EN 12953-7:2002
Current
Current
The latest, up-to-date edition.
Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
Published date
05-22-2002
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Fuel supply
4.1 Fuel transfer and preparation
4.2 Fuel lines
4.3 Safety shut-off devices (Safety trip valves)
5 Air supply, air/fuel ratio
6 Firing system
6.1 Burners
6.2 Inspection openings
6.3 Purging, start-up and shutdown
6.4 Common stack for several firing systems
6.5 Fuels
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
These requirements apply to oil and gas firing systems of steam and hot water generators. For multifuel firing systems using separate or combined burners these requirements shall apply to the oil and/or gas firing part involved. Where several fuels are burnt simultaneously, improved safety measures may be necessary, especially in respect to limitation of heat input into the firing system and proper air supply to the individual fuels.
| Committee |
CEN/TC 269
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 12953-7:2002-08 | Identical |
| UNI EN 12953-7 : 2004 | Identical |
| NEN EN 12953-7 : 2002 | Identical |
| NF EN 12953-7 : 2002 | Identical |
| SN EN 12953-7 : 2002 | Identical |
| UNE-EN 12953-7:2003 | Identical |
| BS EN 12953-7:2002 | Identical |
| PN EN 12953-7 : 2004 | Identical |
| NS EN 12953-7 : 1ED 2002 | Identical |
| I.S. EN 12953-7:2002 | Identical |
| NBN EN 12953-7 : 2002 | Identical |
| S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
| UNE-EN 12953-1:2013 | Shell boilers - Part 1: General |
| UNE-EN 12953-6:2012 | Shell Boilers - Part 6: Requirements for equipment for the boiler |
| EN 12953-1:2012 | Shell boilers - Part 1: General |
| EN 12953-12:2003 | Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler |
| CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
| I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| DIN EN 12953-12:2004-01 | Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler; German version EN 12953-12:2003 |
| I.S. EN 12953-6:2011 | SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER |
| I.S. EN 12953-1:2012 | SHELL BOILERS - PART 1: GENERAL |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
| DIN EN 14394 E : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 12953-6 : 2011 | SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER |
| UNI EN 12953-1 : 2012 | SHELL BOILERS - PART 1: GENERAL |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 12953-1:2012 | Shell boilers General |
| BS EN 12953-6:2011 | Shell boilers Requirements for equipment for the boiler |
| BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| 08/30190311 DC : 0 | BS EN 12953-6 - SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER |
| 10/30216702 DC : 0 | BS EN 12953-1 - SHELL BOILERS - PART 1: GENERAL |
| DIN EN 12953-6:2011-05 | Shell boilers - Part 6: Requirements for equipment for the boiler |
| DIN EN 12953-1:2012-05 | Shell boilers - Part 1: General |
| BS EN 12953-12:2003 | Shell boilers Requirements for grate firing systems for solid fuels for the boiler |
| EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| EN 12953-6:2011 | Shell Boilers - Part 6: Requirements for equipment for the boiler |
| EN 676:2003+A2:2008/AC:2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 751-3:1996/AC:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
| EN 264 : 1991 | SAFETY SHUT OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| EN 293:1992 | Oil pressure atomizing nozzles - Minimum requirements - Testing |
| EN 225 : 1987 | ATOMIZING OIL BURNERS - PUMPS WITH ROTATING SHAFT & EXTERNAL DRIVE - DIMENSIONS |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| PREN 50156-1 : DRAFT 2012 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| EN 1044 : 1999 | BRAZING - FILLER METALS |
| EN 12953-1:2012 | Shell boilers - Part 1: General |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 3677:2016 | Filler metal for soldering and brazing — Designation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 521:2006 | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
| EN 230:2005 | Automatic burner control systems for oil burners |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 88:1991/A1:1996 | PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR |
| EN 226:1987/AC1:1987 | Atomizing oil burners - Connecting dimensions between burners and heat generators |
| EN 299:2009 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| PREN 298 : DRAFT 2010 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.