EN 13034:2005+A1:2009
Current
The latest, up-to-date edition.
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
05-06-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance requirements for materials, seams joins and
assemblages
4.1 Materials
4.2 Seams, joins and assemblages
5 Performance requirements for a whole suit
5.1 General
5.2 Resistance to penetration by liquids in the form of
a light spray (mist test)
6 Marking
7 Information supplied by the manufacturer
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 89/686/EEC Personal
Protective Equipment
Bibliography
This document specifies the minimum requirements for limited use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at the molecular level) is not required.This document covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]).Chemical protective suits (Type 6) cover and protect at least the trunk and the limbs, e.g. one-piece coveralls or two piece suits, with or without hood, boot-socks or boot-covers. This document specifies minimum requirements for the connections between different parts of Type 6 suits by the use of a reduced whole suit spray test using a variant of EN 468, as described in 5.2.Partial body protection of similar limited performance (Type PB [6]) covers and protects only specific parts of the body, e.g. coats, aprons, sleeves etc. They should not be tested to the whole suit test (5.2).
| Committee |
CEN/TC 162
|
| DevelopmentNote |
2005 Edition Re-Issued in May 2009 & incorporates AMD 1 2009. (06/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 13034 : 2005 + A1 2009 | Identical |
| UNI EN 13034 : 2009 | Identical |
| DIN EN 13034:2009-08 | Identical |
| SN EN 13034 : 2005 + A1 2009 | Identical |
| NBN EN 13034 : 2005 + A1 2009 | Identical |
| PN EN 13034 : 2007 + A1 2010 | Identical |
| NEN EN 13034 : 2005 + A1 2009 | Identical |
| BS EN 13034 : 2005 | Identical |
| I.S. EN 13034:2005 | Identical |
| BS EN 13034:2005+A1:2009 | Identical |
| NF EN 13034 : 2005 + A1 2009 | Identical |
| UNE-EN 13034:2005 | Identical |
| UNE-EN 13034:2005+A1:2009 | Identical |
| DIN EN ISO 17491-4:2016-09 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008 + AMD. 1:2016) |
| BS EN 14605 : 2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| BS EN ISO 17491-4 : 2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008) |
| S.R. CEN TR 15419:2006 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
| CEN/TR 15419:2017 | Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing |
| BS EN 12312-6:2017 | Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment |
| I.S. EN 12312-6:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT |
| UNI EN 14605 : 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| 06/30150361 DC : 0 | EN ISO 17491-4 - PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) |
| PD CEN/TR 15419:2017 | Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing |
| UNE-EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| DIN EN 14605 E : 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| I.S. EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| ISO 17491-4:2008 | Protective clothing Test methods for clothing providing protection against chemicals Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
| EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| EN ISO 17491-4:2008/A1:2016 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016) |
| S.R. CEN/TR 15419:2017 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| I.S. EN ISO 17491-4:2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008) |
| DIN EN 14605:2009-08 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| EN ISO 17491-4:2008/A1:2016 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016) |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| EN 14325:2004 | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
| EN 12941:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN 31092:1993/A1:2012 | TEXTILES - DETERMINATION OF PHYSIOLOGICAL PROPERTIES - MEASUREMENT OF THERMAL AND WATER-VAPOUR RESISTANCE UNDER STEADY-STATE CONDITIONS (SWEATING GUARDED - HOTPLATE TEST) (ISO 11092:1993/AMD 1:2012) |
| EN 340:2003 | Protective clothing - General requirements |
| EN 23758 : 1993 | TEXTILES - CARE LABELLING CODE USING SYMBOLS |
| ISO 17491-4:2008 | Protective clothing Test methods for clothing providing protection against chemicals Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.