EN 14175-2:2003
Current
The latest, up-to-date edition.
05-07-2003
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions
4.1 Overall width of fume cupboard
4.2 Overall depth of fume cupboard
4.3 Height of work surface
4.4 Dimensions for customized fume cupboards
5 Basic safety and performance objectives
6 Materials
6.1 General requirements
6.2 Glass components
6.3 Sash
7 Basic safety requirements
7.1 General requirements
7.2 Construction
7.3 Sash
8 Airflow
8.1 Threshold values
8.2 Air flow indicator
9 Services
9.1 Outlets
9.2 Drainage
9.3 Electrical sockets
9.4 Lighting
10 Product manual
11 Marking and labelling
Annex A (informative) Conformity evaluation
Bibliography
This part 2 of EN 14175 specifies safety and performance requirements and objectives for general purpose fume cupboards. In addition, dimensions and marking of general purpose fume cupboards are specified as well as requirements on the product manual to be supplied with fume cupboards.Recommendations on the evaluation of conformity of general purpose fume cupboards with the requirements of this part 2 of EN 14175 are given in the informative annex A.For terms and definitions of fume cupboards EN 14175-1 applies. For type testing of fume cupboards EN 14175-3 applies. For microbiological safety cabinets EN 12469 applies. This part of EN 14175 does not address recirculatory filtration fume cupboards or fume cupboards for carrying out work on radioactive materials. For special purpose fume cupboards other requirements may apply.
| Committee |
CEN/TC 332
|
| DevelopmentNote |
Supersedes PREN 14175-2 (10/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 14175-2:2003 | Identical |
| SN EN 14175-2 : 2003 | Identical |
| UNI EN 14175-2 : 2004 | Identical |
| I.S. EN 14175-2:2003 | Identical |
| UNE-EN 14175-2:2003 | Identical |
| NS EN 14175-2 : 1ED 2003 | Identical |
| PN EN 14175-2 : 2006 | Identical |
| NEN EN 14175-2 : 2003 | Identical |
| NBN EN 14175-2 : 2003 | Identical |
| NF EN 14175-2 : 2003 | Identical |
| DIN EN 14175-2:2003-08 | Identical |
| PREN 14175-3 : DRAFT 2017 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| CEN/TS 14175-5:2006 | Fume cupboards - Part 5: Recommendations for installation and maintenance |
| BS EN 14175-7:2012 | Fume cupboards Fume cupboards for high heat and acidic load |
| 04/30115060 DC : DRAFT JUN 2004 | EN 14175-6 - FUME CUPBOARDS - PART 6: VARIABLE AIR VOLUME FUME CUPBOARDS |
| 17/30365068 DC : 0 | BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| I.S. EN 14175-7:2012 | FUME CUPBOARDS - PART 7: FUME CUPBOARDS FOR HIGH HEAT AND ACIDIC LOAD |
| UNE-EN 14175-7:2012 | Fume cupboards - Part 7: Fume cupboards for high heat and acidic load |
| EN 14175-3:2003 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| DIN EN 14175-6:2006-08 | Fume cupboards - Part 6: Variable air volume fume cupboards |
| VDI 2267 Blatt 16:2007-07 | Determination of suspended matter in ambient air - Measurement of the mass concentration of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, V und Zn as part of dust precipitation by atomic absorption spectrometry (AAS) |
| VDI 2262 Blatt 4:2006-03 | Workplace air - Reduction of exposure to air pollutants - Capture of air pollutants |
| 14/30302515 DC : 0 | BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| BS EN 14175-3:2003 | Fume cupboards Type test methods |
| DIN EN 14175-4:2004-12 | Fume cupboards - Part 4: On-site test methods; German version EN 14175-4:2004 |
| BS EN 14175-4:2004 | Fume cupboards On-site test methods |
| EN 14175-6:2006 | Fume cupboards - Part 6: Variable air volume fume cupboards |
| DIN EN 14175-3:2004-03 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| DIN EN 14175-7:2012-08 | FUME CUPBOARDS - PART 7: FUME CUPBOARDS FOR HIGH HEAT AND ACIDIC LOAD |
| UNI EN 14175-7 : 2012 | FUME CUPBOARDS - PART 7: FUME CUPBOARDS FOR HIGH HEAT AND ACIDIC LOAD |
| BS EN 14175-1:2003 | Fume cupboards Vocabulary |
| BS EN 14056:2003 | Laboratory furniture. Recommendations for design and installation |
| EN 14056:2003 | Laboratory furniture - Recommendations for design and installation |
| EN 14175-1:2003 | Fume cupboards - Part 1: Vocabulary |
| EN 14175-7:2012 | Fume cupboards - Part 7: Fume cupboards for high heat and acidic load |
| EN 14175-4 : 2004 | FUME CUPBOARDS - PART 4: ON-SITE TEST METHODS |
| I.S. EN 14175-3:2004 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| DD CEN/TS 14175-5:2006 | Fume cupboards Recommendations for installation and maintenance |
| I.S. CEN/TS 14175-5:2006 | FUME CUPBOARDS - PART 5: RECOMMENDATIONS FOR INSTALLATION AND MAINTENANCE |
| BS EN 14175-6:2006 | Fume cupboards Variable air volume fume cupboards |
| BS 2782-1:Method 140E:1982 | Methods of testing plastics. Thermal properties Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
| BS 5588-9:1989 | Fire precautions in the design, construction and use of buildings Code of practice for ventilation and air conditioning ductwork |
| EN 14175-1:2003 | Fume cupboards - Part 1: Vocabulary |
| BS 4142:1997 | Method for rating industrial noise affecting mixed residential and industrial areas |
| PREN 14056 : DRAFT 2000 | LABORATORY FURNITURE - RECOMMENDATIONS FOR DESIGN AND INSTALLATION |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| PREN 14175-3 : DRAFT 2017 | FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 13150 : 2001 | WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 12543-1:2011 | Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts |
| EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
| EN 13792:2002 | Colour coding of taps and valves for use in laboratories |
| ISO/IEC Guide 2:2004 | Standardization and related activities General vocabulary |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 12469:2000 | Biotechnology - Performance criteria for microbiological safety cabinets |
| EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.