• There are no items in your cart

EN 14034-1:2004+A1:2011

Current
Current

The latest, up-to-date edition.

Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
Published date

01-12-2011

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus
5 Dust sample
6 Test procedure
7 Calibration and verification
8 Safety precautions/instructions for use
9 Alternative test equipment/procedures
10 Test report
Annex A (normative) - Electro pneumatic valve
Annex B (normative) - Dust disperser with 5 mm holes
Annex C (normative) - 20 l sphere
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 94/9/EC
Bibliography

This document describes a test method for the determination of the maximum explosion pressure of dust clouds in a closed vessel under defined initial conditions of pressure and temperature. This method is not suitable for use with recognised explosives, like gunpowder and dynamite, substances which do not require oxygen for combustion, pyrophoric substances, or substances or mixtures of substances which may under some circumstances behave in a similar manner. Where any doubt exists about the existence of hazard due to explosive properties, expert advice should be sought.

DevelopmentNote
2004 Edition Re-Issued in January 2011 & incorporates AMD 1 2011. (01/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

PREN 1127-1 : DRAFT 2017 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
11/30239006 DC : 0 BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
UNE-EN 15089:2010 Explosion isolation systems
17/30365866 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN ISO/IEC 80079-20-2 E : 2016 COR 1 2018 EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016)
I.S. EN 16009:2011 FLAMELESS EXPLOSION VENTING DEVICES
DIN EN 14373 E : 2006 EXPLOSION SUPPRESSION SYSTEMS
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 14373:2005 Explosion suppression systems
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 14373:2005 Explosion suppression systems
I.S. CEN TR 15473:0 CHARACTERIZATION OF SLUDGES - GOOD PRACTICE FOR SLUDGES DRYING
PREN 14491 : DRAFT 2011 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
12/30267131 DC : 0 BS EN 16447 - EXPLOSION ISOLATION FLAP VALVES
BS EN 16020:2011 Explosion diverters
11/30247683 DC : 0 PREN 14491 REV - DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
S.R. CEN/TR 16829:2016 FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS
I.S. EN 16020:2011 EXPLOSION DIVERTERS
UNI EN 16009 : 2011 FLAMELESS EXPLOSION VENTING DEVICES
BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
NF EN 1127-1 : 2011 EXPLOSIVES ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 14491:2012-10 Dust explosion venting protective systems
I.S. EN 13237:2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 14034-4:2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 14034-4:2011-04 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (includes Amendment A1:2011)
I.S. EN 14491:2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
VDI 2263 Blatt 5:2014-10 Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluidized bed dryers
VDI 2262 Blatt 1:2013-06 Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection
VDI 2263 Blatt 6:2017-08 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations
09/30209992 DC : 0 BS EN 16020 - EXPLOSION DIVERTERS
DIN EN 15089:2009-07 EXPLOSION ISOLATION SYSTEMS
PD CEN/TR 15473:2007 Characterization of sludges. Good practice for sludges drying
BS EN 15089:2009 Explosion isolation systems
UNI EN 15089 : 2009 EXPLOSION ISOLATION SYSTEMS
DIN EN 14491 E : 2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
ONORM EN 14373 : 2006 EXPLOSION SUPPRESSION SYSTEMS
UNI EN 14491 : 2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
UNI EN 14034-4 : 2011 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
ISO/IEC 80079-20-2:2016 Explosive atmospheres Part 20-2: Material characteristics Combustible dusts test methods
09/30208493 DC : 0 BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD)
14/30302627 DC : 0 BS ISO IEC 80079-20-2 - EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS COMBUSTIBLE DUSTS TEST METHODS
DIN EN 15089 E : 2009 EXPLOSION ISOLATION SYSTEMS
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN 16020 : 2012 EXPLOSION DIVERTERS
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 14460:2018 EXPLOSION RESISTANT EQUIPMENT
I.S. EN ISO/IEC 80079-20-2:2016 EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016)
EN 14460:2018 Explosion resistant equipment
BS EN 14034-4 : 2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
BS EN 14491:2012 Dust explosion venting protective systems
BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 14491:2012 Dust explosion venting protective systems
EN 16009:2011 Flameless explosion venting devices
EN 16020:2011 Explosion diverters
EN 15089:2009 Explosion isolation systems
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
NF EN 16020 : 2011 EXPLOSION DIVERTERS
BS EN 16009:2011 Flameless explosion venting devices
I.S. EN 15089:2009 EXPLOSION ISOLATION SYSTEMS
DIN EN 16009:2011-10 Flameless explosion venting devices
DIN EN 16020:2011-10 Explosion diverters
DIN EN 13237:2013-01 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
CEN/TR 15473:2007 Characterization of sludges - Good practice for sludges drying
DIN EN 14373:2006-01 Explosion suppression systems
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
I.S. EN 14373:2005 EXPLOSION SUPPRESSION SYSTEMS
UNE-EN 14034-4:2005 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

ISO 4225:1994 Air quality General aspects Vocabulary
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN 26184-1 : 1991 EXPLOSION PROTECTION SYSTEMS - DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR
VDI 2263 Blatt 1:1990-05 Dust fires and dust explosions; hazards, assessment, protective measures; test methods for the determination of the safety characteristic of dusts
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
ISO 1127:1992 Stainless steel tubes Dimensions, tolerances and conventional masses per unit length

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.