EN 14298:2017
Current
The latest, up-to-date edition.
Sawn timber - Assessment of drying quality
10-25-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Drying quality specification
6 Assessment by control of drying
quality of a lot of sawn timber
Annex A (informative) - Example for an assessment
of standard drying quality 12%
This European Standard defines a method of assessment of drying quality. It applies to a lot of dried sawn timber (surfaced or not). It applies to both softwood and hardwood with a thickness not greater than 100 mm.The quality of drying is expressed in terms of moisture content: target, average of the lot and variation between the pieces of the lot.An option for specifying the degree of case-hardening is included.NOTE 1Other features related to drying, e.g. check, shake, warp, stain, etc., are specified in documents for visual grading of sawn timber or in product specifications and are not covered by this document.NOTE 2In the following the term "sawn timber" is used for all dried timber covered by this scope.
| Committee |
CEN/TC 175
|
| DevelopmentNote |
Supersedes PREN 14298. (10/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 14298 : 2018 | Identical |
| UNE-EN 14298:2018 | Identical |
| BS EN 14298:2017 | Identical |
| DIN EN 14298 E : 2005 | Identical |
| UNE-EN 14298:2006 | Identical |
| SS-EN 14298:2017 | Identical |
| SN EN 14298:2017 | Identical |
| NBN EN 14298 : 2005 | Identical |
| BS EN 14298:2004 | Identical |
| NEN EN 14298 : 2017 | Identical |
| I.S. EN 14298:2004 | Identical |
| UNI EN 14298 : 2005 | Identical |
| UNI EN 14298:2018 | Identical |
| DIN EN 14298 E : 2018 | Identical |
| NS EN 14298 : 2017 | Identical |
| SN EN 14298:2018 | Identical |
| NF EN 14298 : 2017 | Identical |
| DIN EN 14298:2016-05 (Draft) | Identical |
| I.S. EN 14298:2017 | Identical |
| ONORM EN 14298 : 2017 | Identical |
| DIN EN 14298:2018-01 | Identical |
| UNE-CEN/TS 13307-2:2010 EX | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control |
| DD CEN/TS 13307-2:2009 | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses Production control |
| DIN EN 14221 E : 2007 | TIMBER AND WOOD-BASED MATERIALS IN INTERNAL WINDOWS, INTERNAL DOOR LEAVES AND INTERNAL DOORFRAMES - REQUIREMENTS AND SPECIFICATIONS |
| DIN EN 14220 E : 2007 | TIMBER AND WOOD-BASED MATERIALS IN EXTERNAL WINDOWS, EXTERNAL DOOR LEAVES AND EXTERNAL DOORFRAMES - REQUIREMENTS AND SPECIFICATIONS |
| BS EN 13629:2012 | Wood flooring. Solid individual and pre-assembled hardwood boards |
| BS EN 14221:2006 | Timber and wood-based materials in internal windows, internal door leaves and internal doorframes. Requirements and specifications |
| I.S. EN 336:2013 | STRUCTURAL TIMBER - SIZES, PERMITTED DEVIATIONS |
| UNI CEN/TS 13307-2 : 2010 | LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL |
| I.S. EN 13629:2012 | WOOD FLOORING - SOLID INDIVIDUAL AND PRE-ASSEMBLED HARDWOOD BOARDS |
| DIN EN 13629:2012-06 | WOOD FLOORING - SOLID INDIVIDUAL AND PRE-ASSEMBLED HARDWOOD BOARDS |
| S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| UNI EN 336 : 2013 | STRUCTURAL TIMBER - SIZES, PERMITTED DEVIATIONS |
| BS EN 13227:2017 | Wood flooring. Solid lamparquet products |
| UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
| I.S. EN 13227:2017 | WOOD FLOORING - SOLID LAMPARQUET PRODUCTS |
| S.R. CEN/TS 13307-2:2009 | LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL |
| UNI EN 13629 : 2012 | WOOD FLOORING - SOLID INDIVIDUAL AND PRE-ASSEMBLED HARDWOOD BOARDS |
| BS EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications |
| UNE-EN 13629:2012 | Wood flooring - Solid individual and pre-assembled hardwood boards |
| EN 13629:2012 | Wood flooring - Solid individual and pre-assembled hardwood boards |
| UNE-EN 336:2014 | Structural timber - Sizes, permitted deviations |
| EN 14221:2006 | Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
| EN 336:2013 | Structural timber - Sizes, permitted deviations |
| EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| DIN EN 336:2013-12 | STRUCTURAL TIMBER - SIZES, PERMITTED DEVIATIONS |
| EN 13227:2017 | Wood flooring - Solid lamparquet products |
| CEN/TS 13307-2:2009 | Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control |
| DIN EN 14221:2007-01 | TIMBER AND WOOD-BASED MATERIALS IN INTERNAL WINDOWS, INTERNAL DOOR LEAVES AND INTERNAL DOORFRAMES - REQUIREMENTS AND SPECIFICATIONS |
| DIN EN 14220:2007-01 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| EN 13183-1:2002/AC:2003 | MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD |
| EN 844-4 : 1997 | ROUND AND SAWN TIMBER - TERMINOLOGY - PART 4: TERMS RELATING TO MOISTURE CONTENT |
| CEN/TS 12169:2008 | Criteria for the assessment of conformity of a lot of sawn timber |
| EN 13183-2:2002/AC:2003 | MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - ESTIMATION BY ELECTRICAL RESISTANCE METHOD |
| EN 844-3 : 1995 | ROUND AND SAWN TIMBER - TERMINOLOGY - PART 3: GENERAL TERMS RELATING TO SAWN TIMBER |
| CEN/TS 14464:2010 | Sawn timber - Method for assessment of case-hardening |
| EN 844-12 : 2000 | ROUND AND SAWN TIMBER - TERMINOLOGY - PART 12: ADDITIONAL TERMS AND GENERAL INDEX |
| EN 1438:1998 | Symbols for timber and wood-based products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.