EN 12385-4:2002+A1:2008
Current
Current
The latest, up-to-date edition.
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
Published date
03-19-2008
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements and/or measures
6 Verification of safety requirements and/or measures
7 Information for use
Annex A (normative) - Calculation of minimum breaking force for
those ropes covered by Tables 5 to 17
Annex B (normative) - Summary of factors for calculations
Annex C (informative) - Calculation of approximate nominal length
mass of ropes over 60 mm diameter
Annex D (informative) - Information which should be provided with an
enquiry or an order
Annex ZA (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 2006/42/EC
Bibliography
This Part of this European Standard specifies the particular materials, manufacturing and testing requirements forropes for general lifting applications.The particular hazards covered by this Part are identified in Clause 4.This Part of this European Standard does not establish requirements for information for use other than those givenin clause 7 of Part 1. Neither does it cover the requirements for ropes fitted with terminations.Minimum breaking force values for the more common classes, sizes and grades of rope are provided in tables 5 to17.
| DevelopmentNote |
2002 Edition Re-Issued in March 2008 & incorporates AMD 1 2008. (04/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 12385-4 : 2002 + A1 2008 | Identical |
| PN EN 12385-4 : 2008 | Identical |
| NBN EN 12385-4 : 2002 + A1 2008 | Identical |
| UNE-EN 12385-4:2003 | Identical |
| DIN EN 12385-4:2008-06 | Identical |
| I.S. EN 12385-4:2002 | Identical |
| BS EN 12385-4 : 2002 | Identical |
| SN EN 12385-4 : 2003 + A1 2008 | Identical |
| UNE-EN 12385-4:2003+A1:2008 | Identical |
| NF EN 12385-4 : 2002 + A1 2008 | Identical |
| DIN EN 12385-4 : 2009-01 | Identical |
| NS EN 12385-4 : 2002 + A1 2008 | Identical |
| UNI EN 12385-4 : 2008 | Identical |
| BS EN 12385-4:2002+A1:2008 | Identical |
| BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
| I.S. EN 13411-8:2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING |
| IMCA M 194 : JAN 2014 | GUIDANCE ON WIRE ROPE INTEGRITY MANAGEMENT FOR VESSELS IN THE OFFSHORE INDUSTRY |
| DIN EN 13001-3-2 E : 2015 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 14/30298215 DC : 0 | BS EN 12604 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| CSA ISO 19901-6 : 2010 : R2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| 04/30111616 DC : 0 | EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| UNI EN 81-40 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| 04/30126149 DC : 0 | EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY |
| DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 81-41:2010 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| BS EN 50153 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| 13/30273889 DC : 0 | BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
| DIN EN 13411-3 E : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| DIN EN 13414-3 E : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| DIN EN 13411-1 E : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 280 : 2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
| BS EN 13414-3 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 14010:2004 | |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| DIN EN 13414-1:2009-02 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| EN 12195-4:2003 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| EN 13157:2004+A1:2009 | Cranes - Safety - Hand powered cranes |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
| DIN EN 13414-3:2009-02 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings (includes Corrigendum AC:2004 and Amendment A1:2008) |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| BS EN 81-41:2010 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| UNI EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| PREN 81-40 : DRAFT 2017 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| PREN 13411-4 : DRAFT 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| BS EN 13411-8:2011 | Terminations for steel wire ropes. Safety Swage terminals and swaging |
| PREN 13155 : DRAFT 2017 | CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS |
| UNE-EN 13411-8:2012 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
| I.S. EN 13001-3-2:2014 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| IMCA SEL 022 : JAN 2014 | GUIDANCE ON WIRE ROPE INTEGRITY MANAGEMENT FOR VESSELS IN THE OFFSHORE INDUSTRY |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| PREN 17206 : DRAFT 2018 | ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| 13/30277463 DC : 0 | BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES |
| DIN EN 81-40:2009-04 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| UNI CEN/TR 15728 : 2010 | DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 13157:2010-07 | Cranes - Safety - Hand powered cranes (includes Amendment A1:2009) |
| DIN EN 12195-4:2004-04 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 13414-1 : 2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 13414-1:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| I.S. EN 13411-3:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| I.S. EN 13414-3:2003 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| I.S. EN 12385-1:2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12604:2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| EN 12604:2017 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| I.S. EN 13411-1:2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| DIN EN 1993-1-11:2010-12 | Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components (includes Corrigendum AC:2009) |
| I.S. EN 13157:2004 | CRANES - SAFETY - HAND POWERED CRANES |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 13411-4:2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 280:2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| UNI EN 13411-4 : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| DIN EN 50153 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| VDE 0115-2 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| VDI 2358 : 2012 COR 2015 | WIRE ROPES FOR MECHANICAL HANDLING EQUIPMENT |
| UNI CEN/TS 13001-3-2 : 2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| PREN 360 : DRAFT 2016 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
| 12/30265273 DC : DRAFT OCT 2012 | BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| BS EN ISO 19901-6:2009 | Petroleum and natural gas industries. Specific requirements for offshore structures Marine operations |
| DIN EN 13001-3-2:2015-10 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 05/30076926 DC : DRAFT APR 2005 | EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS |
| DIN EN 13411-8:2011-12 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging; German version EN 13411-8:2011 |
| UNI EN ISO 19901-6 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| 14/30259005 DC : 0 | BS ISO 17746 - STEEL WIRE ROPE NET PANELS AND ROLLS - DEFINITIONS AND SPECIFICATIONS |
| PD CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| I.S. CEN TS 13001-3-2:2005 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| UNE-EN 13001-3-2:2015 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| UNE-EN 1993-1-11:2015 | Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components |
| I.S. EN 81-41:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| NF EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 81-40:2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| 17/30364300 DC : 0 | BS EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| UNE-EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| I.S. EN 50153:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| DIN EN 13411-4 E : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN 13411-1 : 2002 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| EN 81-40:2008 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| UNI EN 13414-3 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS |
| UNI EN 13157 : 2009 | CRANES - SAFETY - HAND POWERED CRANES |
| UNI EN 13414-1 : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| UNI EN 1993-1-11 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 13411-1 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| 04/30113996 DC : 0 | PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 14/30282703 DC : 0 | BS ISO 29400 - SHIPS AND MARINE TECHNOLOGY - OFFSHORE WIND ENERGY - PORTS AND MARINE OPERATIONS |
| BS ISO 29400:2015 | Ships and marine technology. Offshore wind energy. Port and marine operations |
| UNI EN 13411-3 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| UNE-EN 81-41:2011 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| 09/30198357 DC : 0 | BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
| DIN EN 81-41:2016-06 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| DIN EN 13411-8 E : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING |
| BS EN 13001-3-2:2014 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| NF EN 81-31 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| API RP 2MOP : 2010 | MARINE OPERATIONS |
| CSA ISO 19901-6 : 2010 : INC : COR 1 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| API 2MOP : 2010 : INC : ERR 1 : 2015 | MARINE OPERATIONS |
| S.R. CEN/TR 15728:2016 | DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| ISO 29400:2015 | Ships and marine technology Offshore wind energy Port and marine operations |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 280:2014 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| EN ISO 19901-6:2009/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS (ISO 19901-6:2009/COR 1:2011) |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| DIN EN 280:2016-04 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015) |
| DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| BS EN 13157 : 2004 | CRANES - SAFETY - HAND POWERED CRANES |
| UNE-EN 12604:2018 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods |
| BS EN 13411-4:2011 | Terminations for steel wire ropes. Safety Metal and resin socketing |
| BS EN 14010 : 2003 | |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| BS EN 12195-4:2003 | Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| DIN EN 13411-3:2011-04 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing (includes Amendment A1:2008) |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN 1993-1-11:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 1993-1-11:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS (INCLUDING IRISH NATIONAL ANNEX) |
| 18/30366946 DC : 0 | BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| UNI EN 13411-8 : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING |
| BS EN 81-40:2008 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| PREN 12604 : DRAFT 2014 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 13001-3-2:2004 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| API 2MOP : 2010 : R2015 | MARINE OPERATIONS |
| CSA ISO 19901-6 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| S.R. CEN TS 13001-3-2:2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| 17/30360261 DC : 0 | BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| 16/30332882 DC : 0 | BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
| PREN 16517 : DRAFT 2017 | AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
| I.S. EN ISO 19901-6:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS (ISO 19901-6:2009) |
| DIN EN 13414-1 E : 2009 | STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE |
| BS EN 1993-1-11:2006 | Eurocode 3. Design of steel structures Design of structures with tension components |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| BS EN 12385-1 : 2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 13411-3 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| DIN EN 13411-4:2011-06 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| DIN EN 81-41:2011-09 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| EN 13414-3:2003+A1:2008 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| DIN EN 13411-1:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS |
| EN 13411-8:2011 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| ISO 4345:1988 | Steel wire ropes — Fibre main cores — Specification |
| ISO 4346:1977 | Steel wire ropes for general purposes — Lubricants — Basic requirements |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 10264-2:2012 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.