• There are no items in your cart

EN 1366-8:2004

Current
Current

The latest, up-to-date edition.

Fire resistance tests for service installations - Part 8: Smoke extraction ducts
Published date

07-28-2004

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test equipment
   4.1 General
   4.2 Furnace
   4.3 Perforated plate
   4.4 Inlet nozzles
   4.5 Ambient temperature leakage measuring device
   4.6 Pressure sensors for differential pressure control
   4.7 Welded connecting tube
   4.8 Extraction fan connecting duct
   4.9 Extraction fan
   4.10 Thermocouples
   4.11 Surface thermocouples
   4.12 Oxygen measuring equipment
   4.13 Restraining equipment
   4.14 Observation window
5 Test conditions
6 Test specimen
   6.1 Size
   6.2 Number
   6.3 Design
7 Installation of test specimen
   7.1 General
   7.2 Standard supporting construction
   7.3 Duct arrangement
   7.4 Restraint of ducts
   7.5 Perforated plate
8 Conditioning
   8.1 General
   8.2 Hygroscopic sealing materials
9 Application of instrumentation
   9.1 Thermocouples
   9.2 Pressure
   9.3 Oxygen measurements
   9.4 Observations on reduction of cross-section
10 Test procedure
   10.1 Pre-test calibration
   10.2 Leakage measurement at ambient temperature
   10.3 Fire test
11 Performance criteria
   11.1 General requirements
   11.2 Criteria at ambient temperature
   11.3 Criteria under fire conditions
12 Test report
13 Direct field of application of test results
   13.1 General
   13.2 Vertical and horizontal ducts
   13.3 Sizes of ducts
   13.4 Pressure difference
   13.5 Number of sides of duct
Annex A (informative) Surface temperature and volume/mass flow
        measurements
Bibliography

This Part of this European Standard specifies a test method for determining the fire resistance of smoke extraction ducts. It is applicable only to smoke extraction ducts that pass through another fire compartment from the fire compartment to be extracted in case of fire. It represents fire exposure of a fully developed fire.

Committee
CEN/TC 127
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
UNE-EN 1366-8:2005 Identical
NF EN 1366-8 : 2005 Identical
NBN EN 1366-8 : 2004 Identical
NEN EN 1366-8 : 2005 Identical
NS EN 1366-8 : 1ED 2004 Identical
I.S. EN 1366-8:2004 Identical
PN EN 1366-8 : 2006 Identical
SN EN 1366-8 : 2005 Identical
UNI EN 1366-8 : 2005 Identical
BS EN 1366-8:2004 Identical
DIN EN 1366-8:2004-10 Identical

NF EN 12101-7 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
BS EN 13063-2:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions
EN 13063-1:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
UNI EN 15423 : 2008 VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS
BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
BS EN 15423:2008 Ventilation for buildings. Fire precaution for air distribution systems in buildings
DIN EN 1366-9:2008-08 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
15/30300929 DC : 0 BS EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
DIN EN 15423 E : 2008 VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS
05/19971310 DC : DRAFT JAN 2005 EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
UNI EN 1366-9 : 2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
S.R. CEN/TR 12101-4:2009 SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
DIN EN 13063-2 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts
I.S. EN 1366-1:2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN 13501-4:2016 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
I.S. EN 13063-2:2005 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
DIN EN 1366-1:2014-12 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN 13063-1:2006 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
BS 6336:1998 Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
DIN EN 1366-10:2011-07 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
UNE-EN 1366-10:2016 Fire resistance tests for service installations - Part 10: Smoke control dampers
14/30291693 DC : 0 BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS
I.S. EN 1366-10:2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
UNE-EN 12101-7:2013 Smoke and heat control systems - Part 7: Smoke duct sections
DIN EN 12101-8:2011-08 Smoke and heat control systems - Part 8: Smoke control dampers
14/30291624 DC : 0 BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
BS EN 12101-8:2011 Smoke and heat control systems Smoke control dampers
04/30124512 DC : 0 EN 1366-9 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
BS EN 13501-4 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
UNI EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
UNE-EN 13501-4:2007 Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
BS EN 1366-10 : 2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
04/30124515 DC : 0 EN 1366-10 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
BS ISO 21927-7:2017 Smoke and heat control systems Smoke ducts sections
CEN/TR 12101-4:2009 Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
08/30176919 DC : DRAFT SEP 2008 BS EN 1366-1 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
I.S. EN 1366-9:2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
I.S. EN 12101-8:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
UNI EN 12101-8 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
I.S. EN 12101-7:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
PREN 13501-4 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
ISO 21927-8:2017 Smoke and heat control systems — Part 8: Smoke control dampers
I.S. CEN TR 12101-4:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
DIN EN 13063-1 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
BS EN 1366-1:2014 Fire resistance tests for service installations Ventilation ducts
UNE-EN 1366-1:2016 Fire resistance tests for service installations - Part 1: Ventilation ducts
BS EN 13063-1:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance
EN 15423:2008 Ventilation for buildings - Fire precautions for air distribution systems in buildings
EN 1366-9:2008 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
EN 1366-10:2011+A1:2017 Fire resistance tests for service installations - Part 10: Smoke control dampers
01/541305 DC : DRAFT OCT 2001 BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS
UNE-EN 12101-8:2015 Smoke and heat control systems - Part 8: Smoke control dampers
DIN EN 15423:2008-09 VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS
DIN EN 12101-7:2011-08 Smoke and heat control systems - Part 7: Smoke duct sections
BS EN 1366-9:2008 Fire resistance tests for service installations Single compartment smoke extraction ducts
UNI EN 1366-10 : 2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
BS ISO 21927-8:2017 Smoke and heat control systems Smoke control dampers
UNI EN 12101-7 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
I.S. EN 15423:2008 VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS
ISO 21927-7:2017 Smoke and heat control systems — Part 7: Smoke ducts sections
EN 13501-4:2016 Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
EN 13063-2:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
DIN EN 13063-1:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
EN 12101-8:2011 Smoke and heat control systems - Part 8: Smoke control dampers
DIN EN 13063-2:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS

ISO 10294-3:1999 Fire resistance tests Fire dampers for air distribution systems Part 3: Guidance on the test method
PREN 1507 : DRAFT 1994 VENTILATION FOR BUILDINGS - DUCTWORK - RECTANGULAR SHEET METAL AIR DUCTS - STRENGTH AND LEAKAGE - REQUIREMENTS AND TESTING
ISO 13943:2017 Fire safety — Vocabulary
EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
EN 1363-1:2012 Fire resistance tests - Part 1: General Requirements
ISO 5221:1984 Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.