EN 14601:2005+A1:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
Superseded date
12-17-2021
Published date
10-06-2010
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Type test methods
6 Homologation
7 Routine tests
8 Designation
9 Marking
Annex A (normative) - Dimensions of end cocks
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2008/57/EC of the European Parliament
and of the Council of 17 June 2008 on the
interoperability of the rail system within the
Community (Recast)
Bibliography
This document is applicable to manually operated end cocks designed to cut-off the brake pipe and the main reservoir pipe of the air brake and compressed air system of rail vehicles; without taking the type of vehicles and track-gauge into consideration.This document specifies requirements for the design, dimensions, testing and certification (qualification and/or homologation), and marking.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
2005 Edition Re-issued in October 2010 & incorporates AMD 1 2010. (10/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 14601:2006 | Identical |
| ONORM EN 14601 : 2011 | Identical |
| NEN EN 14601 : 2005 + A1 2010 | Identical |
| NS EN 14601 : 2005 + A1 2010 | Identical |
| DIN EN 14601:2011-01 | Identical |
| NBN EN 14601 : 2005 + A1 2010 | Identical |
| NF EN 14601 : 2005 + A1 2010 | Identical |
| I.S. EN 14601:2005 | Identical |
| DIN EN 14601 E : 2011 | Identical |
| SN EN 14601 : 2005 + A1 2010 | Identical |
| UNI EN 14601 : 2010 | Identical |
| PN EN 14601 : 2007 + A1 2011 | Identical |
| BS EN 14601 : 2005 | Identical |
| UNE-EN 14601:2006+A1:2011 | Identical |
| BS EN 14601:2005+A1:2010 | Identical |
| DIN EN 15746-1:2016-02 (Draft) | Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015 |
| 12/30244746 DC : 0 | BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| DIN EN 15954-1:2014-06 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| BS EN 15612 : 2008 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| PREN 15734-1 : DRAFT 2007 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 16186-2:2017 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| BS EN 15746-1 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| UNE-EN 15734-1:2011 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions |
| BS EN 16839:2017 | Railway applications. Rolling stock. Head stock layout |
| 15/30279805 DC : 0 | BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| DIN EN 15020 E : 2011 | RAILWAY APPLICATIONS - RESCUE COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHODS |
| UNE-EN 15954-1:2014 | Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working |
| DIN EN 15179:2010-12 | Railway applications - Braking - Requirements for the brake system of coaches |
| 15/30324197 DC : 0 | BS EN 16186-2 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| DIN EN 15734-1:2013-09 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions (includes Corrigendum :2013) |
| 14/30270317 DC : 0 | BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| 09/30202529 DC : 0 | BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| NF EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 14198:2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
| PREN 14198 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| DIN EN 15179 E : 2010 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF COACHES |
| UNI EN 15612 : 2010 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| I.S. EN 15020:2006 | RAILWAY APPLICATIONS - RESCUE COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHODS |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| EN 15746-1:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
| UNI EN 15746-1 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| DIN EN 15612 E : 2011 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| BS EN 15954-1:2013 | Railway applications. Track. Trailers and associated equipment Technical requirements for running and working |
| UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| NF EN 15746-1 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| 12/30244740 DC : 0 | BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| 15/30270288 DC : 0 | BS EN 16839 - RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| 07/30170662 DC : 0 | BS EN 15734-1 - RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| BS EN 14198 : 2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| I.S. EN 15955-1:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
| DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| EN 15179:2007 | Railway applications - Braking - Requirements for the brake system of coaches |
| UNI EN 15955-1 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| UNI EN 15020 : 2011 | RAILWAY APPLICATIONS - RESCUE COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHODS |
| UNI EN 15954-1 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| PREN 14033-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| 14/30258493 DC : 0 | BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| NF EN 15612 : 2009 + A1 2010 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| 08/30156909 DC : DRAFT APR 2008 | BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
| I.S. EN 15954-1:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| I.S. EN 15746-1:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| EN 16839:2017 | Railway applications - Rolling stock - Head stock layout |
| BS EN 15020 : 2006 | RAILWAY APPLICATIONS - RESCUE COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHODS |
| BS EN 15179:2007 | Railway applications. Braking. Requirements for the brake system of coaches |
| DIN EN 15020:2011-01 | Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods (includes Amendment A1:2010) |
| UNE-EN 15955-1:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working |
| EN 15954-1 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| EN 16186-2:2017 | Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| EN 15955-1 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
| EN 15020:2006+A1:2010 | Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods |
| DIN EN 15955-1:2013-08 | Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working |
| I.S. EN 15734-1:2010 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| BS EN 15955-1:2013 | Railway applications. Track. Demountable machines and associated equipment Technical requirements for running and working |
| I.S. EN 16839:2017 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| BS EN 15734-1:2010 | Railway applications. Braking systems of high speed trains Requirements and definitions |
| BS EN 16186-2:2017 | Railway applications. Driver\'s cab Integration of displays, controls and indicators |
| UNI EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 15612:2008 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| DIN EN 15612:2011-01 | RAILWAY APPLICATIONS - BRAKING - BRAKE PIPE ACCELERATOR VALVE |
| DIN EN 15746-1:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working (includes Amendment A1:2011) |
| EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| UNE-EN 15746-1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
| UNE-EN 15612:2009 | Railway applications - Braking - Brake pipe accelerator valve |
| EN ISO 228-2:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| 2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
| UIC 583 : 1986 REPRINT 1995 | WAGONS - APPLICATION OF A SPECIAL MARK ON INTERCHANGEABLE PARTS |
| ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.