EN 14361:2004
Current
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
Published date
11-24-2004
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling from a melt
4.1 General
4.2 Sampling procedure
4.3 Form and size of the sampling mould and of the sample
taken from liquid metal
4.4 Sampling plan
4.5 Preparation of sampling from metal melts
4.6 Requirements for a sound melt sample
4.7 Check of the sampling mould and the sampling ladle
Annex A (informative) Example for sampling from metal melts
A.1 Principle
A.2 Equipment
A.3 Procedure
A.3.1 General
A.3.2 Preparation of the sampling ladle
A.3.3 Preparation of the sampling mould
A.3.4 Sampling
Bibliography
This document specifies criteria for sampling and gives guidance on the sampling from melts in order to verify if the chemical composition of the product fabricated from a metal melt is in conformance with the specification.NOTEFor sampling from product or laboratory samples see EN 14242 or prEN 14726.
| Committee |
CEN/TC 132
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 14361:2005-02 | Identical |
| NBN EN 14361 : 2005 | Identical |
| NEN EN 14361 : 2004 | Identical |
| NS EN 14361 : 1ED 2005 | Identical |
| I.S. EN 14361:2005 | Identical |
| PN EN 14361 : NOV 2005 | Identical |
| SN EN 14361 : 2005 | Identical |
| UNI EN 14361 : 2005 | Identical |
| UNE-EN 14361:2005 | Identical |
| BS EN 14361:2004 | Identical |
| NF EN 14361 : 2005 | Identical |
| DIN EN 14361 E : 2005 | Identical |
| 06/30136505 DC : 0 | EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 754-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 1676:2010-06 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| BS EN 1301-1:2008 | Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
| BS EN 754-1:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
| BS EN 1676:2010 | Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
| UNE-EN 1676:2011 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| 06/30136240 DC : 0 | EN 12020-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| ONORM EN 754-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| NF EN 1676 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| DIN EN 755-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 1559-4:2015-05 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 546-1:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 1301-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 1559-4:2015 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| UNE-EN 1676:2011 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| I.S. EN 541:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLED PRODUCTS FOR CANS, CLOSURES AND LIDS - SPECIFICATIONS |
| I.S. EN 12020-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 683-1:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - FINSTOCK - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 755-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 06/30136187 DC : 0 | EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 06/30144982 DC : 0 | EN 1301-1 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 754-1 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 15/30324460 DC : 0 | BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 546-1:2007-03 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| DIN EN 754-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| UNE-EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| BS EN 541:2006 | Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications |
| UNI EN 1676 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| ONORM EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| EN 683-1:2006 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| UNI EN 1301-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNI EN 755-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| ONORM EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| BS EN 683-1:2006 | Aluminium and aluminium alloys. Finstock Technical conditions for inspection and delivery |
| BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 546-1:2006 | Aluminium and aluminium alloys. Foil Technical conditions for inspection and delivery |
| UNE-EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
| I.S. EN 1676:2010 | ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNI EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 546-1:2006 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| DIN EN 14726 E : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| DIN EN 12020-1:2008-06 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| DIN EN 683-1:2007-03 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| BS EN 1559-4:2015 | Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
| DIN EN 541:2007-03 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.