• There are no items in your cart

EN 12953-12:2003

Current
Current

The latest, up-to-date edition.

Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
Published date

09-17-2003

Foreword
1 Scope
   1.1 Firing systems
   1.2 Fuels
   1.3 Operational equipment
2 Normative references
3 Terms and definitions
4 Fuel bunkers with conveying plant
   4.1 General
   4.2 Conveying plant
   4.3 Fuel bunkers
   4.4 Fuel bins
5 Fuel treatment
   5.1 General
   5.2 Size reduction of the fuel
   5.3 Drying of the fuel
6 Fuel feeding
7 Explosion prevention measures
8 Equipment for combustion air supply and flue gas discharge
   8.1 Air supply
   8.2 Combustion air/fuel ratio
   8.3 Flue gas discharge
9 Firing system
   9.1 General
   9.2 Control and monitoring
   9.3 Electrical equipment
   9.4 Safety precautions
        9.4.1 General
        9.4.2 Purging of the flue gas passes
        9.4.3 Lightning-up
        9.4.4 Start-up
        9.4.5 Shutting down
   9.5 Common stack for several firing systems
10 Ash handling and extraction
11 Operation and maintenance
   11.1 General
   11.2 Operating instructions
Annex A (informative) Operational requirements for permanently
         supervised firing systems for solid fuels on grate
         firing systems
Annex ZA (informative) Relationship between this European
         Standard and Essential Requirements of EU Directive
         97/23/EC
Bibliography

This part of this European Standard specifies the requirements for internal or external grate firing systems commencing at the fuel bunkers and ending at the ash extraction plant. For combination of various firing systems, the individual requirements of each system also apply.If several fuels are burnt simultaneously or if a fuel quality varies considerably (e.g. moisture content), additional safety measures can be necessary, especially with respect to limitation of the fuel flow into the firing system and ensuring proper air supply to the individual fuels.

Committee
CEN/TC 269
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

UNE-EN 12953-6:2012 Shell Boilers - Part 6: Requirements for equipment for the boiler
I.S. EN 50156-1:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 12953-6:2011 SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 12953-6 : 2011 SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
BS EN 12953-6:2011 Shell boilers Requirements for equipment for the boiler
BS EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
12/30260546 DC : 0 BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
08/30190311 DC : 0 BS EN 12953-6 - SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
DIN EN 12953-6:2011-05 Shell boilers - Part 6: Requirements for equipment for the boiler
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler

PREN 50156-1 : DRAFT 2012 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
EN 12953-7:2002 Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
ISO 6184-1:1985 Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air
EN 12952-8:2002 Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
EN 12952-9:2002 Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 26184-1 : 1991 EXPLOSION PROTECTION SYSTEMS - DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.