EN 1097-5:2008
Current
Current
The latest, up-to-date edition.
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
Published date
03-12-2008
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Preparation of test portion
7 Procedure
8 Calculation and expression of results
9 Test report
Annex A (normative) - Variations to the determination
of the water content by drying
in a ventilated oven for use
with lightweight aggregates
Annex B (informative) - Example of calculation of the water
content by drying in a ventilated oven
Annex C (informative) - Precision
Bibliography
This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established.
| Committee |
CEN/TC 154
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 1097-5 : 2008 | Identical |
| NBN EN 1097-5 : 2008 | Identical |
| PN EN 1097-5 : 2008 | Identical |
| SN 670903-5B : 2008 | Identical |
| NS EN 1097-5 : 2ED 2008 | Identical |
| BS EN 1097-5:2008 | Identical |
| UNE-EN 1097-5:2009 | Identical |
| SN EN 1097-5 : 2008 | Identical |
| UNI EN 1097-5 : 2008 | Identical |
| DIN EN 1097-5:2008-06 | Identical |
| I.S. EN 1097-5:2008 | Identical |
| NEN EN 1097-5 : 2008 | Identical |
| BS EN 15564:2008 | Precast concrete products. Resin bound concrete. Requirements and test methods |
| DIN EN 1367-8 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| BS EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates |
| I.S. EN 13055-2:2004 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| BS EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates |
| PD CEN/TR 15310-4:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| 02/102929 DC : 0 | PREN 14440 - SLURRY SURFACING - FACTORY PRODUCTION CONTROL |
| DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 06/30155785 DC : 0 | BS EN 15564 - PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
| PREN 12697-32 : DRAFT 2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR |
| UNE-EN 1367-8:2015 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| 17/30366933 DC : 0 | BS EN 12697-32 - BITUMINOUS MIXTURES - TEST METHODS - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| PREN 13383-2 : DRAFT 2017 | ARMOURSTONE - PART 2: TEST METHODS |
| UNE-EN 14063-2:2015 | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products |
| UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 933-8:2015-07 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| DIN EN 13286-47:2012-07 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| DIN EN 13286-2:2013-02 | Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction (includes Corrigendum :2012) |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| DIN EN 13286-46:2003-07 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 46: TEST METHOD FOR THE DETERMINATION OF THE MOISTURE CONDITION VALUE |
| EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| I.S. EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
| I.S. EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| CEN/TR 15310-4 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 13055-1:2002/AC:2004 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| EN 13383-2:2013 | Armourstone - Part 2: Test methods |
| EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 13286-47 : 2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 47: TEST METHOD FOR THE DETERMINATION OF CALIFORNIA BEARING RATIO, IMMEDIATE BEARING INDEX AND LINEAR SWELLING |
| EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| I.S. EN 12274-5:2018 | SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE |
| DIN EN 15564 E : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| DIN EN 1367-7:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| PREN 12697-35 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| S.R. CEN TS 12390-10:2007 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE |
| 12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| 09/30195711 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-7 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| I.S. EN 1097-11:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| S.R. CWA 15846:2008 | MEASURING METHOD FOR DYNAMIC COMPACTNESS & BEARING CAPACITY WITH SP-LFWD (SMALL - PLATE LIGHT FALLING WEIGHT DEFLECTOMETER) |
| EN 13286-2:2010/AC:2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| BS EN 13286-1:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
| I.S. EN 13286-2:2010 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| I.S. EN 933-8:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| I.S. EN 13286-47:2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 47: TEST METHOD FOR THE DETERMINATION OF CALIFORNIA BEARING RATIO, IMMEDIATE BEARING INDEX AND LINEAR SWELLING |
| I.S. EN 12697-35:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| DIN EN 1367-8:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| DIN EN 1097-11 E : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| BS EN 13055:2016 | Lightweight aggregates |
| DIN EN 1097-11:2013-11 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| UNI EN 15564 : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| UNI EN 1097-11 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
| UNI EN 1367-8 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| DIN EN 14063-2:2013-10 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| DD CEN/TS 12390-10:2007 | Testing hardened concrete Determination of the relative carbonation resistance of concrete |
| I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| EN 12274-3:2018 | Slurry surfacing - Test methods - Part 3: Consistency |
| 13/30288546 DC : 0 | BS EN 12697-32 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR |
| DIN EN 1097-10:2014-09 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| UNE-EN 13286-2:2011 | Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction |
| BS EN 13383-2:2013 | Armourstone Test methods |
| UNE-EN 12697-35:2017 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| BS EN 13286-4:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer |
| UNE-EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 1097-10 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 13286-2 : 2010 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| UNI EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
| UNE-EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
| BS EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates |
| BS EN 14063-2:2013 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the installed products |
| 14/30310361 DC : 0 | BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| DIN EN 1367-7 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| PREN 14063-2 : DRAFT 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 15564:2009-05 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 15/30326284 DC : 0 | BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
| I.S. EN 12274-3:2018 | SLURRY SURFACING - TEST METHODS - PART 3: CONSISTENCY |
| I.S. CEN TR 15310-4:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| I.S. EN 15564:2008 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| BS EN 13286-2:2010 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Proctor compaction |
| BS EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| BS EN 13286-46:2003 | Unbound and hydraulically bound mixtures Test method for the determination of the moisture condition value |
| BS EN 933-8 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| EN 14063-1:2004/AC:2006 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| EN 14063-2:2013 | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products |
| EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
| EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
| EN 15564:2008 | Precast concrete products - Resin bound concrete - Requirements and test methods |
| UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| 17/30345777 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| 18/30368684 DC : 0 | BS EN 12697-55 - BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION |
| I.S. EN 1367-8:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| 12/30258114 DC : 0 | BS EN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| DIN EN 15732 E : 2013 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| UNI EN 14063-2 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| I.S. EN 14063-2:2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| UNE-EN 1367-7:2015 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
| I.S. EN 1367-7:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| PREN 12697-55 : DRAFT 2018 | BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION |
| EN 12274-5:2018 | Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance |
| BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
| BS EN 13286-47:2012 | Unbound and hydraulically bound mixtures Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| BS EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates Determination of water suction height |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 13286-5:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating table |
| UNE-EN 1097-10:2015 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
| EN 13055 : 2016 | LIGHTWEIGHT AGGREGATES |
| EN 13286-46:2003 | Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
| DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN EN 1097-10:2003-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| I.S. EN 1097-10:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
| EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| BS 812-109:1990 | Testing aggregates Methods for determination of moisture content |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| ISO 6783:1982 | Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method |
| EN 932-6:1999 | Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.