EN 1320:1996
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Destructive tests on welds in metallic materials - Fracture test
Superseded date
08-01-2013
Published date
10-23-1996
Publisher
Foreword
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Denominations and symbols
6 Dimensions of test pieces
7 Removal of test specimens
8 Test procedure
9 Test result
10 Rest report
Annex
A (informative) Test report
This European Standard specifies the sizes of test specimen and the procedures for carrying out fracture tests in order to obtain information about types, sizes and distribution of internal imperfections such as porosities, cracks, lacks of fusion, lacks of penetration and solid inclusions on the fracture surface. This European Standard applies to metallic materials in all form of product with joints made by any fusion welding process with a thickness greater or equal to 2 mm. This European Standard is used if required by the application standard or by the agreement between the contracting parties.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 1320 : 1ED 1997 | Identical |
| I.S. EN 1320:1997 | Identical |
| NF EN 1320 : 1996 | Identical |
| NEN EN 1320 : 1997 | Identical |
| DIN EN 1320:1996-12 | Identical |
| UNE-EN 1320:1997 | Identical |
| PN EN 1320 : 1999 | Identical |
| SN EN 1320 : 1997 | Identical |
| BS EN 1320:1997 | Identical |
| UNI EN 1320 : 1997 | Identical |
| NBN EN 1320 : 1996 | Identical |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 287-1:2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| 05/30133040 DC : DRAFT APR 2005 | BS EN 1866 - MOBILE FIRE EXTINGUISHERS |
| 12/30266853 DC : 0 | BS EN 1866-2 - MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| DIN EN ISO 9606-4:1999-06 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS |
| BS EN 287-2:1992 | Approval testing of welders for fusion welding Aluminium and aluminium alloys |
| BS EN ISO 9606-4:1999 | Approval testing of welders. Fusion welding Nickel and nickel alloys |
| ISO 9606-5:2000 | Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
| DIN 8561-12:1995-10 (Draft) | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 12: TITANIUM AND TITANIUM ALLOYS |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 00/716910 DC : DRAFT NOV 2000 | BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| 13/30263186 DC : 0 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| UNI EN 3-8 : 2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| BS EN ISO 9606-5:2000 | Approval testing of welders. Fusion welding Titanium and titanium alloys, zirconium and zirconium alloys |
| BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| DIN EN 1866:1998-11 | MOBILE FIRE EXTINGUISHERS |
| DIN EN 1866:2006-03 | MOBILE FIRE EXTINGUISHERS |
| NF EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| PREN 287-1 : DRAFT 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DIN EN 287-6:2016-03 (Draft) | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| DIN EN 287-1:2011-11 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DIN EN 3-8:2015-07 (Draft) | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| BS EN ISO 9606-3:1999 | Approval testing of welders. Fusion welding Copper and copper alloys |
| BS EN 1866:2005 | Mobile fire extinguishers |
| UNE-EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| UNI EN ISO 9606-2 : 2006 | Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys |
| I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| UNI EN 287-1 : 2012 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| UNI EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| 03/115441 DC : DRAFT OCT 2003 | BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS |
| EN 3-8:2006/AC:2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding Aluminium and aluminium alloys |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
| ISO 15618-2:2001 | Qualification testing of welders for underwater welding Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| ISO 9606-4:1999 | Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
| ISO 9606-3:1999 | Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| UNE-EN ISO 9606-4:1999 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS (ISO 9606-4:1999) |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 9606-4:1999 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN 1866:2005 | Mobile fire extinguishers |
| EN ISO 9606-5:2000 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 9606-3 : 1999 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| I.S. EN 1866:2006 | MOBILE FIRE EXTINGUISHERS |
| 10/30235392 DC : 0 | BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| PREN ISO 15614-6 : DRAFT 2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS |
| I.S. EN ISO 9606-2:2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| 06/30100042 DC : DRAFT APR 2006 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION - RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 3-8:2006 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| DIN EN ISO 9606-5:2000-04 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 5: TITANIUM AND TITANIUM ALLOYS, ZIRCONIUM AND ZIRCONIUM ALLOYS |
| DIN EN ISO 9606-2:2005-03 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004 |
| DIN EN ISO 9606-3:1999-06 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 3: COPPER AND COPPER ALLOYS |
| DIN EN ISO 15618-2 E : 2002 | APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| DIN EN ISO 15618-2:2002-04 | APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING |
| DIN EN 287-1:2004-05 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| EN 30042 : 1994 | ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
| EN 25817 : 1992 | ARC WELDED JOINTS IN STEEL - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.