• There are no items in your cart

EN 10208-1:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
Superseded date

11-01-2012

Published date

03-18-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification and designation
   5.1 Classification
   5.2 Designation
6 Information to be supplied by the purchaser
   6.1 Mandatory information
   6.2 Options
   6.3 Example of ordering
7 Manufacturing
   7.1 General
   7.2 Steelmaking
   7.3 Pipe manufacture
   7.4 Heat treatment condition
   7.5 Sizing
   7.6 Strip end welds
   7.7 Jointers
   7.8 General requirements for non-destructive
        testing
8 Requirements
   8.1 General
   8.2 Chemical composition
   8.3 Mechanical properties
   8.4 Weldability
   8.5 Appearance and soundness
   8.6 Dimensions, masses and tolerances
9 Inspection
   9.1 Types of inspection and inspection documents
   9.2 Summary of inspection and testing
   9.3 Selection and preparation of samples and test
        pieces
   9.4 Test methods
   9.5 Retests, sorting and reprocessing
10 Marking of the pipes
   10.1 General marking
   10.2 Special marking
11 Coating for temporary protection
Annex A (normative) - Specification of welded jointers
Annex B (normative) - Treatment of imperfections and
        defects disclosed by visual examination
Annex C (normative) - Non-destructive testing
Bibliography

This European Standard specifies the technical delivery conditions for seamless and welded steel pipes for the on land transport of combustible fluids primarily in gas supply systems but excluding pipeline applications in the petroleum and natural gas exploration and production industries. It includes less stringent quality and testing requirements than those in EN 10208-2.NOTE 1Steel pipes for pipeline transportation systems within the petroleum and natural gas exploration and production industries are covered by ISO 3183 [1]. This standard specifies products with the same (and additional) strength levels and partly similar (but not identical) requirements as EN 10208-1 and EN 10208-2 and is with two additional annexes specifying deviating or additional requirements also published as API Spec 5L [4].NOTE 2This European Standard does not apply to cast steel pipe.

Committee
CEN/TC 459/SC 10
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
09/30211880 DC : 0 BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
05/30128654 DC : DRAFT FEB 2005 EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
EN 10079:2007 Definition of steel products
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
PREN 12732 : DRAFT 2009 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 17885:2015 Plastics piping systems Mechanical fittings for pressure piping systems Specifications
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
13/30231511 DC : 0 BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 1775:2007-10 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 1775:2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
I.S. EN 10079:2007 DEFINITION OF STEEL PRODUCTS
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
13/30258750 DC : 0 BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
ISO 13577-3:2016 Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 10079 : 2007 DEFINITION OF STEEL PRODUCTS
UNI EN 1993-4-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
12/30255878 DC : 0 BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN 10079:2007 Definition of steel products
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
10/30227098 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
06/19977015 DC : DRAFT JULY 2006 BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES
PREN 12007-3 : DRAFT 2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 1775:2007 Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
DIN EN 10079:2007-06 Definition of steel products
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10246-17:2000 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN 10246-1:1996 Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 10256:2000 Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
API 5L : 2012 LINE PIPE
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN 10246-7:2005 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
EN 10021:2006 General technical delivery conditions for steel products
EN 10246-10:2000 Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004 Metallic products - Types of inspection documents
EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 10246-3:1999 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 8492:2013 Metallic materials Tube Flattening test
EN 10020:2000 Definition and classification of grades of steel
EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 10266:2003 Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN 10246-5 : 1999 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.