EN 1253-1:2015
Current
Current
The latest, up-to-date edition.
GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM
Published date
01-21-2015
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Allocation and sequence of tests
7 Marking
8 Evaluation of conformity
Annex A (normative) - Sequence of the tests
Annex B (informative) - A-deviation
Bibliography
Describes floor gullies for use inside buildings, gives guidance for places of installation and specifies requirements for the construction, design, performance and marking of factory made gullies for buildings, irrespective of the material, for use in drainage systems requiring a trap with a depth of water seal of at least 50 mm (further: floor gullies).
| Committee |
CEN/TC 165
|
| DevelopmentNote |
Supersedes PREN 1253-1. (02/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 1253-1:2015 | Identical |
| SN EN 1253-1 : 2015 | Identical |
| NF EN 1253-1 : 2015 | Identical |
| DIN EN 1253-1:2015-03 | Identical |
| UNE-EN 1253-1:2015 | Identical |
| NS EN 1253-1 : 2015 | Identical |
| BS EN 1253-1:2015 | Identical |
| SANS 51253-1 : 1ED 2010 | Identical |
| I.S. EN 1253-1:2015 | Identical |
| UNI EN 1253-1 : 2004 | Identical |
| NBN EN 1253-1 : 2015 | Identical |
| PN EN 1253-1 : 2015 | Identical |
| NEN EN 1253-1 : 2015 | Identical |
| PREN 1253-5 : DRAFT 2015 | GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| 15/30326961 DC : 0 | BS EN 62561-5 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS |
| 04/30055611 DC : 0 | BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| I.S. EN 62561-5:2017 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS |
| DIN EN 1253-5:2015-09 (Draft) | GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| DIN EN 1253-3:2016-09 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| BS EN 13564-1:2002 | Anti-flooding devices for buildings Requirements |
| BS EN 1253-2:2015 | Gullies for buildings Roof drains and floor gullies without trap |
| EN 1253-5:2017 | Gullies for buildings - Part 5: Gullies with light liquids closure |
| EN 1253-2:2015 | GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP |
| EN 62561-5:2017 | Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals |
| 10/30217319 DC : 0 | BS EN 13598-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| IEC 62561-5:2011 | Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| NF EN 13598-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| I.S. EN 1253-2:2015 | GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP |
| DIN EN 1253-5:2017-05 | GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| I.S. EN 1253-5:2017 | GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| I.S. EN 1253-4:2016 | GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS |
| 11/30250267 DC : 0 | BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| 12/30265301 DC : 0 | BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| 15/30326216 DC : 0 | BS EN 1253-5 - GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE |
| 07/30166095 DC : 0 | EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| BS EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for ancillary fittings including shallow inspection chambers |
| I.S. EN 13598-1:2010 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| UNI EN 13598-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VILYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| DIN 1986-3:2004-11 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 3: SPECIFICATIONS FOR SERVICE AND MAINTENANCE |
| DIN 18195-9:2010-05 | WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS |
| UNE-EN 1253-3:2017 | Gullies for buildings - Part 3: Evaluation of conformity |
| BS EN 1253-5:2017 | Gullies for buildings Gullies with light liquids closure |
| UNE-EN 1253-4:2017 | Gullies for buildings - Part 4: Access covers |
| DIN EN 13598-1:2011-02 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| UNE-EN 13598-1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| CEI EN 62561-5 : 2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS |
| BS EN 62561-5:2017 | Lightning protection system components (LPSC) Requirements for earth electrode inspection housings and earth electrode seals |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| DIN EN 1253-2:2015-03 | GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP |
| DIN EN 1253-4:2016-07 | GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS |
| DIN EN 13598-1 E : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| BS EN 1253-4:2016 | Gullies for buildings Access covers |
| EN 13564-1:2002 | Anti-flooding devices for buildings - Part 1: Requirements |
| EN 1253-4:2016 | Gullies for buildings - Part 4: Access covers |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 1433:2002/A1:2005 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 1253-3:2016 | Gullies for buildings - Part 3: Evaluation of conformity |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.