EN 12599:2012
Current
Current
The latest, up-to-date edition.
Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems
Published date
10-17-2012
Publisher
Foreword
1 Scope
2 Normative references
3 Test and check procedure
4 Completeness checks
5 Functional checks
6 Functional measurements
7 Special measurements
8 Uncertainty of measurements
9 Test Reports
Annex A (informative) - Completeness check
Annex B (informative) - Functional checks
Annex C (normative) - Determination of the extent
of functional checks or measurements
Annex D (normative) - Measuring methods and
measuring devices for functional
measurements
Annex E (normative) - Special measurements
Annex F (informative) - Contractual agreements
Annex G (informative) - Examples for determination
of the number of functional checks and
measurements
Annex H (informative) - Examples for measurement
uncertainty
Annex I (informative) - Examples of measuring
protocols for the air-flow rate
Bibliography
This European Standard specifies checks, test methods and measuring instruments in order to verify the fitness for purpose of the installed systems primarily for handing over which will be partially performed before, during and after handing over.This European Standard enables the choice between simple test methods, when sufficient, and extensive measurements, when necessary.This European Standard applies to mechanically operated ventilation and air conditioning systems as specified in EN 12792 and comprising any of the following:-air terminal devices and units,-air handling units,-air distribution systems (supply, extract, exhaust),-fire protection devices,-automatic control devices.When the system is set, adjusted and balanced measurement methods described in this European Standard apply.This European Standard does not apply to:-heat generating systems and their control,-refrigerating systems and their control,-distribution of heating and cooling medium to the air handling units,-compressed air supplying systems,-water conditioning systems,-central steam generating systems for air humidifying,-electric supply systems.This European Standard applies to ventilation and air conditioning systems designed for the maintenance of comfort conditions in buildings. It is not applicable in the case of systems for the control of industrial or other special process environments. In the latter case, however, it may be referred to if the system technology is similar to that of the above mentioned ventilation and air conditioning systems.This European Standard does not include any requirements concerning the installation contract. However, in order to facilitate the application of this standard, the installation contract should refer to the provisions which are listed in Annex F.The measuring methods in this European Standard can be used in the frame of the energy inspection of air-conditioning systems according to EU Directive 2010/31/EU "Energy performance of buildings Directive" (see EN 15239, EN 15240).This European Standard may be used for residential and dwelling ventilation systems.
| Committee |
CEN/TC 156
|
| DevelopmentNote |
Supersedes PREN 12599. (11/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 12599:2014 | Identical |
| NEN EN 12599 : 2012 | Identical |
| NS EN 12599 : 2012 | Identical |
| I.S. EN 12599:2012 | Identical |
| PN EN 12599 : 2013 | Identical |
| UNI EN 12599 : 2012 | Identical |
| SN EN 12599 : 2012 | Identical |
| UNE-EN 12599:2001 | Identical |
| DIN EN 12599:2013-01 | Identical |
| NF EN 12599 : 2012 | Identical |
| BS EN 12599:2012 | Identical |
| NBN EN 12599 : 2012 | Identical |
| 15/30313954 DC : 0 | BS ISO 16813 - BUILDING ENVIRONMENT DESIGN - INDOOR ENVIRONMENT - GENERAL PRINCIPLES |
| DIN EN 15726 E : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| 14/30303741 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| DIN EN 15251 E : 2012 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| DIN EN 15239:2007-08 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| BS EN 16211:2015 | Ventilation for buildings. Measurement of air flows on site. Methods |
| DIN EN 15239 E : 2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| UNI EN 15780 : 2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| DIN EN 15780 E : 2012 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| PREN 16282-1 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| BS EN 14134:2004 | Ventilation for buildings. Performance testing and installation checks of residential ventilation systems |
| UNI EN 1507 : 2008 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS WITH RECTANGULAR SECTION - REQUIREMENTS FOR STRENGTH AND LEAKAGE |
| EN 16798-3:2017 | Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4) |
| I.S. EN ISO 14644-3:2006 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| BS EN 1507:2006 | Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage |
| EN 13182:2002/AC:2002 | VENTILATION FOR BUILDINGS - INSTRUMENTATION REQUIREMENTS FOR AIR VELOCITY MEASUREMENTS IN VENTILATED SPACES |
| VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
| 05/30131726 DC : DRAFT APR 2005 | ISO/DIS 16813 - BUILDING ENVIRONMENT DESIGN - INDOOR ENVIRONMENT - GENERAL PRINCIPLES |
| 15/30297468 DC : 0 | BS EN 16798-3 - ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| EN 16798-17:2017 | Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| BS EN 16798-17:2017 | Energy performance of buildings. Ventilation for buildings Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7- 11) |
| 14/30289271 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| BS EN 15239:2007 | Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of ventilation systems |
| 05/30128665 DC : 0 | PREN 15239 - VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| PREN 13053 : DRAFT 2017 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| I.S. EN 15726:2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| UNE-EN 15726:2012 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| S.R. CEN/TR 16798-18:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS PART 18: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-17 - GUIDELINES FOR INSPECTION OF VENTILATION AND AIR-CONDITIONING SYSTEMS (MODULES M4-11, M5-11, M6-11, M7-11) |
| I.S. TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| EN 16282-1:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method |
| ISO 16813:2006 | Building environment design Indoor environment General principles |
| DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| VDI 2082:2010-07 | Air-conditioning - Sales outlets (VDI ventilation code of practice) |
| VDI 3985:2004-03 | Principles for the design, construction and acceptance of combined heat and power plants with internal combustion engines |
| VDI 2052 Blatt 1:2017-04 | Air conditioning - Kitchens (VDI Ventilation Code of Practice) |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| VDI 6041:2017-07 | Facility management - Technical monitoring of buildings and building services |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| VDI 3035:2008-05 | Design of machine tools, production lines and peripheral equipment for the use of metalworking fluids |
| VDI 3810 Blatt 4:2013-12 | Operating and maintenance of buildings and building installations - Ventilating and air-conditioning installations |
| VDI 2081 Blatt 2:2005-05 | Noise generation and noise reduction in air-conditioning systems - Examples |
| VDI 2083 Blatt 2:2015-04 | Cleanroom technology - Stipulations regarding the checking and monitoring of continued compliance with specifications |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
| VDI 6022 Blatt 7.1:2013-10 | Ventilation and indoor-air quality - Branch-specific guides - Waste treatment plants |
| VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
| VDI 6031:2006-03 | Acceptance test of cooling surfaces for rooms |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
| VDI 2087 : 2006 COR 2008 | Air ducts - Operating and construction fundamentals - Corrigendum concerning guideline VDI 2087:2006-12 |
| VDI 2083 Blatt 3:2005-07 | Cleanroom technology - Metrology and test methods |
| VDI 6039:2011-06 | Facility management - Managing of building commissioning - Methods and procedures for building-services installations |
| VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
| VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
| VDI 2164:2016-12 | PCM energy storage systems in building services |
| VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
| UNE-EN 16211:2016 | Ventilation for buildings - Measurement of air flows on site - Methods |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| 16/30326493 DC : 0 | BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| PD CEN/TR 16798-18:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-17. Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) |
| CLC/TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| DIN EN 16798-3 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| 07/30167162 DC : 0 | BS EN 15726 - VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIRCONDITIONED/ VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| BS ISO 17772-1:2017 | Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| UNI EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| 15/30297473 DC : 0 | BS EN 16798-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6 |
| I.S. EN 16282-1:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| I.S. EN 14134:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| UNE-EN 15780:2012 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| I.S. EN 15780:2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| I.S. EN 15759-2:2018 | CONSERVATION OF CULTURAL HERITAGE - INDOOR CLIMATE - PART 2: VENTILATION MANAGEMENT FOR THE PROTECTION OF CULTURAL HERITAGE BUILDINGS AND COLLECTIONS |
| NF EN 15780 : 2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| EN 15759-2:2018 | Conservation of cultural heritage - Indoor climate - Part 2: Ventilation management for the protection of cultural heritage buildings and collections |
| EN 14134:2004 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| DIN EN ISO 14644-3:2006-03 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 15726:2011-12 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions; German version EN 15726:2011 |
| BS EN 15780:2011 | Ventilation for buildings. Ductwork. Cleanliness of ventilation systems |
| BS EN 15726:2011 | Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| 15/30297476 DC : 0 | BS EN 16798-17 - ENERGY PERFORMANCE OF BUILDINGS - PART 17: VENTILATION FOR BUILDINGS - MODULE M4-11, M5-11, M6-11, M7-11 - GUIDELINES FOR INSPECTION OF VENTILATION AND AIR CONDITIONING SYSTEMS |
| BS EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN EN 16798-3:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| 05/30128648 DC : 0 | EN 15240 - VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF AIRCONDITIONING SYSTEMS |
| DIN EN 16211:2015-09 | Ventilation for buildings - Measurement of air flows on site - Methods |
| BS EN 16282-1:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens General requirements including calculation method |
| NF EN 15726 : 2011 | VENTILATION FOR BUILDINGS - AIR DIFFUSION - MEASUREMENTS IN THE OCCUPIED ZONE OF AIR-CONDITIONED/VENTILATED ROOMS TO EVALUATE THERMAL AND ACOUSTIC CONDITIONS |
| I.S. EN 16798-17:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 17: GUIDELINES FOR INSPECTION OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULE M4-11, M5-11, M6-11, M7-11) |
| I.S. EN 15239:2007 | VENTILATION FOR BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - GUIDELINES FOR INSPECTION OF VENTILATION SYSTEMS |
| CEN/TR 16798-18:2017 | Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) |
| 17/30339487 DC : 0 | BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| BS EN ISO 14644-3:2005 | Cleanrooms and associated controlled environments Test methods |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| BS EN 13182:2002 | Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces |
| DIN EN 14134:2004-04 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| EN 16211:2015 | Ventilation for buildings - Measurement of air flows on site - Methods |
| EN 15726:2011 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 15780:2011 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN ISO 14644-3:2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| 05/30128661 DC : 0 | EN 13779 - VENTILATION FOR NON RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| CEI CLC/TR 50090-9-2 : 2009 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| 10/30240340 DC : 0 | BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| 11/30244192 DC : 0 | BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD |
| ISO 17772-1:2017 | Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings |
| DIN EN 15780:2012-01 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| I.S. EN 16211:2015 | VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| DIN EN 16798-17 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 17: GUIDELINES FOR INSPECTION OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULE M4-11, M5-11, M6-11, M7-11) |
| I.S. EN 16798-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| I.S. EN 15251:2007 | INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 16798-17:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 17: GUIDELINES FOR INSPECTION OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULE M4-11, M5-11, M6-11, M7-11) |
| EN 14239:2004 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 12238:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
| EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 15780:2011 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| ISO 12569:2017 | Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN 15726:2011 | Ventilation for buildings - Air diffusion - Measurements in the occupied zone of air-conditioned/ventilated rooms to evaluate thermal and acoustic conditions |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| CR 1752:1998 | Ventilation for buildings - Design criteria for the indoor environment |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| ENV 1631 : 1996 | CLEANROOM TECHNOLOGY - DESIGN, CONSTRUCTION AND OPERATION OF CLEANROOMS AND CLEAR AIR DEVICES |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN ISO 3740:2000 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| EN 13182:2002/AC:2002 | VENTILATION FOR BUILDINGS - INSTRUMENTATION REQUIREMENTS FOR AIR VELOCITY MEASUREMENTS IN VENTILATED SPACES |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN ISO 12569:2017 | Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.