Requirements and test methods
BS EN 12699:2015 Execution of special geotechnical works. Displacement piles
BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
BS EN 1340:2003 Concrete kerb units. Requirements and test methods
BS EN 14420-7:2013 Hose fittings with clamp units Cam locking couplings
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 12699:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
EN 10277-2:2008 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 10277-1:2008 Bright steel products - Technical delivery conditions - Part 1: General
DIN EN 13001-3-3:2015-02 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 1338:2003/AC:2006 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
10/30217328 DC : 0 BS EN 1340 - CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
DIN 86552:2002-04 VALVES, SCREWED BONNET TYPE OF STEEL FOR 24-DEGREE CONNECTION WITH PORT END W ACCORDING TO DIN 3861
UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
10/30234631 DC : 0 BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
I.S. EN 115-1:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
11/30235009 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
06/30146741 DC : 0 EN 10277-5 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 5: STEELS FOR QUENCHING AND TEMPERING
10/30234628 DC : 0 BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
NFL 22-031 : H2003 FASTENERS - SELECTION OF METALLIC MATERIALS
09/30200092 DC : 0 BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 10029 : DRAFT 2009 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN 86041-1:1996-02 WELDING FLANGES - PART 1: TANKS AND SEA BOXES, NOMINAL PRESSURE 10 AND 16
PREN 14420-6 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
PREN 1340 : DRAFT 2010 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
10/30217325 DC : 0 BS EN 1339 - CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
DIN EN 12699:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 10297-1 E : 2003 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 13411-6 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
UNE-EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
ISO 4404-1:2012 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids
BS EN 13748-1 : 2004 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US
BS EN 10277-2:2008 Bright steel products. Technical delivery conditions Steels for general engineering purposes
BS EN 10250-2:2000 Open steel die forgings for general engineering purposes Non-alloy quality and special steels
I.S. EN 14420-6:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
I.S. EN ISO 4404-1:2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
I.S. EN 14420-8:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
I.S. EN 10029:2010 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 14420-8:2016-06 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
DIN EN 10277-5:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 5: STEELS FOR QUENCHING AND TEMPERING
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN ISO 9934-2:2015 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015)
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 14420-7:2013-09 Hose fittings with clamp units - Part 7: Cam locking couplings
I.S. EN 13411-6:2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
I.S. EN 10277-2:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 2: STEELS FOR GENERAL ENGINEERING PURPOSES
I.S. EN 10277-5:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 5: STEELS FOR QUENCHING AND TEMPERING
DIN EN 14420-6:2013-09 Hose fittings with clamp units - Part 6: TW tank truck couplings
DIN EN 14420-4:2013-09 Hose fittings with clamp units - Part 4: Flange connections
I.S. EN 14420-4:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
I.S. EN 10277-1:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
I.S. EN 14420-7:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
DIN EN 10277-1:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10277-2:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 2: STEELS FOR GENERAL ENGINEERING PURPOSES
I.S. EN 10111:2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13204:2016 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 10029 : 2011 Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape
UNI EN 10111 : 2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
VDI 3357:2014-01 Sliding elements in large stamping dies
KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
NFL 06 380-21 : 2003 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
PREN 360 : DRAFT 2016 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
BS EN 13001-3-3:2014 Cranes. General design Limit states and proof of competence of wheel/rail contacts
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN EN 13001-3-3 E : 2015 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
09/30202067 DC : 0 EN 1342 - SETTS OF NATURAL STONE FOR EXTERNAL PAVING - REQUIREMENTS AND TEST METHODS
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
09/30202029 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
PREN 14420-4 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 13748-1:2005-08 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
DIN EN ISO 9934-2:2015-12 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015)
DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
UNE-EN 14420-7:2014 Hose fittings with clamp units - Part 7: Cam locking couplings
DIN EN ISO 4404-1:2012-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
UNE-EN 13204:2017 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
DIN EN ISO 4404-1 E : 2012 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012)
BS EN 13411-6 : 2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
UNI EN 14420-6 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 10051 : 2011 CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 14566 : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 1340 : 2004 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 1338 : 2004 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
UNI EN 14420-7 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
UNI EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
I.S. EN 10250-2:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 2: - NON-ALLOY QUALITY AND SPECIAL STEELS
UNI EN ISO 4404-1 : 2013 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
UNI EN 10277-5 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 5: STEELS FOR QUENCHING AND TEMPERING
UNI EN 10277-2 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 2: STEELS FOR GENERAL ENGINEERING PURPOSES
UNI EN 14420-4 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
UNI EN 1339 : 2005 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
I.S. EN 10087:1999 FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS
UNI EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
PREN 13204 : DRAFT 2015 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
PREN 14420-7 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
BS ISO 4404-1 : 2001 AMD 16690 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
16/30322064 DC : DRAFT MAR 2016 BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
10/30196081 DC : 0 BS ISO 4404-1 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS
PREN 1341 : DRAFT 2009 SLABS OF NATURAL STONE FOR EXTERNAL PAVING - REQUIREMENTS AND TEST METHODS
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN 1652-1:1990-11 BRIGHT STEEL - GENERAL TECHNICAL DELIVERY CONDITIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
I.S. EN 13001-3-6:2018 CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
FD L00 025 : 2002 FD AEROSPACE INDUSTRY - NORMES AIR - REPLACEMENT
PREN 13852-1 : DRAFT 2011 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 1339 : DRAFT 2010 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
PREN 1338 : DRAFT 2010 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
EN 12480:2018 Gas meters - Rotary displacement gas meters
UNE-EN ISO 9934-2:2016 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
DIN EN 10085:2001-07 Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN ISO 9934-2:2015 Non-destructive testing. Magnetic particle testing Detection media
I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10087 : 1999-01 FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS
15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
BS EN 13204 : 2004 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
BS EN 1337-6:2004 Structural bearings Rocker bearings
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 10277-5:2008 Bright steel products. Technical delivery conditions Steels for quenching and tempering
BS EN 10083-1:2006 Steels for quenching and tempering General technical delivery conditions
BS EN 1065:1999 Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
BS EN 14420-4:2013 Hose fittings with clamp units Flange connections
BS EN 14420-6:2013 Hose fittings with clamp units TW tank truck couplings
BS EN 10085 : 2001-05 NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
UNI EN 10277-1 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
EN 13748-1:2004/A1:2005 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
EN 14420-4:2013 Hose fittings with clamp units - Part 4: Flange connections
EN 14420-7:2013 Hose fittings with clamp units - Part 7: Cam locking couplings
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
EN 14420-6:2013 Hose fittings with clamp units - Part 6: TW tank truck couplings
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
04/30125076 DC : 0 EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
10/30234613 DC : DRAFT NOV 2010 BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
DIN EN 1338:2003-08 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
DIN EN 10343:2009-07 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
DIN EN 1340:2003-08 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
06/30146728 DC : 0 EN 10277-2 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 2: STEELS FOR GENERAL ENGINEERING PURPOSES
DIN 1652-4:1990-11 BRIGHT STEEL MADE FROM STEEL FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS
PREN 14420-8 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
BS ISO 4404:1998 Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 10343:2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
16/30332882 DC : 0 BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 10083-1 E : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 1337-6 E : 2004 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
BS EN 14420-8 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
BS EN 1337-4:2004 Structural bearings Roller bearings
BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
BS EN ISO 4404-1:2012 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Water-containing fluids
PD ISO/TR 14799-1:2005 Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN 10277-1:2008 Bright steel products. Technical delivery conditions General
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
EN 1339:2003/AC:2006 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
EN 10087:1998 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
DIN EN 13411-6:2009-04 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN 10250-2:1999 Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 1065:1998 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 10277-5:2008 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
EN 12699:2015 Execution of special geotechnical works - Displacement piles
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
DIN EN 10111:2008-06 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 14420-8:2014 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
CR 10261 : 1995 ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
ISO 3887:2003 Steels Determination of depth of decarburization
EN 10021:2006 General technical delivery conditions for steel products
EN ISO 642:1999 Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
AS 1735.5.1:2019 Lifts, escalators and moving walks Safety of escalators and moving walks - Construction and installation (EN 115-1:2017, MOD)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10020:2000 Definition and classification of grades of steel
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
ISO 18265:2013 Metallic materials Conversion of hardness values

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.