• There are no items in your cart

EN 10269:2013

Current
Current

The latest, up-to-date edition.

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Published date

10-23-2013

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and tolerances on dimensions
5 Calculation of mass
6 Classification and designation
7 Information to be supplied by the purchaser
8 Requirements
9 Inspection
10 Sampling
11 Test methods
12 Marking
Annex A (informative) - Reference data on some physical
        properties
Annex B (informative) - Guidance for heat treatment
Annex C (informative) - Reference data of strength values
        for 1% (plastic) creep strain and creep rupture
Annex D (informative) - Reference data for the relaxation
        properties
Annex E (informative) - Significant changes to the previous
        version EN 10269:1999
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 97/23/EC
Bibliography

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1.The requirements of this standard may be applied also to the finished fasteners.The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.NOTEOnce this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

Committee
CEN/TC 459/SC 7
DevelopmentNote
Supersedes PREN 10269. (10/2013)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
NS EN 10269 : 2013 Identical
UNE-EN 10269:2014 Identical
NF EN 10269 : 2013 Identical
DIN EN 10269:2014-02 Identical
BS EN 10269:2013 Identical
NBN EN 10269 : 2013 Identical
I.S. EN 10269:2013 Identical
NEN EN 10269 : 2013 Identical
UNI EN 10269 : 2013 Identical
PN EN 10269 : 2014 Identical
SN EN 10269 : 2013 Identical

03/319820 DC : DRAFT DEC 2003 EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
API 602 RUSSIAN : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
02/705734 DC : DRAFT MAY 2002 EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
01/715519 DC : DRAFT NOV 2001 PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
EN 13445-10:2015 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
UNE-EN 16767:2017 Industrial valves - Steel and cast iron check valves
I.S. EN ISO 898-2:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
08/30187521 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
14/30301577 DC : 0 BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
03/118014 DC : DRAFT DEC 2003 ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
BS EN 13480-2:2017 Metallic industrial piping Materials
DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
UNI EN 12516-2 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
10/30165716 DC : 0 BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
PD CEN/TR 13445-101:2015 Unfired pressure vessels. Example of application
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
11/30249108 DC : 0 BS EN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
BS EN 13445-10:2015 Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
UNE-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
NF EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 13445-10:2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN ISO 17292:2016-05 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
DIN EN 10302:2008-06 Creep resisting steels, nickel and cobalt alloys
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
UNE-EN 12516-2:2016 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
UNE-EN 593:2009 Industrial valves - Metallic butterfly valves
I.S. EN 12516-2:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
DIN EN 10088-1:2014-12 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN ISO 898-1:2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
I.S. EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
18/30351048 DC : 0 BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
BS ISO 7121:2016 Steel ball valves for general-purpose industrial applications
BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
15/30322555 DC : 0 BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS
DIN EN 16767 E : 2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
10/30165712 DC : 0 BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread
DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
UNE-EN 13445-10:2016 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
I.S. EN 16767:2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
UNE-EN ISO 898-2:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
BS EN 16668 : 2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
EN ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
I.S. EN ISO 15761:2003 STEEL GATE, GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER, FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN 10302 : 2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10088-1 : 2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
13/30287824 DC : 0 BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
99/707159 DC : DRAFT APR 99 BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
09/30188143 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
ISO 7121:2016 Steel ball valves for general-purpose industrial applications
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
API 602 REDLINE : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 13445-10:2016-05 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
08/30173031 DC : DRAFT JAN 2008 BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN 19207:2004-02 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
UNI EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
UNE-EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
BS EN 1515-3:2005 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated
BS EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
EN 16767:2016 Industrial valves - Steel and cast iron check valves
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
UNE-EN 12952-2:2012 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 1515-2:2001 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN ISO 15761:2002 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
BS EN 1515-1:2000 Flanges and their joints. Bolting Selection of bolting
BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
BS EN 12516-2:2014 Industrial valves. Shell design strength Calculation method for steel valve shells
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
EN 1515-1:1999 Flanges and their joints - Bolting - Part 1: Selection of bolting
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
EN 1515-3:2005 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
14/30299749 DC : 0 BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
DIN EN 16767:2016-08 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
11/30254165 DC : 0 BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN EN 13445-10 E : 2016 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
06/30151815 DC : 0 BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
S.R. CEN/TR 13445-101:2015 UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
PREN 10088-1 : DRAFT 2011 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
CEN/TR 13445-101:2015 Unfired pressure vessels - Example of application
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
DIN EN 1515-3 E : 2005 FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
DIN EN 12952-2:2011-10 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
UNE-EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN 10088-1:2014 Stainless steels List of stainless steels
BS EN 12952-2:2011 Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
BS EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
DIN EN 1515-3:2005-12 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated
DIN EN ISO 898-2:2012-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 10168:2004 Steel products - Inspection documents - List of information and description
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10108:2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
EN 10021:2006 General technical delivery conditions for steel products
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 10204:2004 Metallic products - Types of inspection documents
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
EN 10020:2000 Definition and classification of grades of steel
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.